JVC R S11 Manual

ENGLISH
15EXTERNAL DEVICES
[Press]  Select track
[Hold]  Reverse/fast-forward track
MP3: Select foldersAfter pressing M MODE, press the following buttons...
Skip 10 tracks
MP3: Within the same folder
TRACK RPT:
  Repeat current track
FOLDER RPT:
  MP3: Repeat all tracks of current 
folder
DISC RPT:
  Repeat all tracks of the current disc
FOLDER RND:
  MP3: Randomly play all tracks of 
the current folder, then tracks of the 
next folder
DISC RND:
  Randomly play all tracks of current 
disc
ALL RND:...

ENGLISH
16
Listening to the iPod
  Selecting a track from the menu
1  Enter the main menu.
  This mode will be canceled if no operations are 
done for about 5 seconds.
2  Select the desired menu.
 PLAYLISTS 
Ô ARTISTS Ô ALBUMS Ô 
SONGS 
Ô GENRES Ô COMPOSERS Ô (back 
to the beginning)
3  Confirm the selection.
  •  To move back to the previous menu, press 
5.
  •  If a track is selected, playback starts 
automatically.
  •  Holding 
4 /¢  can skip 10 items at a 
time.
Pause/stop playback
•  To resume...

ENGLISH
17EXTERNAL DEVICES
Listening to the other external components
You can connect an external component to:
•  CD changer jack on the rear of this unit using the following adapters (separately purchased):
 – Line Input Adapter, KS-U57
 – AUX Input Adapter, KS-U58
 Preparation: Make sure “EXT INPUT” is selected for the external input setting, see page 21.
•  AUX (auxiliary) input jack on the control panel.
1Select “EXT INPUT” or “AUX IN.”
2—Turn on the connected component and start playing the...

ENGLISH
18
3  Select a tone.
4  Adjust the sound elements of the selected 
tone.
 
1  Adjust the frequency.
 
2  Adjust the level.
Selecting a preset sound mode
You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).
Preset value setting for each sound mode
Sound 
modePreset value
BASS (bass)MID (mid-range)TRE (treble)LOUD
(loudness)
Freq. Level Q Freq. Level Q Freq. Level Q
USER60 Hz 00 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz 00 Fix
OFF ROCK100 Hz +03 Q1.0 1.0 kHz 00 Q1.25...

ENGLISH
19SETTINGS
FADER *2
Adjust the front and rear speaker 
balance.R06 to F06
BALANCE *
3
Adjust the left and right speaker 
balance.L06 to R06
LOUD *
4 (loudness)
Boost low and high frequencies to 
produce a well-balanced sound at a 
low volume level.LOUD ON or 
LOUD OFF
SUB.W *
1 (subwoofer)
Adjust the subwoofer output level.00 to 08, 
initial: 04
VOL ADJ (volume adjust)
Adjust the volume level of each source 
(except FM), compared to the FM 
volume level. The volume level will 
automatically...

ENGLISH
20
3  Adjust the PSM item selected.
4  Repeat steps 2 and 3 to adjust other PSM 
items if necessary.
5  Finish the procedure.
You can change PSM (Preferred Setting Mode) items 
listed in the table below and on page 21.
1  Enter the PSM settings.
2  Select a PSM item.
General settings — PSM
IndicationsItem
(       : Initial)Setting, [reference page]
DEMO
Display 
demonstration• DEMO ON
• DEMO OFF:  The display demonstration will be activated automatically if no 
operation is done for about 20...

ENGLISH
21SETTINGS
IndicationsItem
(       : Initial)Setting, [reference page]
DIMMER
Dimmer• AUTO
• ON
• OFF:  Dims the display and button illumination when you turn on the 
headlights.
:  Activates dimmer.
:  Cancels.
SCROLL *
2
Scroll • ONCE
• AUTO
• OFF:   Scrolls the displayed information once.
:   Repeats scrolling (at 5-second intervals).
:   Cancels. 
•  Pressing DISP for more than one second can scroll the display 
regardless of the setting.
L/O MODE
Line output mode• REAR
• SUB.W:  Select if...

ENGLISH
22SETTINGS
 AUTO ANSWER
ON:  The unit answers the incoming calls 
automatically.
OFF:  The unit does not answer the calls 
automatically. Answer the calls manually.
REJECT:  The unit rejects all incoming calls.
 MSG NOTICE (message notice)
ON *1:  The unit informs you of the arrival of 
a message by ringing and displaying 
“RCV MESSAGE” (receiving message).
OFF:  The unit does not inform you of the arrival of 
a message.
 MIC SETTING (microphone setting)
Adjust the built-in microphone volume,...

ENGLISH
23SETTINGS & REFERENCES
Continued on the next page
Title assignment
You can assign titles to 30 station frequencies (FM and 
AM) using 8 characters (maximum) for each title.
1  Select a station you want to assign a title 
(see also page 8).
2  Show the title entry screen.
3  Assign a title.
 
1  Select a character.
 
2  Move to the next (or previous) character 
position.
 
3  Repeat steps 1 and 2 until you finish 
entering the title.
4  Finish the procedure.
To erase the entire title
In step 2...

ENGLISH
24
•  When a disc is inserted upside down, “PLEASE” and 
“EJECT” appear alternately on the display. Press 
0 to 
eject the disc.
•  In this manual, words “track” and “file” are 
interchangeably used.
•  While fast-forwarding or reversing on an MP3 or 
WMA disc, you can only hear intermittent sounds.
•  If you change the source while listening to a disc, 
playback stops.
  Next time you select “CD” as the playback source, 
playback will start from where it had been stopped 
previously.
•  After...