JVC Projector Dla Sx21su Instructions Manual

							31
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
Image of 4:3
Setting the 
screen size to [4:3]
Setting the 
screen size to [16:9]Image of 16:9
SCREEN
W
S
SCREEN
W
S
16 : 9 4 : 3
Note
(Original image) (Aspect ratio)
Image of 4:3Image of 16:9
(Original image) (Aspect ratio) ●Selecting      or       according to the input signal will change the projected 
image as shown in the following tables.
●Screen size can also be chosen from the “Options menu”. (☞ page 37)
12
WS
Screen Pos.
Basic Operations
  Using the Quick Alignment function
The quick alignment function automatically adjusts (sets) the screen set-
tings of the image input from the PC 1 or PC 2 input terminal.
●This can only be performed with the remote control.
Press the QUICK ALIGN (Quick Alignment ) button.
During automatic alignment, “QUICK ALIGN...” appears on the screen,
and disappears after alignment is complete.
Notes
•The “Quick Alignment” function only works when computer
signals are input into the input terminal of either PC1 or PC2.
It does not work when the signal is input from the VIDEO IN
terminal(VIDEO or Y/C input terminal).
•The Quick Alignment function.
   The adjustments of “Horiz. disp. pos.” and “Vert. disp. pos.”, “Phase”,
“Tracking”, etc. are automatically carried out.
•Using the Quick Alignment function for quick adjustment.
   Please perform this with a bright still-picture. This function may not
work correctly on a dark picture or a motion-picture.
If adjustment with the Quick Alignment function is not satisfactory,
adjust “Horiz. disp. pos.” and “Vert. disp. pos.”, “Phase” and “Track-
ing” individually.
  Selecting the Screen Size
Press the SCREEN button to select the wide screen size (16:9) or the
standard screen size (4:3).

 Screen size display
Displays when „ is selected. Move the image
position with the cursor button  or .
1Adjusted value
range:  -30 ~ 0 ~30
2Level displayed
level displayed is based on the adjustment value.•When the screen mode is set to 16:9, UXGA signals cannot be pro-
jected. (☞ page 39)
1
212
Screen Pos. 
						

							32
Adjustments and Settings Using Menus
The menus displayed on the screen are used to perform adjustment and setup for the projector.
The Menu Structure
The menus of the projector have the following structure.
 Video Input selection
Note
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from the following 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
1 Main: “Image adj.” menu
3 Main: “Set up” menu
6 Main: “Logo” menu
w Main: “Language” menu
e Main: “Information” menu
9 Main: “Options” menu (“Page 1”)p “Color profile” menu
q Main: “Options” menu (“Page 2”)
4 “Position” menu
2 “Color temp.” menu
5 “Decoder” menu
7 “Capture menu”8 “Capture start”
A
12
12
1 12
12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
Information
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
ENTERENTER
ENTERENTER
Auto OFF1080i 1035i4:3
1216:9
Decoder
SECAMPA L NTSC4.43NTSC AUTO(NTSC)
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Image adj.
Set up
Logo
Options
Language
Information
A
GBRENTERENTER
BlueBlack
OFFONImage adj.
Set up
Logo
Options
Language
Information
AENTERENTER
(-) (+)12(-) (+)12
GBR
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
12
15sec ON
OFF ON
OFF ON
4:3 16:95sec OFF
ENTER
ENTER
sRGB
MacRGB
Color profile
Adobe
EBU
EXITEXIT
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Image adj.
Set up
Logo
Options
Language
Information
A
1Source 
1234 hLamp time
CH.12SwitcherPC1Input 
Image adj.
Set up
Logo
Options
Language
Information
A
0 GREEN
0 BLUE0 REDGBR
Color temp.6500STD User
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
ENTER
Auto OFF1080i 1035i4:3 16:9
ENTER
OFF ON
OFFONOFFON9600
RGB YPbPr
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
192001280128014001400ENTER
Sleep time[min]     
Menu color     
PC2(BNC)     
DIST     
SCART     
RS-232C[bps]     
SXGA     
Page 1     601530OFFOFF
Main menu Submenu
Color profile     
Menu display     
Line display     
Flip H     
Flip V     
Screen     
Screen pos.     
Page 2      Contrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     
Position     
Deinterlace     
HDTV     
Aspect ratio     
Decoder     
Phase     
Logo disp.     
Logo pos.     
Back color     
Logo delete     
Capture menu
Capture menu     
Menu pos.     
Horiz.move     
Vert.move     
Horiz.size     
Vert.size     
Capture start     Position     
Deinterlace     
HDTV     
Aspect ratio     
Decoder     
Phase     Capt.in prog.(approx. 2min)        
Signal can not be captured        
Reduce capt.size        
English
Deutsch
Espãnol
Italiano
Français
Portugûes
A
Image adj.
Set up
Logo
Options
Language
Information 
						

							33
Adjustments and Settings Using Menus
 When PC input is selected
Note
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from the following 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
1 Main: “Image adj.” menu
3 Main: “Set up” menu
6 Main: “Logo” menu
w Main: “Language” menu
e Main: “Information” menu
9 Main: “Options” menu (“Page 1”)p “Color profile” menu
q Main: “Options” menu (“Page 2”)
4 “Position” menu
2 “Color temp.” menu
7 “Capture menu”8 “Capture start”
A
GBR
EXITEXIT
12
12
A
GBR
ENTER
1:1PanelAspect
LowStdHighSTBP 12 123
A1234 hCH.12
1 PC1
GBR
Main menu Submenu
A
12
12
1 12
12
ENTERENTERENTERENTER
Image adj.
Set up
Logo
Options
Language
Information
Image adj.
Set up
Logo
Options
Language
InformationImage adj.
Set up
Logo
Options
Language
Information
Image adj.
Set up
Logo
Options
Language
Information
A
123 GREEN
123 BLUE123 REDGBR
Color temp.6500STD UserContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     
Position     
Tracking     
Phase     
Resize     
Clamp     
Sync level
Position     
Menu pos.     
Horiz.disp.pos.     Vert.disp.pos.     
Horiz.DIST pos.     
Image adj.
Set up
Logo
Options
Language
Information
A
GBRENTERENTERENTERENTER
BlueBlack
OFFONLogo disp.     
Logo pos.     
Back color     
Logo delete     
Capture menuImage adj.
Set up
Logo
Options
Language
Information
AENTERENTER
(-) (+)12(-) (+)12
GBR
Capture menu     
Menu pos.     
Horiz.move     
Vert.move     
Horiz.size     
Vert.size     
Capture start     
Capt.in prog.(approx. 2min)        
Signal can not be captured        
Reduce capt.size        
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
12
15secON
OFF ON
OFF ON
4:3 16:95sec OFF
ENTERENTER
ENTERENTERColor profile     
Menu display     
Line display     
Flip H     
Flip V     
Screen     
Screen pos.     
Page 2     
sRGB
MacRGB
Color profile
Adobe
EBU
EXITEXIT
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
OFF ON
OFFONOFFON9600
RGB YPbPr
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
192001280128014001400ENTERENTER
Sleep time[min]     
Menu color     
PC2(BNC)     
DIST     
SCART     
RS-232C[bps]     
SXGA     
Page 1     601530OFFOFF
English
Deutsch
Espãnol
Italiano
Français
Portugûes
A
Image adj.
Set up
Logo
Options
Language
Information
Image adj.
Set up
Logo
Options
Language
InformationInput     
Switcher     
Source     
Lamp time      
						

							34
Adjustments and Settings Using Menus
 When no image signal is inputted
Note
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from the following 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
1 Main: “Set up” menu
9 Main: “Options” menu (”Page 1”)
w Main: “Language” menu
e Main: “Information” menu
qMain: “Options” menu (“Page 2”)
A
GBR
ENTERENTER
1:1PanelAspect
LowStdHighSTBP 12 123
Image adj.
Set up
Logo
Options
Language
InformationPosition     
Tracking     
Phase     
Resize     
Clamp     
Sync level
Main menuSubmenu
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
12
15secON
OFF ON
OFF ON
4:3 16:95sec OFF
ENTERENTER
ENTERENTERColor profile     
Menu display     
Line display     
Flip H     
Flip V     
Screen     
Screen pos.     
Page 2     OFF ON
OFFONOFFON9600
RGB YPbPr
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
19200128014001400ENTERENTER
Sleep time[min]     
Menu color     
PC2(BNC)     
DIST     
SCART     
RS-232C[bps]     
SXGA     
Page 1     601530OFF
A1234 hCH.12
1 PC1
GBR
English
Deutsch
Espãnol
Italiano
Français
Portugûes
A
Image adj.
Set up
Logo
Options
Language
Information
Image adj.
Set up
Logo
Options
Language
InformationInput     
Switcher     
Source     
Lamp time      
						

							35
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
PRESET
MENU
V-KEYSTONEPC LAMP
H-KEYSTONE VOL.
EXIT
ENTER
HIDE
VIDEO
TEMPSTAND BYOPERATE
Menu 
operation 
button
Menu 
operation 
button
MENUMENU
ENTER
EXIT
ENTER
ENTER
Main unit
ENTER
Remote control unit
Adjustments and Settings Using Menus
The Menu Operation Buttons
The menu is operated with the following buttons on the projector/remote
control:
Button
Main unit
Remote control unit
Function
EXIT
Displays the main menu on the
screen.
•When the main menu is displayed,
press to exit the menu mode.
Select an item while the main menu
(hierachy1) is displayed; the
submenu (hierachy 2) corresponding
to the item selected will be displayed
on the screen.
Press to shift to the “Set up” screen
(hierachy3) of the selected item
against which “ENTER” is displayed.
Press to return to the previous menu.
While the main menu is displayed,
press to exit the menu mode.
While the main menu and sub-
menu (“Image adj.”, “Set up”, “Op-
tions”, “Logo”) is displayed

/:Selects an adjustment item
in the menu.
/:Sets the value of the item
selected.
The adjusted set value is
immediately reflected on
the image.
While the “Language”, “Decoder”
or “Color profile” submenu is dis-
played

/: Selects an item in the menu./: No effect. 
						

							36
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
MENU
V-KEYSTONEPC LAMP
H-KEYSTONE VOL.MENU
EXIT
ENTER
VIDEO
TEMPSTAND BYOPERATE
2, 4 3, 5 6 1
5
1
6
2, 4 3, 5
5
A
12
12
1 12
12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
InformationContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     
A
12
12
1 12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
InformationContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     12
A
12
12
1 12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
InformationContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     12
The Procedure for Menu Operation
1.Press the MENU button
The main menu is displayed on the screen.
4.Press the CURSOR buttons (
/) to select an adjust-
ment item.
Item names in the submenu displayed in pale cannot be selected.
5.Press the CURSOR buttons (/) to change the setting
value.
6.To EXIT after the adjustment, press the EXIT button.
Each time you press the button, the menu returns to the previous
one.
7.Repeat procedures 2 to 6 to set other items.
After all adjustments are done,
Press the MENU button.
The menu will disappear from the screen.
The menu item that has been se-
lected is displayed.
The icon of the selected menu item
will be highlighted.
The submenu is displayed.
2.Press the CURSOR buttons (
/) to select a submenu.
•The “Image adj.”, “Set up”, “Logo”, “Options” and “Language”
submenus are displayed.
•When “Information” is chosen, the image input or PC input infor-
mation (whichever is currently selected) is displayed on the right
of the menu.
•When “Language” is selected, you can set the language. ➔
Proceed to Procedure 6.
3.Press ENTER button or the right CURSOR button ().
•The submenu is displayed on the screen.
•The submenu items differ when Video input or PC input is se-
lected, or when there is no image signal inputted. For details, please
see ‘The Menu Configuration’ on the next page.
E.g. Main menu when video input is
selected: “Image adj.”.
Alternatively, press ENTER.
•When the item in the image adjustment menu against which
“ENTER” is indicated is selected, either it will shift to the set
up screen or the item command will be executed.
“Image adj.” menu when video in-
put is selected.“Image adj.” menu when PC input is
selected.
Adjustments and Settings Using Menus 
						

							37
Adjustment and Setting Using Menus
3“Set up” menu
To set the basic setting for Tracking and Positioning of the pic-
ture image, you can adjust the items in the “Set up” menu as
below.
•The adjustment items differ when selecting Video input and
PC input.
When Video input is selected
Adjustment item (press
/)Adjustment content (press/)
“Position” The position of the image and the menu
can be adjusted.
[ Press the ENTER button to enter the
     “Position” menu 4.
“Deinterlace” This is set when viewing movies.
“AUTO”: Normally, the projector is set to
              AUTO.
“OFF”  :This is set when not viewing mov
             ies.
“HDTV” In order to display the signals of “HDTV”
by the exact aspect ratio of 16:9, the right
numerical value has to be set.
“1080i” : Normally, set to 1080i.
“1035i” : Set when high vision signals are
used.
“SF” :Used for segment frame signals
“Aspect ratio” Select the vertical-to-horizontal ratio of
the image projected.
Set it to 4:3 for the normal television im-
age input and 16:9 for Hi-Vision input.
When the “Screen” mode is set to 16:9,
UXGA signals cannot be projected.
Set value: 4:3, 16:9 [4:3]
“Decoder” Sets the “Decoder”.
[ Press the ENTER button to enter the
      “Decoder” menu 5.
“Phase” Adjusts flickering or dim image.
(setting is normally not required)
When the “Screen” mode is set to 16:9,
UXGA signals can not be projected.
Set value : 0 ~ 31 [Varies with signals]
When PC input is selected
Adjustment item (press
/)Adjustment content (press/)
“Position”Adjusts the position of the image and
menu display.
[ Press ENTER to go to the “Position”
      menu 4.
“Tracking” Adjusts lateral size and display area of
image. (Setting is normally not required.)
[varies with signal]
“Phase” Adjusts flickering or dim image.
(adjustment is normally not required.)
Set value : 0 ~ 40 [Varies with signals]
“Resize”When the image resolution is smaller than
that of the projector’s D-ILA element, the
projected image will be enlarged to almost
the full screen size.
Set Value : *“1:1”, “Panel”, “Aspect”
[“Aspect”]
1“Image adj.” menu
Image adjustment.
You can adjust the following items on the “image adj.” menu.
•The items displayed differ when Video input or PC input is
selected.
•There is no display when no image signal is inputted.
Adjustment item (press
/)Adjustment content (press/)
“Contrast” Adjusts the contrast of the picture image.Set value: -30~30 [0]
“Brightness” Adjusts the brightness of the picture im-
age. Set value: -30~30 [0]
“Color” Adjusts the color density of the picture
image. Set value: -30~30 [0]
“Tint” Adjusts the tint of the picture image. Set
value: -30~30 [0]
“Sharpness”* Adjusts the outline of the picture image.
Set value: -3~3 [0]
“Color temp.”Adjust the Color temperature of the
screen.
[ Press ENTER button to go into the
      Color temperature setting menu.
“Reset”Resets all items in the “Image adj.”
submenu to the pre-set values( ie values
set upon purchase).
[ Press ENTER button to reset.
*In the “Set up” menu 3, if the “Resize” function in the PC submenu is
set to “1:1”, the image quality will not change even if the value is
changed. (No adjustment)
2 “Color temp.” menu
To adjust the “Color temp.” of the projected image, press the
(
/) CURSOR buttons and choose the setting. Next press
the (/) CURSOR buttons to set the “Color temp.”. If “6500”
is set, the image will turn out reddish.
Set value: “6500”, “Normal”, “User” [“User”]
“RED” : –255 ~ 0 [0]
“GREEN” : –255 ~ 0 [0]
“BLUE” : –255 ~ 0 [0]
The Menu Configuration
The value in [  ] of each item is the manufacturer set value.
•Press the ENTER, EXIT or the right CURSOR button () to
operate the MENU while it is displayed.
•The submenu corresponding to the item selected is displayed
on the right-hand side of the main menu.
•The items indicated differ when Video input and PC input is
selected or when there is no image signal inputted.
•When “Information” has been selected, the present selected
image input information, etc., appears on the right side of the
menu.
There is no submenu for this “Information” menu. (For details,
please See ‘Main: “Information” menu’ on page 40.)
When Video input is selectedWhen PC input is selected 
						

							38
“Clamp” This can be used if the screen of the PC/
workstation is unstable in that it dims and
brightens.
Set the position of the clamp pulse to
Back porch (“BP”) or Sync tip (“SP”).
Normally, “BP” is used.
Setting value: “ST”, “BP” [“BP”]
“Sync Level” Although the inputted image signal is
adjusted so that synchronization occurs
automatically, this changes by changing
the “Sync level” setting.
Setting can be made by selecting “Low”
(weaker), “Std” (factory set) or “High”
(stronger).
Setting value: “Low”, “Std”, “High” [“Std”]
* “1.1” : The image is displayed at the inputted resolution.
“Panel
”: The picture image projected is virtually enlarged to
  the full screen size if the inputted resolution is smaller
                         than (1400 pixels x 1050 pixels).
“Aspect
”: While maintaining the original aspect ratio, the video
  image projected is virtually enlarged until either the
  horizontal or vertical side reaches the full size (1400
  pixels x 1050 pixels).
When there is no image signal inputted
Adjustment item (press
/)Adjustment content (press/)
“Sync level” Although the inputted image signal is
adjusted so that synchronization occurs
automatically, this changes by changing
this setup.
Setting can be made by selecting “Low”
(weaker), “Std” (factory set) or “High”
(stronger).
Setting value: “Low”, “Std”, “High” [“Std”]
4 “Position” menu
Adjusts the menu display position. Press the (
/) CURSORS
to set the horizontal/vertical position of the menu display.
Set Value:
“Menu pos.”:
“Horiz. disp. pos.” : Varies with signals.
“Vert. disp. pos.” : Varies with signals.
“Horiz. DIST pos.” : - 8 ~ + 7 [0]
5 “Decoder” menu
Press the (
/) CURSOR buttons to choose the “Decoder” of
the image signals. Normally, “Auto” is selected. When “Auto” does
not function well, select the appropriate decoder accordingly.
Set Value: “AUTO”, “NTSC”, “NTSC4.43”, “PAL”, “SECAM”
 [“AUTO”]
6 “Logo” menu
Adjustment item (press
/)Adjustment content (press/)
“Logo  disp.” Sets whether to indicate the user set logo
(captured image: “Logo disp.”) when the
projector starts up.
[“ON”]
“Logo pos.”Sets the position of the user set logo (cap-
tured image: “Logo disp.”) when the pro-
jector starts-up. Re-setting can be per-
formed only when the logo has been
eliminated.
Set value:
“Logo pos.”:
¥¥¥ ¥ ¥ ¥ ¥ ¥
“Back color” Selects the background color of the user
set picture (captured image: “Logo disp.”).
[“Black”]
Re- setting can be performed only when
the logo has been eliminated.
“Logo delete”Deletes the user set logo (captured
image: “Logo disp.”). Deletion takes a few
seconds.
[ Press the ENTER button to delete.
“Capture menu” You can project the picture from the video
player or PC and capture the picture you
like.
The captured picture can be displayed as
a logo display when the projector starts
up.
[ Press the ENTER button to go into
      the “Capture menu” screen.
7 “Capture menu”
Adjustment item (press
/)Adjustment content (press/)
“Menu pos.” Adjusts the display position of the cap-
ture menu.
Set value:
“Menu pos.”:
¥¥¥ ¥ ¥ ¥ ¥ ¥
“Horiz. move” The position of the picture that you want
to capture can be moved left/right with the
CURSOR buttons ( / ).
“Vert. move” The position of the picture that you want
to capture can be moved up/down with
the CURSOR buttons (
 /).
“Horiz. size” The width of the picture that you want to
capture can be set by the CURSOR but-
tons ( / ).
“Vert. size” The height of the picture that you want to
capture can be set by the CURSOR but-
tons  (
 /).
“Capture start” After setting all the items of the capture
menu, image capture starts.
❈Note that images already inputted will
 be deleted.
[ Press the ENTER button to start.
Adjustments and Settings Using Menus
[  ]
[  ]
[  ]
¥¥¥ ¥ ¥ ¥ ¥ ¥ 
						

							39
8 “Capture start”
The status of capture is displayed in bold.
“Capt. in prog. (Approx. 2min)”
The image is being read into the projec-
tor. During this time interval, the projec-
tor will not respond to any command sig-
nal inputted by the user.
“Signal can not be captured”
Clear the message with the EXIT button
and input appropriate signals.
“Reduce capt. size”
Clear the message with the EXIT button
and decrease the signal size.
❈Depending on the image content, there
will be cases where certain signals can-
not be captured while others of the
same size can be.
9 “Options” menu (q)
The items of the “Options” menu shown below can be adjusted.
•The “Options” menu consists of two pages (“Page 1” and “Page
2”).
“Page 1”
Adjustment item (press
/)Adjustment content (press/)
“Color profile” Sets the color table.
[ Press the ENTER button to go into the
       color profile menu p.
“Menu display” Sets whether to clear the menu display
automatically after 15 seconds.
Setting value: “15sec”, “ON” [“15sec”]
“Line display” Sets whether to show the line display for
about 5 seconds.
Setting value: “5sec”, “OFF” [“5sec”]
“Flip H” Reverse image left to right.
Setting value: “ON”, “OFF” [“OFF”]
“Flip V” Inverse image upside down.
Setting value: “ON”, “OFF” [“OFF”]
“Screen” Sets the projected screen size.
Setting value: 4:3, 16:9 [4:3]
“Screen pos.”Sets the display position when the
“Screen” is set to [16:9].
Setting value: -30~30 [0]
“Page 2” Displays “Page 2” of the “Option” menu.
[ press ENTER to go the “Option” menu
     (“Page 2”) screen q.
p “Color profile” menu
To choose the color table of the image signals, press the (
 / )
CURSOR buttons. When using “Color profile”, set the “Color
temp.” to “6500”.
•No display in the absence of image signal input.
Set Value: “------”, “sRGB”, “MacRGB”, “Adobe”, “EBU”
[“------”]
Adjustments and Settings Using Menus
q “Page 2”
Adjustment item (press
/)Adjustment content (press/)
“Sleep time [min]” Sets the length of sleep time which, when
lapsed, automatically brings the projec-
tor into the stand-by state if no signal is
inputted.
Setting value: 15,30,60,“OFF” [“OFF”]
“Menu color”When “ON”, menu becomes transparent and
the background can be seen through it.
Setting value: “OFF”, “ON” [“OFF”]
“PC2 (BNC)” Sets whether to use the BNC connector
on the back of the projector as an “RGB”
signal input terminal or as a “YP
BPR”
(color-difference) signal input terminal.
Please reset it based on the connected
apparatus.
❈ The input will be “RGB” irrespective of
    the PC signal setting.
Setting value: “RGB”, “YPBPR”[“RGB”]
“DIST”Image of high resolution can be achieved.
Set as required.
This is turned “ON” when the OPERATE
button is pressed.
Setting value: “OFF”, “ON” [“ON”]
“SCART” Connects to a Europe-adapted SCART
plug and turns it “ON” during component
input.
Connect the Image Signal cable to the
RGB terminal of the PC2 input terminal
and the Sync Signal cable to the VIDEO
IN terminal.
Setting value: “OFF”, “ON” [“OFF”]
“RS-232C [bps]”Sets the communication speed (signal
transmission speed) when communicat-
ing with a computer by using the RS-232C
terminal. Please set the baud rate for
transmission.
Setting value: 9600,19200 [19200]
“SXGA” Setting value: 1280,1400 [1280]
“Page 1” Display “Page 1” of “Options” menu.
[ Press the ENTER button to go to “Op-
tions” menu (“Page 1”) screen9.
w “Language” menu
Select the language in this language menu with the CURSOR
buttons (
 / ).
Setting value:“English”, “
”(Japanese), “Deutsch” (Ger-
man), “Espanol” (Spanish), “Italiano” (Italian),
“Francais” (French), “Portugues” (Portuguese)
and “
” (Korean).
[“English”]
❈Some words in the menu and proper nouns such as “VIDEO”,
“NTSC”, “QUICK ALIGN...” are shown only in English. 
						

							40
e “Information” menu
When video input is selected
Adjustment item (press
/)Adjustment content (press/)
“Input” Displays the image input (VIDEO, Y/C,PC2) when projecting.
“Switcher” Displays the selected switcher matching
the specification of this projector.
0: not being used.
1-10: switcher number.
❈ For details, please check with your au
    thorized dealer.
“Source” Displays the type of video signal of the
image projected.
“Lamp time” Displays the accumulated used hours of
the light-source lamp.
When PC input is selected
Adjustment item (press
/)Adjustment content (press/)
“Input” Displays the computer input (PC1, PC2,
PC3) when projecting.
“Switcher” Displays the selected switcher number
matching the specification of this projec-
tor.
0: not being used.
1-10: switcher number.
❈ For details, please check with your au
    thorized dealer.
“Resolution”Displays the resolution of the inputted sig-
nal. (Horizontal x vertical)
❈ Some inputted signals cannot be dis
  played correctly.
“Frequency H” Displays the horizontal frequency of the
inputted signal.
“Frequency V” Displays the vertical frequency of the in-
putted signal.
“Lamp time” Displays the accumulated used hours of
the light-source lamp.
When no image signal is inputted
Adjustment item (press
/)Adjustment content (press/)
“Input” D i s p l ay s  t h e  s e l e c t e d  i m a g e  i n p u t
(VIDEO, Y/C, PC1, PC2, PC3) when pro-
jecting.
“Switcher” Displays the selected switcher number
matching the specification of this projec-
tor.
0: not being used
1-10 : switcher number.
❈ For details, please check with your au
    thorized dealer.
“Lamp time” Displays the accumulated used hours of
the light-source lamp.
Adjustments and Settings Using Menus