JVC Projector Dla X90rkt Instructions Manual
Here you can view all the pages of manual JVC Projector Dla X90rkt Instructions Manual. The JVC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
21
ENGLISH
Controls and features (continued)
■ Remote Control
How to insert batteries into the remote control
● If the remote control has to be brought closer to the projector to opera\
te, it means that the batteries are
wearing out.
When this happens, replace the batteries. Insert the batteries according\
to the
marks.● Be sure to insert the end first.● If an error occurs when using the remote control, remove the batteries a\
nd wait for 5 minutes. Load the batteries again and operate the...](http://img.usermanuals.tech/thumb/40/91179/w300_jvc-dla-x90rkt-manual_d-20.png "Page 21
21
ENGLISH
Controls and features (continued)
■ Remote Control
How to insert batteries into the remote control
● If the remote control has to be brought closer to the projector to opera\
te, it means that the batteries are
wearing out.
When this happens, replace the batteries. Insert the batteries according\
to the
marks.● Be sure to insert the end first.● If an error occurs when using the remote control, remove the batteries a\
nd wait for 5 minutes. Load the batteries again and operate the...")
21 ENGLISH Controls and features (continued) ■ Remote Control How to insert batteries into the remote control ● If the remote control has to be brought closer to the projector to opera\ te, it means that the batteries are wearing out. When this happens, replace the batteries. Insert the batteries according\ to the marks.● Be sure to insert the end first.● If an error occurs when using the remote control, remove the batteries a\ nd wait for 5 minutes. Load the batteries again and operate the...
Page 22
22 Preparation2 About installation Important points concerning the installation This unit is a precision device. Therefore, please refrain from installation or use in the following locations. Otherwise, it may cause fire or malfunction.• Dust, wet and humid locations.• Sooty or cigarette smoke filled locations.• On top of a carpet or bedding, or other soft surfaces.• Locations with high temperatures - as located in direct sunlight.• Locations with high or low temperatures. Permissible operating...
Page 23
23 ENGLISH Installing the Projector and Screen Set Angle Shift About installation (Continued) While installing, please place this unit and the screen perpendicular to each other. Failing to do so may increase trapezoidal distortion. (Reference page: 36, 52) The angle range which can be set for this unit is ±30°. ■ Left/Right position (*) 0% up/down position (center) ■ Up/Down position (*) 0% left/right position (center) Lens shift correlation chart: ● Malfunctions may occur if the angle is not set...
Page 24
![Page 24
24
Preparation2
About installation (Continued)
Fixation of the projector
Measures to prevent the unit from toppling or dropping should be taken f\
or safety reasons and
accident prevention during emergencies including earthquakes.
When mounting this unit on a pedestal or ceiling, remove the 4 feet on t\
he bottom surface and
use all the 4 screw holes (M5 screws) to mount.
Ceiling■ Bottom Surface
Air inlets
4 locations
Precautions for Mounting
● Special expertise and techniques are required for...](http://img.usermanuals.tech/thumb/40/91179/w300_jvc-dla-x90rkt-manual_d-23.png "Page 24
24
Preparation2
About installation (Continued)
Fixation of the projector
Measures to prevent the unit from toppling or dropping should be taken f\
or safety reasons and
accident prevention during emergencies including earthquakes.
When mounting this unit on a pedestal or ceiling, remove the 4 feet on t\
he bottom surface and
use all the 4 screw holes (M5 screws) to mount.
Ceiling■ Bottom Surface
Air inlets
4 locations
Precautions for Mounting
● Special expertise and techniques are required for...")
24 Preparation2 About installation (Continued) Fixation of the projector Measures to prevent the unit from toppling or dropping should be taken f\ or safety reasons and accident prevention during emergencies including earthquakes. When mounting this unit on a pedestal or ceiling, remove the 4 feet on t\ he bottom surface and use all the 4 screw holes (M5 screws) to mount. Ceiling■ Bottom Surface Air inlets 4 locations Precautions for Mounting ● Special expertise and techniques are required for...
Page 25
![Page 25
25
ENGLISH
About installation (Continued)
Determine the distance from the lens to the screen to achieve your desir\
ed screen size.
This unit uses a 2.0x power zoom lens for projection.
Screen Size and Projection Distance
■ Relationship Between Projection Screen Size and Projection Distance
Projection Screen Size(Height, Width) Aspect Ratio 16:9
Approximate Projection DistanceW(Wide) to T(Tele)
140"(Approx.1.7, 3.1m)Approx.4.23 m to Approx.8.60m
150"(Approx.1.9, 3.3m)Approx.4.53m to...](http://img.usermanuals.tech/thumb/40/91179/w300_jvc-dla-x90rkt-manual_d-24.png "Page 25
25
ENGLISH
About installation (Continued)
Determine the distance from the lens to the screen to achieve your desir\
ed screen size.
This unit uses a 2.0x power zoom lens for projection.
Screen Size and Projection Distance
■ Relationship Between Projection Screen Size and Projection Distance
Projection Screen Size(Height, Width) Aspect Ratio 16:9
Approximate Projection DistanceW(Wide) to T(Tele)
140\"(Approx.1.7, 3.1m)Approx.4.23 m to Approx.8.60m
150\"(Approx.1.9, 3.3m)Approx.4.53m to...")
25 ENGLISH About installation (Continued) Determine the distance from the lens to the screen to achieve your desir\ ed screen size. This unit uses a 2.0x power zoom lens for projection. Screen Size and Projection Distance ■ Relationship Between Projection Screen Size and Projection Distance Projection Screen Size(Height, Width) Aspect Ratio 16:9 Approximate Projection DistanceW(Wide) to T(Tele) 140"(Approx.1.7, 3.1m)Approx.4.23 m to Approx.8.60m 150"(Approx.1.9, 3.3m)Approx.4.53m to...
Page 26
![Page 26
26
Preparation2
No.DesignationResolutionfh[kHz]fv[Hz]dot CLK[MHz]
Total No. of dots[dot]
Total No. of lines[line]
No. of ef fective dots[dot]
No. of effective lines [line]
1VGA 60640 X 48031.50060.00025.200800525640480
2VGA 59.94640 X 48031.46959.94025.175800525640480
3SVGA 60800 X 60037.87960.31740.0001,056628800600
4XGA 601024 X 768 48.36360.00465.0001,3448061,024768
5WXGA 601280 X 76847.76060.00079.9981,6757961,280768
6WXGA +601440 X 90055.91959.999106.4701,9049321,440900
7SXGA 601280 X...](http://img.usermanuals.tech/thumb/40/91179/w300_jvc-dla-x90rkt-manual_d-25.png "Page 26
26
Preparation2
No.DesignationResolutionfh[kHz]fv[Hz]dot CLK[MHz]
Total No. of dots[dot]
Total No. of lines[line]
No. of ef fective dots[dot]
No. of effective lines [line]
1VGA 60640 X 48031.50060.00025.200800525640480
2VGA 59.94640 X 48031.46959.94025.175800525640480
3SVGA 60800 X 60037.87960.31740.0001,056628800600
4XGA 601024 X 768 48.36360.00465.0001,3448061,024768
5WXGA 601280 X 76847.76060.00079.9981,6757961,280768
6WXGA +601440 X 90055.91959.999106.4701,9049321,440900
7SXGA 601280 X...")
26 Preparation2 No.DesignationResolutionfh[kHz]fv[Hz]dot CLK[MHz] Total No. of dots[dot] Total No. of lines[line] No. of ef fective dots[dot] No. of effective lines [line] 1VGA 60640 X 48031.50060.00025.200800525640480 2VGA 59.94640 X 48031.46959.94025.175800525640480 3SVGA 60800 X 60037.87960.31740.0001,056628800600 4XGA 601024 X 768 48.36360.00465.0001,3448061,024768 5WXGA 601280 X 76847.76060.00079.9981,6757961,280768 6WXGA +601440 X 90055.91959.999106.4701,9049321,440900 7SXGA 601280 X...
Page 27
![Page 27
27
ENGLISH
●PC signal (D-sub 3-lines 15 pins) 9070
No.DesignationResolutionfh[kHz]fv[Hz]dot CLK[MHz]
To ta l N o. of dots[dot]
Total No. of lines[line]
No. of ef fective dots[dot]
No. of effective lines [line]
1VGA 60640 X 48031.50060.00025.175800525640480
2VGA 72640 X 48037.90072.00031.500832520640480
3VGA 75640 X 48037.50075.00031.500840500640480
4VGA 85640 X 480 43.30085.00036.000832509640480
5SVGA 56800 X 60035.20056.00036.0001024625800600
6SVGA 60800 X 60037.90060.00040.0001056628800600
7SVGA...](http://img.usermanuals.tech/thumb/40/91179/w300_jvc-dla-x90rkt-manual_d-26.png "Page 27
27
ENGLISH
●PC signal (D-sub 3-lines 15 pins) 9070
No.DesignationResolutionfh[kHz]fv[Hz]dot CLK[MHz]
To ta l N o. of dots[dot]
Total No. of lines[line]
No. of ef fective dots[dot]
No. of effective lines [line]
1VGA 60640 X 48031.50060.00025.175800525640480
2VGA 72640 X 48037.90072.00031.500832520640480
3VGA 75640 X 48037.50075.00031.500840500640480
4VGA 85640 X 480 43.30085.00036.000832509640480
5SVGA 56800 X 60035.20056.00036.0001024625800600
6SVGA 60800 X 60037.90060.00040.0001056628800600
7SVGA...")
27 ENGLISH ●PC signal (D-sub 3-lines 15 pins) 9070 No.DesignationResolutionfh[kHz]fv[Hz]dot CLK[MHz] To ta l N o. of dots[dot] Total No. of lines[line] No. of ef fective dots[dot] No. of effective lines [line] 1VGA 60640 X 48031.50060.00025.175800525640480 2VGA 72640 X 48037.90072.00031.500832520640480 3VGA 75640 X 48037.50075.00031.500840500640480 4VGA 85640 X 480 43.30085.00036.000832509640480 5SVGA 56800 X 60035.20056.00036.0001024625800600 6SVGA 60800 X 60037.90060.00040.0001056628800600 7SVGA...
Page 28
![Page 28
28
Preparation
2
About the connection (Continued)
● Do not turn on the power until connection is complete.
● The connection procedures differ according to the device used. For details, refer to the instruction \
manual of the device to be connected.
● This device is used for image projection. Connect to an audio output dev\
ice such as amplifier and speaker for audio output from the connected device.
● The images may not be displayed depending on the devices and cables to b\
e connected.
For HDMI...](http://img.usermanuals.tech/thumb/40/91179/w300_jvc-dla-x90rkt-manual_d-27.png "Page 28
28
Preparation
2
About the connection (Continued)
● Do not turn on the power until connection is complete.
● The connection procedures differ according to the device used. For details, refer to the instruction \
manual of the device to be connected.
● This device is used for image projection. Connect to an audio output dev\
ice such as amplifier and speaker for audio output from the connected device.
● The images may not be displayed depending on the devices and cables to b\
e connected.
For HDMI...")
28 Preparation 2 About the connection (Continued) ● Do not turn on the power until connection is complete. ● The connection procedures differ according to the device used. For details, refer to the instruction \ manual of the device to be connected. ● This device is used for image projection. Connect to an audio output dev\ ice such as amplifier and speaker for audio output from the connected device. ● The images may not be displayed depending on the devices and cables to b\ e connected. For HDMI...
Page 29
29 ENGLISH About the connection (Continued) ■ Connecting via HDMI Cable ■ Connecting via HDMI-DVI Conversion Cable 1 HDMI 2 RS-232-C 3D C R/PRCB/PB Y SYNCHRO PC TRIGGERREMOTE CONTROL STANDBY/ON MENUBACK INPUT OK 1 HDMI 2 RS-232-C 3D C R/PRCB/PB Y SYNCHRO PC TRIGGERREMOTE CONTROL STANDBY/ON MENUBACK INPUT OK This unit This unit BD/DVD recorder HDMI cable (sold separately) HDMI output terminal Notebook PC ● If noise is produced, take PCs (Notebook PC) away from this...
Page 30
30 Preparation 2 About the connection (Continued) 1 HDMI 2 RS-232-C 3D C R/PRCB/PB Y SYNCHRO PC TRIGGERREMOTE CONTROL STANDBY/ON MENUBACK INPUTOK CBD/DVD player Component video output terminals Y (green) C R/PR (red) C B/PB (blue) ● Set “COMP.” in the setting menu to “Y Pb/Cb Pr/Cr”. (Reference page: 60) This unit To component video input terminals Component video cable (sold separately) ■ Connecting via RGB Video Cable ● Set “ COMP. ” in the setting menu to “ RGB ” ....