JVC Projector Dla Sx21su Instructions Manual

31
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
Image of 4:3
Setting the 
screen size to [4:3]
Setting the 
screen size to [16:9]Image of 16:9
SCREEN
W
S
SCREEN
W
S
16 : 9 4 : 3
Note
(Original image) (Aspect ratio)
Image of 4:3Image of 16:9
(Original image) (Aspect ratio) ●Selecting      or       according to the...

32
Adjustments and Settings Using Menus
The menus displayed on the screen are used to perform adjustment and setup for the projector.
The Menu Structure
The menus of the projector have the following structure.
 Video Input selection
Note
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from the following 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
1 Main: “Image adj.” menu
3...

33
Adjustments and Settings Using Menus
 When PC input is selected
Note
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from the following 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
1 Main: “Image adj.” menu
3 Main: “Set up” menu
6 Main: “Logo” menu
w Main: “Language” menu
e Main: “Information” menu
9 Main: “Options” menu (“Page 1”)p “Color profile” menu
q Main: “Options”...

34
Adjustments and Settings Using Menus
 When no image signal is inputted
Note
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from the following 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
1 Main: “Set up” menu
9 Main: “Options” menu (”Page 1”)
w Main: “Language” menu
e Main: “Information” menu
qMain: “Options” menu (“Page 2”)
A
GBR
ENTERENTER
1:1PanelAspect
LowStdHighSTBP 12...

35
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
PRESET
MENU
V-KEYSTONEPC LAMP
H-KEYSTONE VOL.
EXIT
ENTER
HIDE
VIDEO
TEMPSTAND BYOPERATE
Menu 
operation 
button
Menu 
operation 
button
MENUMENU
ENTER
EXIT
ENTER
ENTER
Main unit
ENTER
Remote control unit
Adjustments and Settings Using Menus
The Menu Operation Buttons
The menu is operated with the following buttons on the projector/remote
control:
Button
Main unit
Remote control unit...

36
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
MENU
V-KEYSTONEPC LAMP
H-KEYSTONE VOL.MENU
EXIT
ENTER
VIDEO
TEMPSTAND BYOPERATE
2, 4 3, 5 6 1
5
1
6
2, 4 3, 5
5
A
12
12
1 12
12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
InformationContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     
A
12
12
1 12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
InformationContrast     
Brightness...

37
Adjustment and Setting Using Menus
3“Set up” menu
To set the basic setting for Tracking and Positioning of the pic-
ture image, you can adjust the items in the “Set up” menu as
below.
•The adjustment items differ when selecting Video input and
PC input.
When Video input is selected
Adjustment item (press
/)Adjustment content (press/)
“Position” The position of the image and the menu
can be adjusted.
[ Press the ENTER button to enter the
     “Position” menu 4.
“Deinterlace” This is set when viewing...

38
“Clamp” This can be used if the screen of the PC/
workstation is unstable in that it dims and
brightens.
Set the position of the clamp pulse to
Back porch (“BP”) or Sync tip (“SP”).
Normally, “BP” is used.
Setting value: “ST”, “BP” [“BP”]
“Sync Level” Although the inputted image signal is
adjusted so that synchronization occurs
automatically, this changes by changing
the “Sync level” setting.
Setting can be made by selecting “Low”
(weaker), “Std” (factory set) or “High”
(stronger).
Setting value:...

39
8 “Capture start”
The status of capture is displayed in bold.
“Capt. in prog. (Approx. 2min)”
The image is being read into the projec-
tor. During this time interval, the projec-
tor will not respond to any command sig-
nal inputted by the user.
“Signal can not be captured”
Clear the message with the EXIT button
and input appropriate signals.
“Reduce capt. size”
Clear the message with the EXIT button
and decrease the signal size.
❈Depending on the image content, there
will be cases where certain...

40
e “Information” menu
When video input is selected
Adjustment item (press
/)Adjustment content (press/)
“Input” Displays the image input (VIDEO, Y/C,PC2) when projecting.
“Switcher” Displays the selected switcher matching
the specification of this projector.
0: not being used.
1-10: switcher number.
❈ For details, please check with your au
    thorized dealer.
“Source” Displays the type of video signal of the
image projected.
“Lamp time” Displays the accumulated used hours of
the light-source lamp....