JVC Projector Dla X90rkt Instructions Manual

31
ENGLISH
■ Connecting via PC Cable 9070
About the connection (Continued)
1        HDMI         2
RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUT
OK
This unit
● 
For information on supported input signals, please refer to 
“Specifications
”. (Reference page: 92)
PC cable
(sold separately
)
To PC input terminal
VGA output terminal
Notebook PC
■  
Connected by a 3D SYNCHRO terminal
1        HDMI         2
RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL...

32
Preparation
2
About the connection (Continued)
■  Connecting via Trigger Cable
1        HDMI         2
RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUTOK
This unit
     
● 
Do not supply the power to the other devices.
● Do not connect audio termina
ls of the other devices such as headphones etc. Otherwise, this may 
cause a malfunction of the other devices or injury. 
● Using beyond the rated value will cause malfunction.
● Exercise adequate caution to prevent...

33
ENGLISH
About the connection (Continued)
■ Connected by LAN terminal 
1        HDMI         2RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUT
OK
This unit
● The network is used to control the unit. It is not used for transmission of the video signal.
● 
Please contact your network administrator for questions concerning the network connection.
Network
HUB
Server
1        HDMI         2
RS-232-C
3D C
R/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON...

34
Preparation2
About the connection (Continued)
Connection of the power cord (provided)
Once you have connected the equipment, connect the projector power cord.
1        HDMI         2RS-232-C
3D CR/PRCB/PB   Y
SYNCHRO PC
TRIGGERREMOTE
CONTROL
STANDBY/ON
MENUBACK
INPUTOK
Power Cord
(Supplied)
1
2
1  
Connect the power cord supplied with the 
unit power input terminal
2 Connect to the power outlet
● As the amount of electrical energy for this unit is large, please connect it directly into 
the wall...

35
ENGLISH
MEMO 
Preparation    

36
Operation
3
Basic Operation
Basic operation procedures
WARNINGLAMPSTANDBY/ON
Once you have finished the basic setup, the unit can normally be 
used just with the following operations.
1
2
3
Turn on power source
ON
STANDBY/ONLight on (Green)
●  You  can  also  press  the   button  on  the  unit  to  turn 
on the power
. (Reference page: 16)
● The lens cover will be opened. 9070
Remove the lens cover. X730
Choose the projected image
1 Select input mode
● 
You can also select the input mode by pressing...

37
ENGLISH
5Adjust the shift (image position)
BACK Back Operate Select 
Shift 
Lens Control
● 
After  adjusting  the  image  position,  it  may  be  necessary  to 
select 
“Pixel Adjust ”  from  the  Settings  menu  “Installation ”. 
 
(Reference page:  66 to 67
)
● Every  time  the LENS  button  is  pressed,  the  adjustment 
item will be switched among “Focus”, “Zoom” and “Shift”\
.
     
   OK It can also be switched with the button.
)RFXV =RRP 6KLIWLENS 

STAND BY
STAND BY
STAND BY/ON
STAND...

38
Operation
3
Basic Operation (continued)
Frequently used useful functions
    Setting the Screen Size
    Masking the Surrounding A
 rea of an Image
    Te
mporary turning-off of the video
    A
djustment of the keystone correction
The projected image can be set to a most appropriate screen 
size (aspect ratio).
●  When PC signals are input, the  “
A spect(Computer) ”
 setting will be 
available instead.  (Reference page: 60)
■
  Input Image and Projected Image by Different Screen  
Size 
Yo
u can...

39
ENGLISH
●  Depending on the input image, selecting “
4:3 ”
 may result in a 
vertically stretched image, while selecting  “
1
 6:9”
 provides you 
with the most appropriate screen size.
●  When there is 3D signal input, the ratio is fixed to  “
16:9 ”
.
3 Set a Aspect value
ExitMENU BACKBack
Select Operate
Progressive
3D Setting
 HDMI
COMP.Auto
PC　
Picture Position
Mask Input SignalAspect (Video)16:94:3
 Custom 16:9
off
3To end 
MENU
Example:
When the 
“
Aspect ”
 value is 
changed from  “
4
 :3”...

40
Operation
3
MEMO
●  M a s k i n g   i s   a v a i l a b l e   o n l y 
when  high definition  images 
are input.
2Mask the image
②
 Confirm
MENU
Picture Adjust
ResetAdvancedExitMENU BACKBack
Select Operate
Color Temp.
Gamma
Dark/Bright Level
Picture Tone
ContrastBrightness
Color
Tint00
00
Color ProfilePicture ModeNatural
Video
6500KNormal
 1  Display the setting menu
 
2 Select  “
Input Signal ”
  “
Mask ”
①
Select
②ConfirmExitMENU BACKBack
Select Operate
Aspect (Video)
Progressive
3D Setting
 HDMI...