JVC Th A10 Instructions

9
 TV audio or DBS tuner
TV sound
Note:
¥ When connecting the DBS tuner to the TV SOUND/DBS jacks, change the source name, which will be shown on the display when
selected as the source, to ÒDBSÓ. See page 17 for details.
Digital connections ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
The center unit has three digital input terminals (one digital coaxial terminal and two digital optical terminals) and one digital output terminal
(a single digital optical terminal).
¥ The DVD and audio signals from the center...

10
Connecting the power cord
Before plugging the center unit and powered sub-woofer into an AC
outlets, make sure that all connections have been made.
Plug the power cord into an AC outlet.
The red STANDBY lamp on the center unit lights when the power
cord is plugged in.
Keep the power cord away from the connecting cables and the antenna
cable. The power cord may cause noise or screen interference.
We recommend that you use a coaxial cable to connect the FM outdoor
antenna, since it is well-shielded...

11
Parts Identification
Become familiar with the buttons and controls on the unit before use. Refer to the pages in parentheses for details.
Center unit ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
1234
56 7 8p
1POWER buftton and
STANDBY lamp (16)
2Remote sensor (10)
3Disc tray (22)
4DVD CONTROL buttons
(22~24)
5VOLUME +/ Ð button (16)
6DSP MODE /INPUT ATT.
(19, 20, 21)
7SURROUND/SOURCE
NAME (17, 21)
8SOURCE (17)
9Display window
pAudio channel lamp (19)
9
Display window
12345
6
78 9
Front panel
1Decord mode...

12
Secondary remote controlPrimary remote control
Parts Identification
Remote controls ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
w
e
r
t
y
u
i
o
;
a
s
q
p
9
8
7 6
5 4 3
2
1
1
2
3
4
5
6
7
p 9
8
1SLEEP button (20)
2ANALOG/DIGITAL INPUT button (18)
3TITLE button (24)
4SUBTITLE button (29)
5MAIN ON SCREEN button (39)
6DVD ON SCREEN button (26, 46)
7MENU button (24)
8Cursor and ENTER buttons
9THEATER POSITION button (31)
pTV VOL +, Ð button (56)
qTV/VIDEO button (56)
wPOWER buttons
AUDIO POWER button (16)...

13
Principles of operation
The system may be operated via the remote control or the buttons on the center unit, or via the menu on the screen.
Operation with the remote control
Select the appropriate mode for the remote control when using the primary or secondary remote control is used for operation.
The remote control mode is selected by pressing the source selecting buttons.
Press DVD :The number buttons and operating buttons operate in the DVD mode, enabling operation of the DVD, audio CD, and
video...

14
Principles of operation
To operate via the on-screen menu
When using the on-screen menu, first display it and then use the primary or secondary remote control unit cursor buttons (2/3/5/°), the
number buttons, and the ENTER button.
Displaying the on-screen menu ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
The method and conditions for display differ with the on-screen menu. The individual functions are described below.
On-screen menu componentsBasic operation with the on-screen menu ÑÑÑÑÑ
1. Move the pointer to...

15
On-screen menus ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
This system supports the following on-screen menus.
Opening screens
On-screen menus for using and setting up the AV amp function
On-screen menus for setting up the DVD
On-screen menus for using the disc
for Audio CD (No disc inserted)for DVD
for Video CD
CD CONTROL display
On-screen menus for using discs ÑÑÑÑÑÑÑÑ
 The disc status and items are displayed as follows on the on-screen
menus for using the disc.
DVD CONTROL display VCD CONTROL display
CD CONTROL display DVD...

16
The basic operations for this system are as follows.
IMPORTANT
Check that remote control mode selector is set to the current
position when using the primary remote control:
Set to ÒAUDIO/TV/VCRÓ to operate an audio system, TV, or VCR.
Set to ÒCATV/DBSÓ to operate a CATV converter or DBS tuner.
The system will not operate normally while in CATV/DBS mode.
To turn the system power supply
ON and OFF (standby)
From the remote controls:
Press AUDIO POWER to turn power ON.
The STANDBY lamp goes off, and the...

17
Muting the sound
Primary remote control only:
Press MUTING to mute the sound through all speakers
connected.
ÒMUTINGÓ appears on the display window and volume turns off.
To restore the sound, press MUTING again so that ÒOFFÓ appears
on the display.
¥ Pressing VOLUME +/Ð also restores the sound.
Selecting the source to play
From the remote controls:
Press one of the source selecting buttons.
DVD*Select the DVD player.
TV/DBSSelect TV sounds or DBS tuner.
VCRSelect the video component connected to the...

18
Selecting the analog or digital input
mode
When you have connected some components such as MD recorder,  the
DBS tuner and so on, using digital terminals (see page 9), you need to
change the input mode for these components to the digital input.
You can choose digital sound from the following sources: ÒMDÓ,
ÒDBSÓ, ÒAUXÓ.
Primary remote control only:
1.Press the source selecting button (TAPE/MD, AUX,
or TV/DBS) for which you want to change the input
mode from analog input to digital input....