JVC Kds6060 Instruction Manual

11
ENGLISH
Playing a CD
Insert a CD into the loading slot.
The unit turns on, draws
the CD and starts
playback automatically.
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing
CD turns on the unit and starts playback
automatically.
All tracks will be played repeatedly until you stop
playback.
CD OPERATIONS
Note:
When a CD is inserted upside down, “EJECT”
appears on the display and the CD automatically
ejects.
To stop play and eject the CD
Press 0.
CD play stops and the CD...

12
ENGLISH
Locating a track or a
particular portion on a CD
To fast-forward or reverse the track
To go to the next or previous tracks
To go to a particular track directly
Press the number button corresponding to the
track number to start its playback.
•To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
•To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than one
second.Press and hold 
 ¢, while
playing a CD, to fast-forward the
track.
Selecting CD playback modes...

13
ENGLISH
To play back tracks repeatedly
(Repeat Play)
You can play back the current track repeatedly.
1Press MODE to enter the
functions mode while playing a
CD.
2Press RPT (repeat), while still
in the functions mode, so that
the RPT indicator lights up on
the display.
Each time you press the
button, CD repeat play mode
turns on and off alternately.
When Repeat Play is turned on, the RPT
indicator lights up on the display. The current
track starts playing repeatedly.
Prohibiting CD ejection
You can...

14
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1Select the item you want to adjust.
Each time you press the
button, the adjustable items
change as follows:
Indication To do: Range
BAS Adjust the bass. –06 (min.)
   |
+06 (max.)
TRE Adjust the treble. –06 (min.)
   |
+06 (max.)
FAD* Adjust the front R06 (Rear only)
and rear speaker    |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker    |
balance. R06 (Right...

15
ENGLISH
Indication For: Preset values
BAS TRE LOUD
SCM OFF (Flat sound) 00 00 ON
BEAT Rock or +02 00 ON
disco music
SOFT Quiet +01 –03 OFF
background
music
POP Light music +04 +01 OFF
Recalling the sound modes
When “SCM LINK” is set to “LINK ON,”
select the source.
Each time you change the
playback source, the SCM
indicator flashes on the
display.
The sound mode stored in memory for the
selected source is recalled.
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If...

16
ENGLISH
3Repeat step 2 to adjust the other
items.
4Press and hold SCM until the sound
mode you have selected in step 
1
flashes on the display.
Your adjustment made for the
selected sound mode is stored
in memory.
5Repeat the same procedure to store
other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on page 15.
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store...

17
ENGLISH
Selecting the level display
—LEVEL
You can select the level display according to your
preference.
When shipped from the factory, “VOL 2” is
selected.
• VOL 1: Shows the volume level indicator.
• VOL 2: Alternates “VOL 1” setting and
illumination display.
• OFF: Erases the volume level indicator.
1Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,” or
“LEVEL” appears on the display.
2Select “LEVEL” if not shown on the
display.
3Select the desired mode—“VOL...

18
ENGLISH
Detaching the control panel
You can detach the control panel when leaving
the car.
When detaching or attaching the control panel,
be careful not to damage the connectors on the
back of the control panel and on the panel
holder.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
1Unlock the control panel.
2Lift and pull the control panel out of
the unit.
3Put the detached control panel into
the provided case.
Attaching the control panel
1Insert the...

19
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
 General
Remedies
Adjust it to the optimum level.
Check the cords and
connections.
While holding SEL (select),
press 
 (standby/on
attenuator) for more than
2 seconds to reset the unit. (The
clock setting and preset stations
stored in memory are erased.)
(See page 2.)
Store stations manually.
Connect the aerial firmly.
Insert the CD correctly.
• Insert a finalized...

20
ENGLISH
MAINTENANCE
Handling discs
This unit has been designed to reproduce CDs
and CD-Rs (Recordable).
• This unit is not compatible with MP3 discs.
How to handle discs
When removing a disc
from its case, press down
the center holder of the case and
lift the disc out, holding
it by the edges.
•Always hold the disc by the edges. Do not
touch its recording surface.
When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
•Make sure to...