JVC Projector DLA-SH7NL User Manual

31
5 Adjust the focus
You can adjust the focus using the AFocus B item of the 
Lens  menu.
\bTo move the focus point closer:
Press the  A+ B (Near) end of  AFocus B
\bTo move the focus point away:
Press the  A B (Far) end of  AFocus B
NOTE:                                                                               
●The focus changes  each time you click on the inner 
buttons ( / ). (Fine control)
The outer buttons ( / ) c hange the focus when they 
are depressed. (Coarse control)
6 Select a screen...

32
Operation and Settings
1 Enter the IP address assigned in the address 
field of the Internet Explorer, and click  AGo B 
( A Page 28)
●Example: When IP address assigned is 
A192.168.0.2 B, enter                                 
A http://192.168.0.2 B. 
NOTE:                                                                               
● When  ALAN Setting B in Internet Expl orer is set to 
A Use a proxy server for your LAN B it may not be 
possible to designate addresses directly. Change the 
proxy...

33
After installation and connection are complete, perform the necessary adjustment and setting.
Operate the menus using the computer’s browser  to make adjustments and configure settings.
User Settings Menu Structure
User Settings Menu
Page Menu Name Page Display Item Simplified Description of Item
(1)  Main Power
Warning Status
Lamp Mode
Lamp Information
Signal Status
Temperature
Hide Power ON/OFF operation
Error code display
Illumination mode setting
Lamp information display
Input signal information...

34
Operation and Settings
(1) Main Menu
This menu displays the ON/OFF status of the power supply and informa tion on signals input to the projector.
NOTE:                                                                                                                                                                                       
●When the power of this unit is off (main power is on), the  AMain B,  AImage B,  ASetting B,  AConvergence B,  ALens B and...

35
\b indicates the factory default.
Item Setting Value Description
Power ON
OFFFor turning on/off th
e lamp selected in ALamp Mode B.
ON : Turns on the lamp.
OFF : Turns off the lamp.
NOTE:                                                                                                      
● The following operating modes of the projector are displayed to the 
right of the OFF button.
STANDBY : Standby (OFF)
PROJECTION : Lamp Illuminated (ON)
FAN ENABLE : FAN Enable (OFF ON)
LAMP ENABLE : LAMP Enable...

36
Operation and Settings
(1) Main Menu (Cont’d)
\b indicates the factory default.
User Settings Menu 
(Cont’d)
Item Setting Value Description
Signal Status DVI
Rate(Hz)
Pixel H
Pixel V
Link ^
^
^
^
^Displays information on the input signals.
DVI : Displays the DVI input terminal number.
Rate(Hz) : Displays the vertical frequency.
Pixel H : Displays the horizontal resolution.
Pixel V : Displays the  vertical resolution.
Link : Displays the link status of the DVI terminal.
NOTE:...

37
(2) Image Menu
This menu is used for adjusting the picture quality. 
\b  indicates the factory default.
Brightness
Setting
Convergence
Lens
Option
Logout
host PJ-1
user: root
Red
0-30 +30
Green0-30 +30
Blue0-30 +30
Contrast
GammaHide
Red
0-30 +30
Green0-30 +30
Blue
0-30 +30
Main
Image
ONOFFBC
A
Item Setting Value Description
Brightness Red
Green
Blue -30 to +30
(Default Value: 0)
-30 to +30
(Default Value: 0)
-30 to +30
(Default Value: 0)For adjusting the brightness of t
he red, green, and blue...

38
Operation and Settings
(3) Setting Menu
This menu is used for specifying the input level of the terminal and the display mode.
\b indicates the factory default.
User Settings Menu 
(Cont’d)
Setting
Convergence
Lens
Option
Logout
host PJ-1
user: root
Input LevelMain
Image0-255(PC)
Display Mode
16-235
11
3
3
12
4
Single Double Cross
Item Setting Value Description
Input Level Q 0-255(PC)
16-235 For specifying the input level of the video signals.
0-255(PC) : Set to this value under normal circumstances....

39
(4) Convergence Menu
This menu is used for correcting color shifts in the optical system. 
\b  indicates the factory default.
Red
Setting
Convergence
Lens
Option
Logout
host PJ-1
user: root
LR U
D
Main
Image
Blue
LRU
D
Test Pattern
SETOFF
OFF
Item Setting Value Description
Red ^For adjusting the horizontal/vertical position of red and blue colors on 
the image.
NOTE:                                                                                                       
●The green color value is fixed....

40
Operation and Settings
(5) Lens Menu
This menu is used for adjusting the projection lens. 
User Settings Menu 
(Cont’d)
Zoom
Setting
Convergence
Lens
Option
Logout
host PJ-1
user: root
Main
ImagewT
Focus
+
_
Shift
LR U
D
Test Pattern
SETOFF
OFF
Item Setting Value Description
Zoom ^For adjusting the zoom ratio (screen size).
NOTE:                                                                                                      
●The zoom position changes each ti me the inner button is clicked. 
The...