JVC Lt Z37dx5 Instructions
Have a look at the manual JVC Lt Z37dx5 Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9 ENGLISH LT-Z37DX5 / LCT1961-001A / English TV buttons and functions Refer to the pages in parentheses for details. 1Remote control sensor 2Power lamp (page 7) 3Illumination lamp (page 33) 4TV/VIDEO button 5MENU/OK button (page 22) 6CHANNEL p buttons 6 (page 22) 7VOLUME q buttons 5 (page 22) 8A (Stand by) button 9Headphone jack (mini jack) (page 46) Turn the TV on from standby mode Press the A button or the CHANNEL p buttons to turn the TV on from standby mode. When the TV is turned on, the power lamp lights blue. To turn the TV off: Press the A button again. The power lamp goes off. Caution •The A button on the TV does not fully isolate the TV from the AC supply. If you are not going to use the TV for a long period, be sure to disconnect the AC plug from the AC socket. Choose a TV channel Press the CHANNEL p buttons to choose a programme number (PR) or a VIDEO terminal Press the TV/VIDEO button to choose a VIDEO terminal. Adjust the volume Press the VOLUME q buttons The volume level indicator appears. Using the Menu Use the MENU/OK button Refer to “Using the TV’s menu” (see page 22) for details of using the menu. Using the Illumination When the TV is turned on the Illumination lamp lights. To adjust the illumination settings, refer to “ILLUMINATION” on page 33. 4 5 6 7 8 9 LT-Z37DX5_Eng.book Page 9 Tuesday, September 27, 2005 5:01 PM
10 LT-Z37DX5 / LCT1961-001A / English ENGLISH Remote control buttons and functions 1Muting button 2Number buttons 31 button 4c button 52 button 64 button 77 buttons 85 button 96 p buttons 0VCR/DVD/Teletext control buttons -p buttons =d (Favourite) button ~# (Standby) button !PIP/TV/DVD switch @g (Text) button #Colour buttons $H button %a button ^b button &7 q buttons *f (Freeze) button (X (Multi) button )c (Select) button Turn the TV on or off from standby mode Press the # (standby) button to turn the TV on or off When the TV is turned on, the power lamp lights blue. • The power can be turned on by pressing the 4 button, 6 p buttons or Number buttons. ~ ! 0 3 4 5 9 6 7 8 -@ % ^( & $ 1 2 # = * ) To turn the TV on or off, set the PIP/TV/ DVD switch on the remote control to the TV position and press the # button. If the PIP/TV/DVD switch on the remote control is set to the DVD position, the TV will not be turned on or off even if the # button is pressed. LT-Z37DX5_Eng.book Page 10 Tuesday, September 27, 2005 5:01 PM
Remote control buttons and functions 11 ENGLISH LT-Z37DX5 / LCT1961-001A / English Choose a TV channel and watch images from external devices „Use the number buttons: Enter the programme number (PR) of the channel using the number buttons. Example: •PR 6 → press 6 • PR 12 → press 1 and 2 „Use the 6 p buttons: Press the 6 p buttons to choose the programme number (PR) you want or a VIDEO terminal. „Use the 4 button: Press the 4 button to choose a VIDEO terminal. • The leading character is changed from V to S (eg V1 is changed to S1) when VIDEO-1 or VIDEO-2 is connected to the S terminal. • If you do not have a clear picture or no colour appears, follow the operation procedure “COLOUR SYSTEM” on page 26. • If you cannot hear the normal sound even if the picture of the TV channel appears normally. Follow the description “EDIT/ MANUAL” on page 34 to use the MANUAL function to change the SYSTEM setting.• Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with progressive-scanning component signals. • If this happens, change the output setting of the connected device to interlace- scanning component signal output. See the instructions that came with the device for more information. • The PC sound is the same as the VIDEO-3 sound. To return to a TV channel: Press the 4 button, the 6 p buttons or the number buttons. To use the programme number PR 0 (AV): When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the programme number PR 0 (AV) manually. For details, see “EDIT/ MANUAL” on page 34. (HDMI) 44 Programme numbers PR 1 – PR 99 or or LT-Z37DX5_Eng.book Page 11 Tuesday, September 27, 2005 5:01 PM
12 Remote control buttons and functions LT-Z37DX5 / LCT1961-001A / English ENGLISH Adjust the volume Press the 7 q buttons to adjust the volume. The volume level indicator appears and the volume changes as you press the 7 q buttons. „Muting the sound Press the l (muting) button to turn off the sound. Pressing the l (muting) button again restores the previous volume level. Display function You can see the channel number of the programme you are watching or the PR LIST. From the PR LIST, you can choose a channel or VIDEO terminal. Press the 5 button to display the information you want to see. Pressing the 5 button changes the display as follows: Channel number display: The channel number and channel name (when the channel name is registered) of the programme you are watching or the VIDEO terminal number is displayed.PR LIST: The programme number (PR) and VIDEO terminal list is displayed. Pressing the a button after choosing the programme number (PR) or VIDEO terminal with the 7 buttons will display the chosen programme or VIDEO terminal. • For programme numbers (PR) for which the CHANNEL GUARD function is set, the n (CHANNEL GUARD) mark is displayed. For details see “CHANNEL GUARD” on page 30. • The VIDEO terminals are registered after the programme number PR 99. • For programme numbers (PR) which is registered as a favourite channel, the d (favourite) mark is displayed. For details see “Favourite channel function” on page 17. PR ID AV 01 02 03 04 05 06 07 08 09 D0011 PR LIST OK+10-10 -EN No indication Channel number display LT-Z37DX5_Eng.book Page 12 Tuesday, September 27, 2005 5:01 PM
Remote control buttons and functions 13 ENGLISH LT-Z37DX5 / LCT1961-001A / English ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. • The ZOOM mode is fixed at FULL when you are using the TV as a PC screen or watching a 1080i or 720p picture signal. AUTO: When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to 16:9 ZOOM mode or FULL mode according to the WSS signal. If a WSS signal is not included, the picture is displayed according to the ZOOM mode set with the 4:3 AUTO ASPECT function. • For details of the 4:3 AUTO ASPECT function, see “4:3 AUTO ASPECT” on page 27. • When the AUTO (WSS) mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, press the c button and change to another ZOOM mode. REGULAR: Use to view a normal picture (4:3 aspect ratio) as this is its original shape. PANORAMIC: This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. • The top and bottom of the picture are slightly cut off. 14:9 ZOOM: This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.16:9 ZOOM: This zooms up the wide picture (16:9 aspect ratio) to the full screen. 16:9 ZOOM SUBTITLE: This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. FULL: This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen. • For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the FULL mode to restore the picture to its original shape. „Choose the ZOOM mode 1 Press the c button to display the ZOOM menu 2 Press the 6 buttons to choose a ZOOM mode. Then press the a button The picture expands and the chosen ZOOM mode is displayed in about 5 seconds. • The ZOOM mode may be automatically changed by the control signal from an external device. When you want to return to the previous ZOOM mode, choose the ZOOM mode again. D0009 AUTO ZOOM OK REGULAR PANORAMIC 14:9 ZOOM 16:9 ZOOM 16:9 ZOOM SUBTITLE FULL -EN LT-Z37DX5_Eng.book Page 13 Tuesday, September 27, 2005 5:01 PM
14 Remote control buttons and functions LT-Z37DX5 / LCT1961-001A / English ENGLISH „Adjusting the visible area of the picture If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears. 2 Press the a button to display the ZOOM mode indicator The indicator appears. 3 While it is displayed, press the 6 buttons to change the position of the picture • You cannot adjust the visible area in REGULAR or FULL mode. The visible area adjustment is saved even after the TV channel is changed. However, it is cancelled if the following operations are performed. • The power is turned off/on • The ZOOM mode is changed • The X (Multi) button, f (Freeze) button, or g (Text) button is pressed • The TV is switched between TV mode and VIDEO mode CINEMA SURROUND function You can enjoy sounds with a wider ambience. • This function does not work for the sound from headphones. Press the 2 button to select one of CINEMA SURROUND modes HIGH/LOW: When you listen to stereo sound, please select HIGH or LOW mode. You can enjoy sound similar to the experience at the theatre. When you combine the functions of A.H.B. and BBE, you can enjoy more powerful sound.• When you set the CINEMA SURROUND function to HIGH mode, there may be slight volume distortion. If that occurs, please switch to LOW mode. The effect of CINEMA SURROUND functions will be less noticeable, but the volume distortion will be corrected. MONO: Select the MONO mode, when you listen to the mono sound. You can enjoy the sound for a wider audience similar to stereo sound. OFF: The CINEMA SURROUND function switches off. • You can choose the CINEMA SURROUND mode with the “SOUND menu” (see page 28). Using the “Freeze” function You can view the current programme as a still picture. 1 Set the PIP/TV/DVD switch to the PIP position When using the “Freeze” function, set the PIP/TV/DVD switch to the PIP position. 2 Press the f button The still picture of the current picture will appear. 16 : 9 ZOOMD0010-EN D0056 current programmestill picture LT-Z37DX5_Eng.book Page 14 Tuesday, September 27, 2005 5:01 PM
Remote control buttons and functions 15 ENGLISH LT-Z37DX5 / LCT1961-001A / English To cancel the “Freeze” function: Press the f button, the 6 p buttons or the number buttons. • The “Freeze” function does not work while a sub-picture is displayed. • The still picture cannot be output from the TV. • The “Freeze” function does not work for picture of PC signals. Using the “Multi-picture” function 1 Set the PIP/TV/DVD switch to the PIP position When using the “Multi-picture” function, set the PIP/TV/DVD switch to the PIP position. 2 Press the X button The “Multi-picture” menu appears. 3 Press the 5 buttons to choose the number of screens and then press the a button 2-pictures multi: With 1080i and 720p signals, the screen is split into two as shown below.12-pictures multi: • When set to 2-pictures multi, you can view a TV picture and a picture from an external device. You cannot view a TV picture on more than one screen at the same time. • When 12-pictures multi is set, pictures from external devices are not displayed. • When watching a picture from the HDMI signal, 12-pictures multi can not be displayed. • When set to 2-pictures multi, the main- picture can be changed by pressing the 6 p buttons. The sub- picture screen can be changed by pressing the 6 buttons. When set to 12-pictures multi and there are more than 12 pictures, the next or previous 12 screens can be displayed by pressing the 6 p buttons. • When set to 2-pictures multi, the main- picture sound from the TV speaker can be changed to the sub-picture sound by pressing the c button when the PIP/ TV/DVD switch is set to the PIP position. (The speaker mark moves from the main-picture to the sub- picture.) The sound changes to the main-picture sound if the c button is pressed again. When the headphones are connected, you can listen to the sound from the side at which the headphones mark is displayed. No sound comes from the TV speaker. • When set to 2-pictures multi, picture from HDMI can not be displayed on the Sub-picture. • The pictures from VIDEO-1 (or VIDEO-3) cannot be displayed in the sub-picture when the VIDEO-1 SETTING (or VIDEO-3 SETTING) is set to COMPONENT (see page 38). 1 D0101 212 D0102 1 D0103 2 D0104 12 Choose to return to one screen. Choose to change to 2-pictures multi. Choose to change to 12-pictures multi. D0056 Main- pictureSub- picture D1056 Main- picture Sub- picture D0058 Still pictures Moving picture LT-Z37DX5_Eng.book Page 15 Tuesday, September 27, 2005 5:01 PM
16 Remote control buttons and functions LT-Z37DX5 / LCT1961-001A / English ENGLISH • The “Multi-picture” function does not work for a PC signals. • When set to 12-pictures multi, press the 7 buttons to choose the screen you want to view and the press the a button to display that picture on the whole screen. • The BLUE BACK function does not work when the “Multi-picture” function is being used. • The ZOOM function does not work when the “Multi-picture” function is being used. To return the “Multi-picture” to one screen: Press the X button, press the 5 buttons to choose one screen, and then press the a button. • Pressing the 4 button will also return the display to one screen. RETURN PLUS function and Return function The 1 button has two functions; the RETURN PLUS function and the Return function. If a channel has been registered as the “Return Channel”, the RETURN PLUS function operates. If there is no setting for the “Return Channel”, the Return function operates. „RETURN PLUS By registering a channel you frequently view as the “Return Channel”, you can select that channel at any time simply by pressing the 1 button. To register a TV channel as the “Return Channel”: Choose the Programme number to which the channel you want to register has been set, and press the 1 button and hold for more than 3 seconds continuously. “RETURN PLUS PROGRAMMED!” is displayed and the registration is completed.To cancel a TV channel registered as the “Return Channel”: While viewing any TV channel, press the 1 button and hold for more than 3 seconds continuously. “RETURN PLUS CANCELED!” is displayed and the registration is cancelled. • When you turn off the TV, the registration for the “Return Channel” is cancelled. • If you want to view the “Return Channel” and another TV channel alternately, first choose a channel other than the “Return Channel”. And then press the 1 button to change the channel to the “Return Channel” In this way, you can view two channels alternately by pressing the 1 button. „Return function The TV temporarily memorises the TV channel that was chosen right before the current TV channel as the “Last Channel”. By pressing the 1 button, you can alternately view the current TV channel and the “Last Channel”. If you want to view two channels alternately by using the Return function, first choose one TV channel and then choose the other TV channel with the number buttons. If you choose the TV channel without using the number buttons, there are cases where a channel other than the one you first chose is registered as the “Last Channel”. LT-Z37DX5_Eng.book Page 16 Tuesday, September 27, 2005 5:01 PM
Remote control buttons and functions 17 ENGLISH LT-Z37DX5 / LCT1961-001A / English Favourite channel function You can register your favourite TV channels (PR 1 – PR 99) in the number buttons 1 to 4. After registering, the channel can be called by pressing the d (favourite) button and a number button 1 to 4. „Favourite channel registration 1 In the normal screen, choose a TV channel (PR 1 – PR 99) that you want to register For details, refer to “Choose a TV channel and watch images from external devices” on page 11. 2 Press and hold the d (favourite) button for three seconds or more Then “SET 1-4?” appears on the screen. 3 Press one of the number buttons 1 to 4 The current channel is registered in the pressed number button. After “PROGRAMMED!” appears on the screen, the favourite channel icon appears at the top-right of the screen. • If the channel you are trying to register is already registered in one of the other number buttons 1 to 4, “NOT AVAILABLE” appears on the screen. • Channels locked with the CHANNEL GUARD function cannot be registered. • If AUTO PROGRAM is performed, the registered favourite channels are reset. • When you want to delete a favourite channel, delete the set channel and set contents with FAVOURITE SETTING (see page 32) in the FEATURES menu. „Calling the favourite channel 1 In the normal screen, press the d (favourite) button Then “FAVOURITE1-4?” appears. 2 Press one of the number buttons 1 to 4 The called favourite channel appears on the screen. • If a number button in which no channel is registered is pressed, “NO MEMORY” appears on the screen. „Setting the picture effect When a favourite channel has been chosen with the d (favourite) button and number buttons 1 to 4, picture effect settings can be memorised for each favourite channel by setting the picture effects in the PICTURE menu (see page 24). The following items in the PICTURE menu (see page 24) are memorised. PICTURE MODE BACK LIGHT CONTRAST BRIGHT SHARP COLOUR TINT WHITE BALANCE DIGITAL VNR COLOUR SYSTEM The last setting made for each item is memorised. LT-Z37DX5_Eng.book Page 17 Tuesday, September 27, 2005 5:01 PM
18 Remote control buttons and functions LT-Z37DX5 / LCT1961-001A / English ENGLISH Operating a JVC brand DVD player These buttons will operate a JVC brand DVD player. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control. 1 Set the PIP/TV/DVD switch to the DVD position When you are operating the DVD player, set the switch to the DVD position. • You can turn the DVD player on or off with the # (standby) button. • You can also press the H or T button and display the DVD disc menu screen, and then operate by pressing the 7 buttons. 2 Press the DVD control button to control your DVD player • If your DVD player is not made by JVC, these buttons will not work. • Even if your device is made by JVC, some of these buttons may not work, depending on the device you are using. You cannot turn the TV on or off when the PIP/TV/DVD switch is set to the DVD position. When you turn the TV on or off, set the PIP/TV/DVD switch to the TV position. LT-Z37DX5_Eng.book Page 18 Tuesday, September 27, 2005 5:01 PM