JVC Lt 42z48 Instructions
Have a look at the manual JVC Lt 42z48 Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
INSTRUCTIONS WIDE LCD PANEL TV LT-42Z48 GGT0251-001A-H LT-42Z48_EN.book Page 0 Wednesday, July 23, 2008 10:29 AM
1Warning Please follow all the guidelines below Follow this manual regarding setup! zConnect only to a 110 - 240 V, 50/60 Hz AC outlet. Unplug the power cord when going out! zThe power buttons on the remote control and the TV unit cannot completely turn off the TV. (Make appropriate arrangements for bedridden people.) Make enough room for inserting and removing the power plug! Place the TV as close to the outlet as possible! zEven if the TV’s power lamp is unlit, the main power supply is not cut off unless the power cord is unplugged. The main power supply for this TV is controlled by inserting or removing the power plug. Never cut or damage the power cord! zIf the power plug is not the right shape, or the power cord is not long enough, use an appropriate plug adapter or extension cable. (Consult your retailer.) Never try to repair the TV yourself! gIf the problem cannot be solved in “Troubleshooting” (P. 26), unplug the power cord and contact your retailer. „For more details on installation, usage and safety g Consult your retailer When attaching the TV to the wall, use the optional JVC wall mounting unit! zConsult a qualified technician. zSee the included manual on mounting procedures. zJVC assumes no responsibility for damage due to improper mounting. Do not allow the TV to fall!zDo not rest your elbows on, or allow children to hang from the TV. There is a risk that the TV will fall and cause injuries. zMake use of the hole on the back of the stand to prevent the TV from falling easily. (P. 6) If the TV is damaged or behaving strangely, stop using it at once! gUnplug the power cord and contact your retailer. Handle LCD panel with care!zUse a soft, dry cloth when cleaning. Never dismantle the rear panel!zIt may cause an electric shock. Never place anything on the TV! Never expose to rain or moisture! Never insert objects into the cabinet openings! zIt may cause a fatal electric shock. Take care when children are near. Never obstruct the ventilation holes! zIt may cause overheating or a fire. zPlacing liquids, naked flames, cloths, paper, etc. on the TV may cause a fire. zTo prevent fire or electric shock, never allow liquids to enter the unit. Never listen to headphones at high volume! zIt may damage your hearing. Hold the TV so as not to scratch the screen! zDo not touch the screen when carrying the TV. Do not carry the TV on your own! zIn order to prevent accidents, ensure that the TV is carried by two or more people. LT-42Z48_EN.book Page 1 Wednesday, July 23, 2008 10:29 AM
USE SETTING TROUBLE? PREPARE IMPORTANT 2 Please read “Getting started” (P. 6 - 11). The main descriptions are in the following pages. Contents Connecting the external devices and aerial Initial settings Editing channels 7 PA G E 8 PA G E Language 9 PA G E 10 PA G E First things first!zWarning .............................................. 1 Getting startedzRemote control................................... 3 z Names and functions of parts ............ 4 z Getting started ................................... 6 Let’s try it out Try the advanced featureszEnjoy your new TV! .......................... 12 z Watching TV..................................... 13 z Viewing Teletext ............................... 14 z Watching videos / DVDs .................. 15 z Useful functions ............................... 16 Just the way you like itzConfiguring your remote control....... 17 z Customising your TV........................ 19 Picture ............................................. 19 Features (sub menu)....................... 20 Sound.............................................. 21 Features .......................................... 22 Set Up ............................................. 24 When you have troublezTroubleshooting ............................... 26 z Technical information ....................... 28 z “CH/CC” list ...................................... 29 z Specifications ................................... 30 To set up your TV LT-42Z48_EN.book Page 2 Wednesday, July 23, 2008 10:29 AM
3 466)$%/ LCD STBAUDIO MODE 2%452. #LEAR3$ CH CH VOL VOL $)30,!9 SLEEP TIMER TOP MENU MuteTurn on / off (standby) the TV Enter channel / page number View Teletext (P. 14) Colour buttons Display on-screen menu (P. 19) Select and confirm settings in menus Change channel / page For Hyper Scan, press and hold CH or CH , PR changes without changing the picture screen. Once you release the button, the picture of the selected PR will appear. To the previous screen Functions for viewing Teletext (P. 14) Set the sleep timer (P. 16) Select a picture mode (P. 16) Return to a frequently watched channel (P. 13) Turn on “Clear SD” (P. 20) Switch between “TV / STB / DVD / AUDIO” (P. 17) Switch between TV / VIDEO devices Volume control / Turn off muting Display PR List and channel information Choose a favourite channel (P. 13) Change the aspect ratio (P. 16)Turn on “Sound Effect” (P. 16) zFor buttons that can be used to operate other devices, refer to “Configuring your remote control” (P. 17). Note Remote control LT-42Z48_EN.book Page 3 Wednesday, July 23, 2008 10:29 AM
4 USE SETTING TROUBLE? PREPARE IMPORTANT Power lamp TV/VIDEO CHANNEL VOLUMEMENU/OK Remote control sensor Turn On / Off (standby) the TV To headphones Change channel / page / Hyper Scan (P. 3) Switch between TV / VIDEO devices Display on-screen menu / set Volume / adjust ON: Lit (Blue) OFF: Unlit z When “Power Lamp” is set to “Off”, the Power lamp will not light up. g“Power Lamp” (P. 23) Names and functions of parts LT-42Z48_EN.book Page 4 Wednesday, July 23, 2008 10:29 AM
5 Insert the stand into the panel at the position where the screw holes are and fasten the screws (x 4, provided). zIf you face any problem with the st and assembly, please contact your retailer or authorised dealer. Change the direction of TVAttach the stand to the TV 1 2 Note Names and functions of parts LT-42Z48_EN.book Page 5 Wednesday, July 23, 2008 10:29 AM
6 USE SETTING TROUBLE? PREPARE IMPORTANT Please read P. 7 - 11 of this manual to set up your TV. zStand and screws are also included. For details, refer to page 5. Power requirements z Connect the power cord only to a 110 - 240 V, 50/60 Hz AC outlet. When attaching the TV to the wall, us e the optional JVC wall mounting unit z Consult a qualified technician. z See the included manual on mounting procedures. z JVC assumes no responsibility for damage due to improper mounting. z Mounting holes for wall mounting unit: M5 x 4, 400 mm x 200 mm Depth of screw hole is 13 mm from the surface of the TV. Installation requirements z Place the TV on a flat and stable location. z To avoid overheating, ensure the unit has ample room. z To prevent the TV from falling, thread the belt through the hole on the back of the stand and secure it to the TV rack, etc. Use two “AAA/R03” dry cell batteries. Insert the batteries from the - end, making sure the + and - polarities are correct. Check accessories Install your TV Remote control RM-C1940“AAA/R03” Batteries (For confirming the TV works) WARNING: Batteries shall not be exposed to excessive heat such as direct sunshine, fire or the like. Insert the batteries 200 mm 150 mm 50 mm 150 mm 50 mm Hole Belt and screw (not provided) If this symbol is shown, it is only valid in the European Union. Getting started LT-42Z48_EN.book Page 6 Wednesday, July 23, 2008 10:29 AM
7 Make sure all the devices and the TV are turned off. You can connect many different devices to the rear panel of the TV. Please read the user manuals of each device before setting up. (Connecting cables are not supplied with this TV.) Connecting your external devices PrPbY R LRLV RLV RLVSVIDEO-2 VIDEO-1 PCPCAUDIOPC IN(D-SUB) OUTPUTHDMI-1( DVI ANALOG AUDIO ) PrPbY R L VVIDEO-1PrPb Y R L VVIDEO-1 JVC JVC Component input DVD Player HDMI-1HDMI-2HDMI-3 DVD player (HDMI compatible) Not available. (For service adjustments) Digital Satellite broadcast tuner HD Video camera DVD player To VIDEO-2 Game consoles Video camera PC input line in PC Composite input Game consoles Video camera VCR g : signal direction Getting started z Use component signal g“VIDEO Setting” (P. 24) z If both composite and S-VIDEO cables are connected, S-VIDEO input takes priority over composite inputs. z “HDMI-1 Audio Setting” g (P. 24) z HDMI-2 and HDMI-3 inputs do not support analogue sound. OUTPUTVideo and sound signals of a TV channel you are viewing output from these terminals DVI devices g“Connect DVI devices” (P. 28) VIDEO-1Watching videos Output jInputh • Composite signal / Component signal (P. 31) • Sound L / R VIDEO-2Watching videos Output jInputh • Composite signal / S-VIDEO • Sound L / R HDMI-1 HDMI-2 HDMI-3Connecting HDMI devices Output jInputh • HDMI signal (P. 31) Output j • Composite signal • Sound L / R LT-42Z48_EN.book Page 7 Wednesday, July 23, 2008 10:29 AM
8 USE SETTING TROUBLE? PREPARE IMPORTANT Connecting an aerial and VCR / DVD player VIDEO-2VID EO -2R L VS AERIAL z After all the connections have been made, insert the plug into an AC outlet. VCR / DVD player OR LT-42Z48_EN.book Page 8 Wednesday, July 23, 2008 10:29 AM
9 The initial settings will begin automatically when the TV is turned on for the very first time. Follow the on-screen instructions to perform the settings. Initial settings 1Turn on z If the remote control doesn’t work, confirm that the mode is set to “TV”. 2Start initial settings zIf the JVC logo does not appear, refer to “To perform initial settings again”. 3Select a language To the previous screen g Exit g To perform initial settings again Take note that performing initial settings again will cause all channel related settings to be los t. Press the “MENU” button to display the menu, then press and hold the number button “1” for more than 3 seconds to start initial settings. If you wish to make changes later g “Language” and “Auto Program” (P. 24) Language B set A select 4Select the Teletext language group 5Automatically register channels 6Check what was registered To edit channels g“Editing channels” (P. 10) 7Finish selectGroup-4 Group-5 Group-3 Group-2 Group-1 Teletext Language Auto Program CH 02 0% select a channel_ _ _ _ _ AV PR ID Edit CH/CC 01 CH 02 CH 03 CH 04 05 06 07 CH CH CC CC02 03 04 05 06 01 02 Getting started Ini LCD LT-42Z48_EN.book Page 9 Wednesday, July 23, 2008 10:29 AM