JVC Projector Dla X90rkt Instructions Manual

							51
ENGLISH
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Menu operation procedure
1 Press MENU.
The main menu is displayed on the screen.
Picture Adjust
ResetAdvancedExitMENU BACKBack
Select Operate
Color Temp.
Gamma
Dark/Bright Level
Picture Tone
ContrastBrightness
Color
Tint00
00
Color ProfilePicture ModeNatural
Video
6500KNormal
The submenu items, which are currently selected, are shown. Currently selected menu items are highlighted and the icon is colored in orange. 
The submenu items, which are currently selected, are displayed.
This displays the remote control operation guide.
Example: Picture  Adjust  
2 Press cursor  ( / ) to select a submenu.
●   A  submenu (picture adjust, input signal, installation, display 
setup, function, information) is selected:
● If one selects "Information", information about the currently 
selected video input and PC input  are displayed at the bottom 
of the menu.
3 Press OK or cursor ( /).
● Sub-menu item is displayed.
● Sub-menu items vary depending on the input signal and the 
picture mode. See "Content menu" on the next page for more 
details. 
4   Press the cursor ( /) to select the items to 
adjust.  
If the name of a submenu item is displayed in a dimmed manner , 
it cannot be selected.
5  Press cursor ( / ) to change settings.
6  
After adjusting, press BACK. 
Every time it is pressed, you will return to the respective previous 
menu screen.
7   Repeat steps 6-2 to adjust other items.
After all adjustments are done, press MENU, and the menu 
disappears from the screen.
STANDBY/ON
MENUBACK
INPUT
OK
BACK
HIDE
LIGHT
   LENS 
MEMORYANAMO.
  PC
HDMI 1
STAND BY
     3D 
FORMAT
HDMI 2
COMP.
LENS.CONTROL
MENU
GAMMAP.FILE
COLORADJ. PIC.
      ON
FILM
NATURALSTAGE
3D
THX USER   C.M.D.ANIME
CINEMAPICTURE MODE
INPUT
TEMP
COLOR
     3D 
SETTING
1
1
2,5
2,5
3,4
3,4
3
3
6
6
ExitMENU
BACKBack
Select Operate
160H
HDMI-2
1080p60
8bitInput
Source
Deep Color 
Lamp Time
12.011Soft Ver.
Information
：
：
：
：
：
ExitMENU BACKBack
Select Operate
Lamp Time Deep Color 160H
PC
1920X1080Information
Resolution 　　
67.50kHzH Frequency60.0HzV Frequency　  　　　　　
Input
：
：
：
：
：
：
8bit
12.011Soft Ver.
：
Example: When inputting 
PC signals
Example: Input of signals 
other than PC signals
X730: The same button 
arrangement is used for the 
operations in this explanation.
9070
9070 
 Operation    
						

							52
Operation
3
Adjustments and settings in the menu (continued)
Menu item description
All numbers for the items within [  ]are default settings.
●  It is possible to operate all items displayed in the menu display by pre\
ssing OK/BACK or the cursor (up, 
down, left, right arrows).
●  Displayed items vary depending on the selected item in the menu and type\
 of input signal or absence of any signal.
[1] Picture Adjust
Adjust the video image contents and projector projection environment pic\
ture to 
your preferred color, gamma, brightness and other settings.
Use the UP and DOWN keys to select items. Press the [BACK] key to return to 
Items                                Explanation, operation, precautions, settings
Picture Mode Please refer to the description of each mode, and then use the mode to b\
est suited for 
you. Moreover, it is possible to adjust the image quality by using a User 1-5. 
 
Settings: Film, Cinema, Animation, Natural, Stage, 3D, THX, User 1-5.
 [Natural]
Film This quality setting is similar to the texture of the film setting. It is suitable for watching 
movies in general.
Cinema This image setting is based on the DCI standard and brings to life brigh\
tly colored 
pictures. Suitable for viewing action movies and brightly colored images\
.
DCI: Shorthand for Digital Cinema Initiatives.
Animation An image quality setting for watching animation movies and the like.
Natural It is an image quality setting with natural color/tone. Suitable for vie\
wing video material, 
such as dramas/serials.
Stage This image quality setting is suitable for watching of live events, e.g.\
 on a stage. 
3D This is an image quality setting for watching 3D movies. 
THX 
9070  It is an image setting certified by the company THX. 
User 1
User 2
User 3 
User 4
User 5 The User 1-5 should adjust the image quality as desired in each case. Da\
ta of the last 
adjustment is saved. Edit to set your preferred your username using the \
"
[1-2] Advanced" 
"User Name Edit" function.
Color Profile It selects a color profile to suit the input source. Depending on the settings, the items that 
can be set in the "Picture Mode" vary. (See Table 1) 
The color profile is selected based on the video production. We recommend to match the 
color profile of the video you want to watch.
(*) If you select "Off", it is impossible to perform any picture adjust for other color temp.\
 
other than "Lamp power" and "Lens aperture" under "Advance", and also no\
t gamma or 
sharpness.
Setting: Film 1, Film 2, Cinema 1, Cinema 2, Standard, Anime 1, Anime 2, Video, Vivid, 
Adobe, Stage, 3D, Off, Custom 1-5.
                 [Depending on the picture mode, the default values will\
 change. (See Table 1)]
Film 1 This is a profile that comes close to a color space that resembles using a Xenon lamp to 
transmit a film used for movies by the Eastman Kodak Company. 
Film 2 This is a profile that comes close to a color space that resembles using a Xenon lamp to 
transmit a film used for movies by the FUJIFILM Corporation.
Cinema 1 This is a profile that resembles the color space of the DCI standard.
Cinema 2 This is a profile that resembles the color space of HDTV.
Standard It is a profile with an especially rich representation of the film-specific colors.
HDTV: Shorthand for High Definition Television.
ResetAdvanced
Color Temp.
Gamma
Dark/Bright Level
Picture Tone
ContrastBrightness
Color
Tint00
00
Color ProfilePicture ModeNatural
Video
6500KNormal
the previous screen.
9070     
						

							53
ENGLISH
Anime 1This is a profile suitable for CG-animations, which can be often found in Hollywood-produced animated series.It is intended for animations with multiple bright colors.
Anime 2This is a profile suitable for animation cel-style animation series, which are common in Japan.It is intended for animations with many dim colors.
VideoThis profile is suitable e.g. for TV / drama / sports. 
VividThis is a profile with rich sense of color, which makes it suitable for games. 
AdobeThis is the color profile for Adobe RGB. 
(*) Adobe, and the Adobe logo are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.  
StageThis profile is suitable for live music, orchestra and opera concerts, theater , etc.
3DThis is the most suitable profile when using 3D-glasses.
OffIt is a mode that does not adjust the color management. 
Custom 1Custom 2Custom 3Custom 4Custom 5
You can install the color profile supplied by this JVC. The name changes after installation. 90
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
[T able 1]  The setting contents and default values of the color profiles for the picture mode
Pic tu re  M ode
Film  Cinema AnimeNatural Stage 3D  THX User 1, 2,3,4,5
Color Profile
Film 1  Cinema 1 Anime 1  V ideo   Stage3D  THX  Everything is displayed except for Film 1,2 and  THX.
Film 2Cinema 2Anime 2VividStandardStandard
StandardStandardAdobeVivid  
Standard      
  This is the default value according to the picture mode. 
 Operation    
						

							54
Operation3
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
Color T emp.It is possible to set the color temp.To "[1-1] Color Temp." of the submenu
GammaIt is possible to set the gamma curve. Please set to your preference.Settings: Normal, A (3D), B (3D), Film 1, Film 2, Film 3 Film 4, A, B, C, D, Custom 1, Custom 2, Custom 3  [Normal]
NormalTypically we recommend this setting.(*) You cannot configure Normal Mode when the "Picture Mode" is set to "Film" or "3D". 
A (3D)B (3D) 
A (3D), B (3D) can only be set, if the "Picture Mode" is "3D". This is a standard gamma curve for 3D.A (3D) will be brighter.
Film 1, 2, 3, 4 can only be set if the "Picture Mode" is set to "Film" .\
Film 1This is a gamma curve that approximates the characteristics of an Eastman Kodak Company film for movies.9070
Film 2This is a gamma curve that approximate the gamma curve characteristics o\
f a cinematographic film made by the FUJIFILM Corporation.
Film 3This is a gamma curve that is even more focused on tone for the gamma of\
 Film 1.
Film 4This is a gamma curve that emphasizes more contrast for the gamma of Fil\
m 2.
(*)You cannot configure A, B, C, and D when the "Picture Mode" is set to "Film" or "3D".
A
B
C
D
In regard to normal gamma, this is a gamma curve focused on tone.
This is a gamma curve for the film's unique S curve.
This is a gamma curve that – in regard to the gamma of B – emphasized even more the feeling of contrast.
For normal, this is a gamma curve where the intermediate gradations look\
 very bright.
Custom 1Custom 2Custom 3
(*) Custom 1, 2, 3 cannot be configured during 3D signal input and when the "Picture Mode" is set to 3D.
Under submenu "[1-2-2] Custom Gamma", it is possible to change the gamma curve and save it.
The initial value of Custom 1, 2, and 3 is the same as for "Normal".
Dark/Bright LevelCompensating darkness / brightness of an area.
(*) It is possible to set it unless the "Picture Mode" is set to "Film\
". 
Dark LevelSettings: (makes dark areas darker) -7 to 7 (brightens dark areas)  [0]
Bright LevelSettings: (darkens bright areas) -7 to 7 (makes bright areas brighter\
) [0] 
Picture ToneYou can reproduce the intensity of the exposure image.
(*) This function can be configured when the "Picture Mode" is set to "Film" and "Gamma" is set to "Film 1-4". (*) "Video Tone" is displayed when the "Picture Mode" setting is anything except "Film".
White
Red
Settings: (The more under-exposure, the darker) -16 to 16 (the more o\
ver-exposure, the brighter)  [0]
Settings: (under-exposure to for red), -16 to 16  (over-exposure for \
red)  [0]
GreenSettings: (under-exposure for green) -16 to 16 (over-exposure for gre\
en) [0]
BlueSettings: (under-exposure for blue) -16 to 16 (over-exposure for blue\
) [0]
ContrastAdjusts the contrast of the video images.Settings: (blackish) -50 50 (whitish)
BrightnessYou can adjust the brightness of the video image.Settings: (dark) -50 to 50 (bright) 
ColorAdjust the color intensity of the video images.Settings: (dim), -50 to 50 (saturated) 
TintAdjusts the image tint of the video images.Settings: (reddish) -50 to 50 (greenish)
AdvancedFunctions such as contour correction, custom gamma and color management \
can be set to sub-menu "[1-2] Advanced".
ResetSets settings to default factory settings.     
						

							55
ENGLISH
[1-1] Color Temp.
Use this function to se the video image color temperature. Adjust according to 
your preference.
(*) The settings available will vary depending on the "Picture Mode". Howeve\
r, 
settings cannot be adjusted when "Picture Mode" is set to "THX".
Use the UP and DOWN keys to select items. Press the [BACK] key to return 
to the previous screen.
Items                                Explanation, operation, precautions, settings
Preset Set the color temp. of the video images.
Please adjust to your preference.
(*) For this setting, the setting items can differ in accordance with the "Picture Mode". 
Adjustment is not possible when set to “THX".
Settings: (Preset value), Xenon1, Xenon2, Xenon3, 
High Bright, Custom 1, Custom 2, 
Custom 3 [6500]
(Preset value) The color temp. can be adjusted within the range of 5500K to 9500K in st\
eps of 500K. 
It is said that a value of 6500K produces a well balanced video image.
(*)This cannot be configured when the "Picture Mode" is set to "Film".
Settings: Between (reddish) 5500-9500 (bluish) in steps of 500K  
(Preset value)Xenon 1, Xenon 2, Xenon 3 can each be adjusted based on the dark color o\
f the video 
images.
Red
Settings: (Weak red) -50 to 50 (strong red) [0]
GreenSettings: (Weak green), -50 to 50 (strong green) [0]
BlueSettings: (Weak blue) -50 to 50 (strong blue) [0]
High Bright Select this to get the brightest image.
(*) This can be configured when the "Picture Mode" is set to "3D". 
9070
Xenon1
Xenon2
Xenon3 This reproduces the color temp. characteristics of a xenon lamp being 
used in cinemas.
(*) This can be configured only when the "Picture Mode" is set to "Film" or "Cinema".
A light source color that is emitted by a film projector.
A light source color emitted by a projector used for digital cinema.
A light source color that looks cooler than that of the Xenon2.
(Preset value) Xenon 1, Xenon 2, Xenon 3 can each be adjusted based on the dark color o\
f the video 
images.
Red
Settings: (Weak red) -50 to 50 (strong red) [0]
GreenSettings: (Weak green), -50 to 50 (strong green) [0]
BlueSettings: (Weak blue) -50 to 50 (strong blue) [0]
Custom 1
Custom 2
Custom 3 You can adjust the color temp. and save each Custom 1, 2, and 3.Please sa\
ve your 
preferred adjustment values and enjoy it.
Gain It is possible to adjust the bright part of the video images for each co\
lor.
Red
Settings: (Weak red) -255 to 0 (strong red) [0]
GreenSettings: (Weak green) -255 to 0 (strong green) [0]
BlueSettings: (Weak blue) -255 to 0 (strong blue) [0]
Offset For each color, the dark areas of the video images can be adjusted.
Red
Green
Blue
Settings: (Weak red) -50 to 50 (strong red) [0]Settings: (Weak green) -50 to 50 (strong green) [0]Settings: (Weak blue) -50 to 50 (strong blue) [0]
>Color Temp.Gain Red
Gain Green
Gain Blue
Offset Red
Offset Green
Offset Blue
Preset
Custom1
Custom2
Custom36500K
Reset
000000
Adjustments and settings in the menu (continued)
9070 
 Operation    
						

							56
Operation
3
Adjustments and settings in the menu (continued)
[1-2] Advanced
Use this function to set video image contours, overall sharpness, noise \
reduction mode and video afterimage. You can also create your preferred 
gamma and color quality.
Use the UP and DOWN keys to select items. Press the [BACK] key to return 
to the previous screen.
Items                                Explanation, operation, precautions, settings
Sharpness You can set the sharpness and detail enhance to "
[1-2-1] Sharpness" of the submenu
NR Reduces the noise of the video images. Please adjust to your preference.\
RNR Adjusts the intensity of random noise elimination of the image.
Settings: (Low) 0 to16 (strong) [0] 
MNRAdjusts the intensity of mosquito noise elimination of the video images.\
(*) It is not possible to set it when the "Picture Mode" is set to "3D\
".
Moreover, it is not possible to set it when there is an input of HD input signal\
s.
Settings: (Low) 0 to16 (strong) [0] 
BNRReduces the block noise of the video images.
(*) It is not possible to set it when the "Picture Mode" is set to "3D\
"
Moreover, it is not possible to set it when there is an input of HD input signal\
s.
Settings: On, Off [Of
f]
Color Space X730You can switch the color space display of the projector output.
Settings: Standard, Wide 1, Wide 2                                                                       [Standard] 
Standard
Wide 1
Wide 2 Equivalent to the HDTV color space
Equivalent to the color space of the DCI standard
A 
color space that is broader than Wide1
Custom Gamma It is possible to set the gamma curve and save it. Please adjust to your\
 preference.
To "[1-2-2] Custom Gamma
" of the submenu 
Color Management It is possible to set the color of the screen to the preferred color and\
 save it. 
9070To "[1-2-3] Color Management" of the submenu.
User Name Edit You can edit the "Picture Mode" User Name.
(*) No. of characters is limited to 10 
(*) You can use capital and small alphabet letters, numbers and symbols.  
User 1
User 2
User 3
User 4
User 5 Select the user name you want to edit. 
Press the [OK] key on the main unit or on the remote control to confirm and enter the edit 
mode.
(*) Press the [BACK] key on the main unit or on the remote control to \
exit edit mode.
Doing so will delete the content of your modifications.
Input cursor
Select cursor This displays the place where you will enter the characters. The cursor will move 
automatically; it cannot be moved to the left or right. 
Move the cursor using the [UP], [DOWN], [LEFT], and [RIGHT] keys on the \
main unit or 
on the remote control.
Move to the letter you want to enter and press the [OK] key on the main \
unit or on the 
remote control to set the letter at the input cursor position in the NAME field.
Clear 
All Clear  Use this function to delete a character. Move the select cursor to the desired location and 
press the [OK] key on the main unit or on the remote control. This will delete the character 
to the left of the input cursor in the Name field.
Use this function to delete all characters. Move the select cursor to th\
e desired location 
and press the [OK] key on the main unit or on the remote control. 
A
  delete confirmation 
message will appear. 
Use this function to set your name. Move the select cursor to the desire\
d location 
and press the [OK] key on the main unit or on the remote control.  A
  save confirmation 
message will appear.
>Advanced
0Lens ApertureCMD DemoClear Motion Drive User Name Edit Color Management Custom Gamma
NR
Lamp Power
Off
Off
Normal
Sharpness
OK     
						

							57
ENGLISH
Adjustments and settings in the menu (continued)
Clear Motion DriveIt improves video images with fast movements to produce clear video imag\
es with little 
residual image retention.
This cannot be set when the PC Signal/3D Signal and "[2-3] 2D/3D" are ON\
.
Moreover, it may happen that the image is distorted in some scenes, or light and\
 dark 
flashes occur. In this case, please choose "Off", etc., and then a setting of your choice. 
Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Inverse Telecine [Of
f]
OffOff
Mode 1 Black insertion weak
Mode 2 Black interpolation strong
Mode 3 Interpolation weak
Mode 4 Interpolation strong
Film Motion With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image 
footage is changed to a 24 frame display.
(*) 24p will not function.
CMD Demo It is possible to confirm the effect of the setting of Mode 3 and Mode 4 of the Clear motion 
drive. Upon pressing the button "OK", it will be displayed on all sides \
of a screen in the 
center split into two parts. Finally, it will turn to "Off”. It cannot be set for PC and 3D 
signals.
Settings: Left, right, top, Bottom, Off [Of
f]
Left The left screen displays a demonstration of the Clear motion drive.
Right  The right screen displays a demonstration of the Clear motion drive.
Top The upper screen displays a demo of the Clear motion drive.
Bottom The screen below displays a demo of the Clear motion drive.
Off The Demo of the Clear motion drive is turned off.
Lens A
perture Adjusts the amount with which the optical iris is squeezed. A setting of 0 means fully 
opened.
Settings: (Dark) -15 to 0 (bright) [0] 
Lamp PowerIt is possible to change the brightness of the lamp.
(*) If continually used with "High", the lamp will become dark earlier\
.
(*) The more one lets the interior temperature of the device rise due to gen\
eration of heat, 
the less the level of tolerance against high temperatures.
(*) For about 60 seconds after the lamp is lit, the lamp cannot be swi\
tched off.
(*) This will be "High" when the "Picture Mode” is set to "3D". 
9070(*) This will be "High" when the "Picture Mode” is set to "3D", "Film" an\
d "Cinema". X730Settings: Normal, High  [Normal]
Normal
HighNormally this setting is chosen.(160W drive)
In a bright room, when the video is hard to see, this setting is chosen.\
(220W drive)
User Name Edit
MENUBACK
>
>
NameUser 1
Clear All Clear OK
\}{][><
)(
~
|
;: ?=/-+*&%$#!^.,0987654321
zyxwvytsrqpon
lkjihgfedcba
YXWVUTSRQPON MLKJIHGFEDCBA
Z
m
@
ExitBackSelect Operate
Picture Adjust
SPACE
Select cursor
Character list Input cursor 
 Operation    
						

							58
Operation
3
Adjustments and settings in the menu (continued)
[1-2-2] Custom Gamma
    Use this function to create your preferred gamma curve.
    Select CUSTOM 1, 2 or 3 using the UP and DOWN keys, then press 
    the [OK] key to set and adjust each item. Press the [BACK] key to 
    return to the previous screen.
Items                                  Explanation, operation, precautions, settings
Custom 1~3  [1] It is possible to select a gamma curve adjustment for Custom 1, 2, a\
nd 3 under the 
"Gamma" of the picture adjust and then save it.
Please adjust to your preference.
(*) Custom 1, 2, 3 cannot be configured during 3D signal input and when the "Picture 
Mode" is set to 3D.
(*) Initial values of Custom 1, 2, and 3 are the same as for "Normal".\
(*) Please refer to the figure at the bottom of the menu in two frames for adjustment.
(*) It is recommended that you read "Gamma Curve" (Reference page: 74\
) for hints about 
adjustment.
Correction Va
 lueYou can choose to add the underlying gamma curve adjustment.
(*) Can choose any setting, as the default gamma curve will always appear linear .
Settings: Normal, A, B, C, D 
(brightens in particular dark to intermediate parts) 1.8 to 2.6 (dark\
ens in particular dark to 
intermediate parts) in the range of values with increments of 0.1 [Normal]
Gamma Adjustment The gamma curve for "green" is being displayed as being representative. If "white", "red," 
"green" or "blue" are selected, the corresponding color curves are displ\
ayed.
Place the cursor on a gamma curve with 12 points with the buttons for left and right, and 
then use the buttons for up and down buttons to move those points up or down.
White Red, green and blue can be adjusted at the same time.
Red It is possible to adjust the gamma curve of red.
Green It is possible to adjust the gamma curve for green.
Blue It is possible to adjust the gamma curve for blue.
      Reset The same data as for the "Normal" mode are used.
(*) When you exit the adjustment menu of Custom Gamma, please save the\
 adjustment 
values. 
You can return to the original data, which should be saved.
Custom GammaCorrection Value
White
Red
Green Blue
Reset1023
512
50100(%)Custom1
Custom2
Custom3
0
Normal>>
[1-2-1] Sharpness
Use this function to set video image contours and overall sharpness
according to your preference.
Use the UP and DOWN keys to select items. Press the [BACK] key to 
return to the previous screen.
Items                                
Explanation, operation, precautions, settings
Sharpness Emphasizes the outlines of video images. Please adjust to your preferenc\
e.
Settings: 0 to 50 (clear)
Detail Enhance It makes minute details of the video images stand out. Please adjust to \
your preference.
Settings: 0 to 50 (strong)
0
>>25Detail EnhanceSharpness Sharpness     
						

							59
ENGLISH
Custom Gamma
Correction ValueWhite
Red
Green Blue
Reset1023
512
50100(%)Custom1
Custom2
Custom3
0
Picture Adjust
ExitMENUBACKBackSelect Operate
Normal
>
>
(*)
Gamma curve
Gradation diagram
corresponding 
to the gamma 
curve.
Gradation at the
selected point.
Adjustments and settings in the menu (continued)
[1-2-3] Color Management
Use this function to create your preferred gamma curve.
Select CUSTOM 1, 2 or 3 using the UP and DOWN keys, then press 
the [OK] key to set and adjust each item. Press the [BACK] key to 
return to the previous screen.
Items                               
Explanation, operation, precautions, settings
Custom 1~3 Set the 7 color axis (red / orange / yellow / green / cyan / blue / mag\
enta) color as you 
like and save it then. For example you may want to change only the red c\
olor of roses. 
Please adjust to your preference. According to your adjustments, the input image in the 
background changes. It is possible to confirm the video image before adjustment by 
pressing the "HIDE" button of the remote control.
Pause It is possible to display the input video image of the background being \
adjusted as a still 
picture.
Settings: On, Off [Of
f]
On
OffFreezes the input video image.
Unfreezes the input video image.
Color Selection It is possible with the 7 colors of red, orange, yellow, green, cyan, blue and magenta to 
precisely adjust the hue, color saturation and brightness, and then save\
 it. Please adjust 
to your preference.
Axis Position Fine-tune the position of the central axis of the selected color further\
.
Settings: -30 to 30 [0]
HueAdjust the hue.Settings: -30 to 30 [0]
Saturation
Adjust the color saturation.Settings: (dim color), -30 to 30 (vivid colors) [0]
BrightnessAdjust the brightness.Settings: (dark) -30 to 30 (bright colors)  [0]
Color Management  
Color SelectionAxis Position
Hue
Saturation Brightness
Off
Custom1
Custom2
Custom30000
PauseOff
ResetRed
> >
9070 
 Operation    
						

							60
Operation3
Adju stm en ts  a n d s ettin gs in  t h e m en u ( c o ntin ued )
[2] Input Signal 
Use this function to set the appropriate specifications for the video image signals input from HDMI, COMP and PC. Set the aspect ratio and screen mask.Use the UP and DOWN keys to select items. Press the [BACK] key to return to the previous screen.(*) This becomes "[2-3]3D Setting" during 3D signal input.
Items                               Explanation, operation, precautions, settings
HDMIIt is possible to set this if one selects the HDMI terminal to the subme\
nu "[2-1] HDMI".
COMP .(*) This can be set when the HDMI terminal is selected.
Color SpaceIt configures the input signal method of the component input terminal.Settings: Y Pb/Cb Pr/Cr, RGB  [Y Pb/Cb Pr/Cr] 
Y Pb/Cb Pr/CrRGBIt is set for the component video image input signal.
It is set for the RGB video image input signal.
PC 9070This can be set if one selects the PC terminal to the submenu "[2-2] PC".
Picture PositionPlease adjust if the edges of the picture are partially missing due to t\
he timing of horizontal and vertical synchronization signals. The value of the picture position depends on the input signal.(*) Depending on the input signal, it may be the case that not everyth\
ing of the video image is displayed.(*) When there is a 3D input signal, adjustment is not possible.
Horiz.Vert.This aligns the horizontal direction of the image position.
This aligns the vertical positions of the image.
Aspect (V ideo)(*) It is displayed when there is a video signal input.(*) If set to3D, ratio is fixed to 16:9.Settings: 4:3, 16:9, Zoom  [16:9]
4:3Sets the screen size of the image to 4:3. For HD signals, left and right\
 sides are reduced.
16:9Sets the screen size of the video image screen to 16:9. For SD signals l\
eft and right sides are expanded.
ZoomZooms the video images.  (*) For HD signals, this cannot be selected.
Aspect (PC)Sets the video image screen size when there is a PC video signal input.(*) Is displayed when there is a PC signal input.Settings: Auto, 1:1, Full [Auto]
AutoPositions the video image screen in the center of the display range, to fill the screen.Depending on the size of the video screen, left and right black borders \
will be drawn.
1:1The video image screen size is displayed with the size of the input imag\
e.Depending on the input video image, the screen will become smaller or pa\
rt of the input image off the screen is cut off.
FullIt does not keep the aspect ratio of the video image screen and fills the entire screen.
Aspect(Video)
Progressive
3D Setting
 HDMI
COMP.
Mask
Auto
PC　
Picture Position
16:9 Off