JVC Projector Dla Hd1 Instructions Manual

21
Getting StartedPreparationBasic Operation Settings Troubleshooting Others
ENGLISH
zSet ACOMPB in the setting menu to ASCARTB. (pP31 - P)
zSet ACOMPB in the setting menu to ARGBB. (pP31 - P)
zFor information on compatible input signals, see ASpecificationsB. (pP52)
Connecting via SCART-RCA Cable
Connecting via RGB Video Cable
SCART-RCA cable
(sold separately)DVD player for European market
To RGB video and sync signal input terminals This unit
SCART terminal
RGB video output terminals
RGB video cable...

2Preparation
22
Installing the Projector and Screen
Install this unit and the screen. Place this unit and the screen perpendicular to each other.
Failing to do so may give rise to trapezoidal distortion of the projected image.
AInstall the projector and screen
„Left/Right position
*0 % up/down position (center)
„Up/Down position
*0 % left/right position (center)Approximately 34 % (maximum) of the projected image
(Turn the dial to the left for maximum)Approximately 34 % (maximum) of the projected image...

23
Getting StartedPreparationBasic Operation Settings Troubleshooting Others
ENGLISH
BAdjust such that the projected image is in the center of the screen
zIt may be necessary to set APixel AdjustB in the setting menu after adjusting the image position. (pP30 - J)
Determine the distance from the lens to the screen to achieve your desired screen size.
This unit uses a 2.0x manual zoom lens for projection.
„Relationship Between Projection Screen Size and Projection Distance
z
The projection distances in the...

24
3Basic Operation
Projecting Image
Preparation
zRemove the lens cap.
AInsert the power plug to the power outlet
BTurn on the power
CProject the image
aSelect input mode
bPlay back the selected device
DAdjust the position of the projection screen
This section describes the basic operations to project input images on the screen.
zYou can also press the [STANDBY/ON] button on the unit to turn on the 
power. (pP15)
zYou can also select the input mode by pressing the [INPUT] button on 
the unit. (pP15)
zSee...

25
PreparationBasic OperationSettings Troubleshooting Others Getting Started
ENGLISH
EAdjust the image size (zoom)
FAdjust the focus
GTurn off the power
Hold and rotate the tab
zThe power cannot be turned off within approximately 90 seconds after it 
has been turned on. Start operation only after 90 seconds time.
zYou can also press the [STANDBY/ON] button on the unit to turn off the 
power. (pP15)
zPut back the lens cap after use to prevent the lens from dirt.
zPull out the power plug when the unit will...

26
3Basic Operation
Convenient Features during Projection
The projected image can be set to a most appropriate screen size (aspect 
ratio). 
z
The screen size can also be set from AAspectB of the setting menu. (pP32 - R)
zWhen high definition images are input, the screen size is fixed at A16:9B.
„Input Image and Projected Image by Different Screen Size Settings
z
Depending on the input image, selecting A4:3B may result in a vertically stretched 
image while selecting A16:9B provides you with the most...

27
PreparationBasic OperationSettings Troubleshooting Others Getting Started
ENGLISH
BMask the image
aDisplay the setting menu
bSelect ASetupB g AMaskB
cSet a mask value
CTo end
zMasking is available only when high 
definition images are input.
MEMO
Setup
ImageVideo Install. Func. Info.
Image Adjust
Color Temp.
Gamma
Offset
Pixel Adjust
Image Profile
Profile Memory
Picture Position
HDMI Input Level
Mask
Setup Image Video Install. Func. Info.
2.5%
5%
Off
BCONFIRM ASELECT
BCONFIRM ASELECT
Setup Image Video...

28
4Settings
Setting Menu
Example:
When AAspectB is changed from A4:3B to A16:9B
ADisplay the setting menu
BSelect “Video” g “Aspect”
CSet to “16:9”
DTo end
Projected images can be adjusted to a desired view by changing the default settings.
Procedures for Menu Operation
Setup
ImageVideo Install. Func. Info.
Image Adjust
Color Temp.
Gamma
Offset
Pixel Adjust
Setup
ImageVideoInstall. Func. Info.
COMP
HDMI
AspectFilm Mode
Color System
Black Level4:3
16:9
ZoomBCONFIRM ASELECT
Setup
ImageVideoInstall. Func....

29
Preparation Basic OperationSettingsTroubleshooting Others Getting Started
ENGLISH
Item values shown in   are factory settings.
zItems that can be configured differ according to the input signals.
zAContrastB, ABrightnessB, AColorB and ASharpnessB can also be configured from the remote control. (pP16)
zATintB can only be adjusted when NTSC signals are input to the video or S-video input terminal.
*The red, green and blue colors can be adjusted and registered respectively.
zThis setting can also be...

4
30
Setting Menu (Continued)
Settings
z
ANormalB is suitable for normal circumstances but AAB, ABB or ACB can be selected according to your preference.
zThis setting can also be configured from the remote control. (pP16)
zThe horizontal and vertical directions are reversed when the image is flipped to the left or right, or flipped up or down.
zTo adjust, use still images with distinct outlines.
zAs the adjustments are minor, the effect may be difficult to see for some images.
zThis setting can also be...