JVC Rx330v Manual

							
1
ENGLISHE.g.) Set [QUICK RESTART] to [OFF].
1Touch the MENU button.
2Select the desired menu.
Changing the Menu Settings
3Select the desired setting.
For details on each menu, see below.
L To return to the previous screenSelect @.
MENU SETTINGS
MenusSettings: [ ] = Factory-preset
z SELF-TIMERStarts recording when the set time elapses after the SNAPSHOT button is pressed.
[OFF] /  2SEC / 10SEC
NOTES
•  You can confirm the countdown on the camcorder screen.• You can also use this to prevent vibration by the hand.
8 SHUTTER MODE
[RECORD ONE SHOT]: Records one still image at a time.
CONTINUOUS SHOOTING: Records still images continuously while the SNAPSHOT button is pressed.
NOTES
•  The interval between recording still images is approx. 0.3 seconds.• Continuous shooting may not work well depending on the SD card.• The continuous shooting speed will drop if this function is used repeatedly.
n VIDEO QUALITYEnables you to set the picture quality for videos.ULTRA FINE / [FINE] / NORMAL / ECONOMY
n IMAGE QUALITYEnables you to set the picture quality for still images.[FINE] / STANDARD
p GAIN UPGAIN UPMakes the subject appear bright automatically when you record in dark places. However, the overall color tones appear greyish.
OFF: Disables the function.
[ON]: Activates the function. 
						

							


Changing the Menu Settings (Continued)
MenusSettings: [ ] = Factory-preset
! SELECT ASPECT RATIOEnables you to select the aspect ratio for videos.
[16:9]: Records videos in 16:9 size. 
4:3: Records videos in 4:3 size.
NOTES
•  If the [VIDEO QUALITY] is set to [ECONOMY], you cannot record in 16:9 size.• If you want to copy the recorded videos onto DVD discs, it is recommended not to mix 16:9 size videos and 4:3 size videos.• If you record videos in 16:9 size, the aspect ratio of the video may be incorrect when watching the videos on TV. If this occurs, change the settings in [SELECT TV TYPE]. (Z  pg.  63)
@ ZOOMZOOMEnables you to set the maximum zoom ratio.
35X / [70X] / 800X
NOTEOptical zoom is used up to 35X. Digital zoom is used from more than 35X up to the selected zoom ratio.
q DISDISCompensates for hand shake.
OFF: Disables the function.
[ON]: Activates the function.
NOTES
•  Accurate stabilization may not be possible if hand shake is excessive, or depending on the shooting conditions.• Set this mode to [OFF] when recording with the camcorder on a tripod.
o WIND CUTReduces noise caused by wind.[OFF]: Disables the function.
ON: Activates the function. 
						

							


ENGLISH
MenusSettings: [ ] = Factory-preset
BASIC SETTINGSSelect [BASIC SETTINGS], then select sub-menus.
& QUICK RESTARTEnables the camcorder to start up quickly when you turn the power off and then on again within five minutes by closing and opening the LCD monitor. (“Power-linked operation” Z pg.  12)
OFF: Disables the function.
[ON]: Activates the function.
NOTES
•  This function is not available during charging.• Access/charge lamp blinks when this function is activated and the camcorder is turned off.
B MONITOR BRIGHTEnables you to set the brightness of the LCD monitor.
Adjust the brightness of the display by using the touch sensor.
C MONITOR BACKLIGHTEnables you to adjust the brightness of backlight on the monitor.
BRIGHTER / STANDARD / [AUTO]
NOTEWhen you select [AUTO], the brightness will automatically be set to [BRIGHTER] when you use the camcorder outdoors and to [STANDARD] when you use the camcorder indoors.
; DATE DISPLAY STYLEDATE DISPLAY STYLEEnables you to set the date and time display format.
DATE STYLE:year.month.day / [month.day.year] / day.month.yearTIME:24h / [12h]
9 LANGUAGELANGUAGEEnables you to set the display language. (Z  pg.  18)
You have a choice of 7 languages. (Z pg.  70) The default language is [ENGLISH].
[ DEMO MODEDEMO MODEIntroduces special features of the camcorder at the following cases.• When the menu screen is closed.• When there is no operation for 
about 3 minutes during recording 
mode.
OFF: Disables the function.
[ON]: Activates the function.
NOTES
•  The demonstration only works when the DC cord is connected, not with the battery.• If an SD card is in the camcorder, demonstration will not take place even if the power is on.
\ OPERATION SOUNDTurns the operation sound on/off.
OFF: Turns off the operation sound.
[ON]: The melody sounds when any operation is performed.
# SELECT TV TYPEEnables you to select the TV type when watching files recorded on the camcorder on TV.
4:3 TV / [16:9 TV] 
						

							

MenusSettings: [ ] = Factory-preset
BASIC SETTINGSSelect [BASIC SETTINGS], then select sub-menus.
( AUTO POWER OFFIf the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to conserve power.
OFF: Disables the function.
[ON]: Activates the function. To turn the camcorder on again, close the LCD monitor and open it again when using the battery pack. When using the AC adapter, perform any operation such as zooming.
% DISPLAY ON TVDisplays the camcorder’s on-screen display on TV.
[OFF]: Does not display on TV.
ON: Displays on TV.
NOTEThis setting is available only if the TV is connected with the AV/S-Video cables.
Z FACTORY PRESETReturns all the camcorder settings to their default values.
YES: Performs the function.
NO: Cancels the function.
: CLOCK ADJUSTEnables you to set the time. ( Z pg. 18)DATE / TIME
- VIDEO NO. RESET. IMAGE NO. RESETBy resetting the file number (name), a new folder will be made. The new files will be stored in the new folder.It is convenient to separate the new files from previously recorded files.
YES: Performs reset.
NO: Cancels reset.
NOTEEven if you select [YES], you can cancel the process by selecting [STOP].
, FORMAT SD CARDYou have to format newly purchased SD cards with this camcorder before using them. This will also ensure stable speed and operation when accessing the SD card.
[FILE]: Initializes all files in the SD card.
FILE + MANAGEMENT NO: Initializes all files and management numbers in the SD card.
Changing the Menu Settings (Continued) 
						

							

ENGLISHThe camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly.
The following phenomena are not malfunctions.• The camcorder heats up when it is used for a long time.• The battery heats up during charging.• When playing back a video file, the image stops momentarily or the sound is interrupted at junctions between scenes.
• To solve the problem, first follow the instructions below.• If the problem is not solved, reset the camcorder. (Z  below)• If the problem persists, please consult your nearest JVC dealer.L To reset the camcorder
1)   Close the LCD monitor to turn off the 
camcorder and remove the power supply (battery pack or AC adapter) from the camcorder, then reattach it.
2)   Select [FACTORY PRESET] from the 
MENU. (Z pg.  64)
TroubleActionZ
Power
No power is supplied.• Connect the AC adapter securely.• Detach the battery pack once again and reattach it firmly.• Replace the dead battery with a fully charged one.
1717–
No display appears.
• If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to conserve power. To turn the camcorder on again when using the battery pack, close the LCD monitor and open it again. When using the AC adapter, perform any operation such as zooming.• Adjust the brightness of the LCD monitor.
–
63
The displayed amount of remaining battery power differs from the actual operating time.
• Fully charge the battery, and then run it down. If the problem persists, the battery is worn out and needs to be replaced. Please purchase a new one.
17
The power does not turn on, or the battery operation time is extremely short even after the battery is fully charged.
• Make sure to use the camcorder under appropriate operating temperatures.• The battery is worn out and needs to be replaced. Please purchase a new one.
72
–
The power/charge lamp on the camcorder does not light during charging.
• Charging may stop in places subject to extremely high/low temperatures to protect the battery. It is recommended to charge it in places with a temperature of 10°C to 35°C (50°F to 95°F).• When the battery is already fully charged, the lamp does not light. Check the remaining battery power.
–
19
Troubleshooting
FURTHER INFORMATION 
						

							

Troubleshooting (Continued)
TroubleActionZ
Displays
Images on the LCD monitor appear dark or whitish.
• Adjust the brightness and angle of the LCD monitor.• When the LED light reaches the end of its service life, images on the LCD monitor become dark. Consult your nearest JVC dealer.
63–
Colored bright spots appear on the LCD monitor.
• The LCD monitor is made with high precision technology. However, black spots or bright spots of light (red, green or blue) may appear constantly on the LCD monitor. These spots are not recorded on the picture. This is not due to any defect of the unit. (Effective dots: more than 99.99%)
–
Aspect ratio of the image is strange when watching images on TV.
• Change the settings in [SELECT TV TYPE] to match the aspect ratio of the image with the screen size of the connected TV.
63
Recording
Recording cannot be performed.• SD card is full. Delete unnecessary files or replace the SD card.33
Vertical lines appear on recorded images.• Such a phenomenon occurs when shooting a subject illuminated by bright light. This is not a malfunction.–
The LCD monitor becomes red or black for an instant.
• Such a phenomenon occurs when shooting under direct sunlight. This is not a malfunction.–
During recording, the date/time does not appear.
• Touch the DISP button once.15
The LCD monitor indications blink.
• Certain modes of program AE, effect, DIS and other functions that cannot be used together are selected at the same time.
–
Digital zoom does not work.
• Change the settings in [ZOOM].• Digital zoom is not available in the still image recording mode.
62–
The focus is not adjusted automatically.• Set [FOCUS] to [AUTO].• Clean the lens and check the focus again.2669
The color of the image looks strange.
• Wait to become natural color. The camcorder adjusts the white balance automatically but it takes a time.• Try manual white balance adjustment.• In bright places, setting [PROGRAM AE] to [NIGHT] or a slow speed is not recommended.• When the recorded image is too dark, try backlight compensation or adjust brightness.• When the recorded image is too bright, try adjust brightness.
–
27–
25, 26
26 
						

							

ENGLISHTroubleActionZRecordingWhite balance setting cannot be activated.• Do not select the sepia (SEPIA) or monotone (MONOTONE) mode before setting white balance.27
The continuous shooting speed is slow.
• The continuous shooting speed will drop after repeated continuous shots, depending on the SD card or under certain recording conditions.
–
PlaybackPlayback cannot be performed.• To watch images on a TV, set the TV’s input mode or channel that is appropriate for video playback.32
The same image is displayed for a long time during video playback, or motion is choppy.
• Replace the SD card. (When the surface of the card is damaged, difficulty in reading the data occurs.)• Format the SD card.
–
64
Other problems
Files cannot be deleted.• Remove protection from the files and delete them.34
The data process is too slow after the power is switched on or the mode is changed.
• There is a large number of still images (approx. 1,000 or more) stored in the SD card. Copy the stored files to other devices, and delete them from the SD card.
33
The SD card cannot be removed from the camcorder.
• Push the SD card in a few more times.20
The [CREATE DVD] screen is displayed in the LCD monitor, and no other operations can be performed.
• Another operation is being attempted while a DVD burner that is turned on is connected. Turn off the camcorder connected to the DVD burner, or disconnect the USB cable.
–
The touch sensor or sensor button does not function.
• Touch the sensors with your finger. The sensors do not function if you touch them with your fingernail or with gloves on.
8 
						

							

IndicationMeaning/ActionZ
 (Battery indicator)
• Displays the remaining battery power.–
• As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically.
–
SET DATE/TIME!• Appears when the date/time is not set.18
CHECK LENS COVER• Appears for 5 seconds after power is turned on in recording mode if the lens cover is closed or when it is dark.–
MEMORY CARD ERROR!• Turn off the camcorder. Remove the SD card and insert it again. Turn on the camcorder after inserting the SD card. If the error message appears again, replace the card with one that is confirmed to operate correctly.
20
VIDEO MANAGEMENT FILE IS DAMAGED. RECOVERY IS REQUIRED TO RECORD/PLAYBACK. RECOVER?
• The video management file is damaged. Recovery is required to record or play back video files. Select [YES], then touch the OK button to recover the video management file.
–
RECORDING FAILURE
• The writing speed of SD card is slow, or the SD card is corrupted. Use an SD card that is confirmed to operate correctly.• Appears when the SD card is full and recording is not possible. Delete unnecessary files, or replace the SD card.
20
33
POWER IS OFF, OR USB DEVICE IS UNSUPPORTED
• Appears when an incompatible USB device is connected to the camcorder.• Appears when a DVD burner that is switched off is connected. If you want to use the DVD burner, switch the power on.
–
–
RECORDING MAY NOT BE CORRECT ON THE MEMORY CARD
• Confirm the operation procedure and try recording again.• Replace the SD card.––
Warning Indications
HighExhausted 
						

							

ENGLISHCleaning
Before cleaning, turn off the camcorder and remove the battery pack and AC adapter.
L To clean the exteriorWipe gently with a soft cloth. If the camcorder is particularly dirty, dip the cloth into diluted mild soap and wring it out well before wiping. Then wipe again with a dry cloth.
L To clean the LCD monitorWipe gently with a soft cloth. Be careful not to damage the monitor.
L To clean the lensWipe gently with lens cleaning paper.
NOTES
•  Avoid using strong cleaning agents such as benzine or alcohol.• Mold may form if the lens is left dirty.• When using a cleaner or chemically treated cloth, refer to the cautions for each product. 
						

							
0
Camcorder
L For generalPower supplyDC 11 V (Using AC adapter)DC 7.2 V (Using battery pack)Power consumptionApprox. 2.3 W** When the LED light is off and the monitor backlight is set to [STANDARD] mode.Dimensions (W x H x D)54 mm x 68 mm x 111 mm(2-3/16" x 2-11/16" x 4-3/8")WeightApprox. 225 g (0.50 lbs)(incl. grip belt)Approx. 270 g (0.60 lbs)(incl. battery and grip belt)Operating temperature0°C to 40°C (32°F to 104°F)Operating humidity35% to 80%Storage temperature–20°C to 50°C (–4°F to 122°F)Pickup1/6" (680,000 pixels) CCDLensF 1.8 to 4.0, f = 2.2 mm to 77.0 mm,  35:1 power zoom lensFilter diameterø30.5 mmLCD monitor2.7" diagonally measured, LCD panel/TFT active matrix systemSpeakerMonauralLED LightWithin 1.5 m (4.9 ft)(recommended shooting distance)LanguageEnglish/French/Spanish/Portuguese/Japanese/Korean/Traditional Chinese
L For video/AudioFormatSD-VIDEORecording/Playback formatVideo: MPEG-2
Audio: Dolby Digital (2 ch)
Signal formatNTSC standardRecording mode (video)ULTRA FINE: 720 x 480 pixels, 8.5 Mbps (VBR)FINE: 720 x 480 pixels, 5.5 Mbps (VBR)NORMAL: 720 x 480 pixels, 4.2 Mbps (VBR)ECONOMY: 352 x 240 pixels, 1.5 Mbps (VBR)Recording mode (audio)ULTRA FINE: 48 kHz, 384 kbpsFINE: 48 kHz, 384 kbpsNORMAL: 48 kHz, 256 kbpsECONOMY: 48 kHz, 128 kbps
L For still imageFormatJPEGImage size640 x 480Picture quality2 modes (FINE/STANDARD)
L For connectorsAV outputVideo output: 1.0 V (p-p), 75 ΩAudio output: 300 mV (rms), 1 kΩUSBMini USB type A and B, USB 2.0 compliant
AC Adapter
Power requirementAC 110 V to 240 Vd, 50 Hz/60 HzOutputDC 11 V § , 1 A
Design and specifications subject to change without notice.
Specifications