JVC Projector Dla Hd1 Instructions Manual

11
Getting StartedPreparation Basic Operation Settings Troubleshooting Others
Beautiful Images on Big Screen
zEnjoy smooth and high resolution video images with no 
visible grid, brought about by full high definition resolution 
of 1920 c 1080 pixels. (pP24)
Perfect for Any Location
zComes with an 80 % vertical and 34 % horizontal 
lens shift function. (pP22)
DLA-HD1D_EN.book  Page 11  Thursday, January 11, 2007  4:34 PM 

12
1Getting Started
Getting Started
Safety Precautions................................................ 2
Main Features ...................................................10
Contents............................................................12
How to Read this Manual/
Accessories/Optional Accessories .......................13
About this Manual ......................................................... 13
Check the Accessories.................................................... 13
Optional Accessories...

13
ENGLISH
Getting StartedPreparation Basic Operation Settings Troubleshooting Others
How to Read this Manual/
Accessories/Optional Accessories
zInstruction manual, warranty card (for USA only) and other printed material are also included.
Please check with your authorized dealer for details.
z
Replacement Lamp: BHL5009-S (Lamp Unit)
zReplacement Filter: LC32058-002A (Inner Filter)
About this Manual
This manual mainly describes the operating method using the remote 
control.
z
Buttons on the remote...

1
14
Getting Started
Controls and Features
„Rear Side/Top Surface
Exhaust VentTo adjust the size of the image
(pP25) To adjust the focus
(pP25)
Lamp Cover (pP42)
To connect the power cord (pP24) Remote Sensor (pP17)
„Front Side/Left Side
Remote Sensor
(pP17)
Air inlets
Lens Cap
zThis unit comes with buffer material that cushions the lens. Remove the buffer 
material before use.
zDo not throw away the buffer material, retain for future use. (pP50)
DLA-HD1D_EN.book  Page 14  Thursday, January 11, 2007...

15
Getting StartedPreparation Basic Operation Settings Troubleshooting Others
ENGLISH
Light on (Red):
Warning mode (pP41)
Light on/Blinking (Orange):
Lamp warning (pP41)
To turn on/off the power
To hide the image temporarily (pP25)
To return to the previous menu To switch input
(pP24)
To display the menu
(pP28) Light on (Red):
Standby mode
Light on (Green):
During projection
Blinking (Green):
Image is temporarily hidden
(pP25)
Blinking (Red):
Cool Down mode (pP25)
To select or confirm
Air Inlets/Filter...

16
Controls and Features (Continued)
1Getting Started
„Remote Control
To turn on the power
To set screen size
(pP26)
To set gamma
(pP36)
To adjust the outline of the image
(pP36)
To set color temperature
(pP36)
To hide the image temporarily
(pP25) To adjust brightness
(pP36)
To return to the previous menu
To illuminate buttons on the remote control
To select or confirm Select input mode (pP24) To turn off the power
To adjust color density
(pP36) To switch image profile
(pP36)
To adjust contrast
(pP36)
To...

17
ENGLISH
Getting StartedPreparation Basic Operation Settings Troubleshooting Others
How to Use the Remote Control
zIf the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When this 
happens, replace the batteries. Insert the batteries according to the +- marks.
zBe sure to insert the - end first.
zIf an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again and 
operate the remote...

2Preparation
18
Selecting Connecting Devices
zDo not turn on the power until connection is complete.
zThe connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be 
connected.
zFor audio output, connect the device to an amplifier.
zThe images may not be displayed depending on the devices and cables to be connected.
zIt may not be possible to connect to this unit depending on the dimension of the connector cover of the cables to be...

19
Getting StartedPreparationBasic Operation Settings Troubleshooting Others
ENGLISH
Connecting
Connecting via Video Cable
Connecting via S-video Cable
Video cable (sold separately)VCR and camcorder
Video output
To video input terminal This unit
S-video output S-video cable (sold separately)
To S-video input terminal This unit
VCR and camcorder
DLA-HD1D_EN.book  Page 19  Thursday, January 11, 2007  4:34 PM 

20
Connecting (Continued)
2Preparation
z
Set ACOMPB in the setting menu to AY Pb/Cb Pr/CrB. (pP31 - P)
Connecting via HDMI Cable Or HDMI-DVI Conversion Cable
Connecting via Component Video Cable
HDMI output terminal
HDMI cable (sold separately)DVD recorder
To HDMI 1 or HDMI 2 input terminal This unit
DVI output terminal HDMI-DVI conversion cable (sold separately)
Component video output terminals
Component video cable
(sold separately)DVD player
To component video input terminals This unit
C
R/PR(Red)
C...