JVC Hd Z70rx5 Instructions

							Remote control buttons and functions
9
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
To return to a TV channel:
Press the 4 button, the 6 p buttons or the 
number buttons.
To use the programme number PR 0 (AV):
When the TV and VCR are connected only by the aerial cable, 
choosing the programme number PR 0 (AV) allows you to view 
images from the VCR. Set the VCR RF channel to the programme 
number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on 
page 21.
Adjusting the volume
Press the 7 q buttons to adjust the volume.
The volume level indicator appears and the volume changes as you 
press the 7 q buttons.
„Muting the sound
Press the 
l (muting) button to turn off the sound.
Pressing the 
l (muting) button again restores the previous volume 
level.
Display function
You can see the channel number of the programme you are watching 
or the PR LIST.
From the PR LIST, you can choose a channel or VIDEO terminal.
Press the 
5 button to display the information you 
want to see.
Pressing the 
5 button changes the display as follows:
Channel number display:
The channel number and channel name (when the channel name is 
registered) of the programme you are watching or the VIDEO 
terminal number is displayed.
PR LIST:
The programme number (PR) and VIDEO terminal list is displayed.
Pressing the a button after choosing the programme number (PR) 
or VIDEO terminal with the 7 buttons will display the 
chosen programme or VIDEO terminal.
• For programme numbers (PR) for which the CHANNEL GUARD 
function is set, the n (CHANNEL GUARD) mark is displayed. For 
details see “CHANNEL GUARD” on page 19.
• The VIDEO terminals are registered after the programme number 
PR 99.
• For programme numbers (PR) which are registered as a favourite 
channel, the d (favourite) mark is displayed. For details see 
“Favourite channel function” on page 12.
ZOOM function
You can change the screen size according to the picture aspect ratio. 
Choose the optimum one from the following ZOOM modes.
• The ZOOM mode is fixed at FULL when you are using the TV as 
a PC screen or watching a 1080i or 720p picture signal.
AUTO:
When a WSS (Wide Screen Signalling) signal, which shows the 
aspect ratio of the picture, is included in the broadcast signal or the 
signal from an external device, the TV automatically changes the 
ZOOM mode to 16:9 ZOOM mode or FULL mode according to the 
WSS signal.
If a WSS signal is not included, the picture is displayed according to 
the ZOOM mode set with the 4:3 AUTO ASPECT function.
• For details of the 4:3 AUTO ASPECT function, see “4:3 AUTO 
ASPECT” on page 17.
• When the AUTO (WSS) mode does not function correctly due to 
poor WSS signal quality or when you want to change the ZOOM 
mode, press the c button and change to another ZOOM 
mode.
REGULAR:
Use to view a normal picture (4:3 aspect ratio) as this is its original 
shape.
PANORAMIC:
This stretches the left and right sides of a normal picture (4:3 aspect 
ratio) to fill the screen, without making the picture appear unnatural.
• The top and bottom of the picture are slightly cut off.
14:9 ZOOM:
This zooms up the wide picture (14:9 aspect ratio) to the upper and 
lower limits of the screen.
16:9 ZOOM:
This zooms up the wide picture (16:9 aspect ratio) to the full screen. 
16:9 ZOOM SUBTITLE:
This zooms up the wide picture (16:9 aspect ratio) with subtitles to 
the full screen. 
FULL:
This uniformly stretches the left and right sides of a normal picture 
(4:3 aspect ratio) to fill the wide TV screen.
• For 16:9 aspect ratio pictures that have been squeezed into a 
normal picture (4:3 aspect ratio), use the FULL mode to restore the 
picture to its original shape.
PR ID
AV
01
02
03
04
05
06
07
08
09 PR LIST
OK+10 -10
No indication Channel number display
HD-Z70&56RX5_Eng.book  Page 9  Tuesday, October 11, 2005  9:17 PM
 
						

							10
Remote control buttons and functions
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
„Choose the ZOOM mode
1 Press the c button to display the ZOOM menu
2 Press the 6 buttons to choose a ZOOM mode. Then 
press the a button
The picture expands and the chosen ZOOM mode is displayed in 
about 5 seconds.
„Adjusting the visible area of the picture
If subtitles or the top (or bottom) of the picture are cut off, you can 
adjust the visible area of the picture manually.
1 Press the c button
The ZOOM menu appears.
2 Press the a button to display the ZOOM mode 
indicator
The indicator appears.
3 While it is displayed, press the 6 buttons to change 
the position of the picture
• You cannot adjust the visible area in REGULAR or FULL 
mode.
The visible area adjustment is saved even after the TV channel is 
changed.
However, it is cancelled if the following operations are performed.
• The power is turned off/on
• The ZOOM mode is changed
• The X (Multi) button, f (Freeze) button, or g (Text) button is 
pressed
• The TV is switched between TV mode and VIDEO mode
CINEMA SURROUND function
You can enjoy sounds with a wider ambience.
• This function does not work for the sound from headphones.
Press the 2 button to select one of CINEMA 
SURROUND modes
HIGH/LOW:
When you listen to stereo sound, please select HIGH or LOW mode.
You can enjoy sound similar to the experience at the theatre.
When you combine the functions of A.H.B. and BBE, you can enjoy 
more powerful sound.
• When you set the CINEMA SURROUND function to HIGH 
mode, there may be slight volume distortion. If that occurs, please 
switch to LOW mode. The effect of CINEMA SURROUND 
functions will be less noticeable, but the volume distortion will be 
corrected.
MONO:
Select the MONO mode, to listen to the mono sound.
You can enjoy the sound for a wider audience similar to stereo sound.
OFF:
The CINEMA SURROUND function switches off.
• You can choose the CINEMA SURROUND mode with the 
“SOUND menu” (see page 18).
Using the “Freeze” function
You can view the current programme as a still picture.
1 Set the VCR/TV/DVD switch to the TV position
When using the “Freeze” function, set the VCR/TV/DVD switch 
to the TV position.
2 Press the f button
The still picture of the current picture will appear.
To cancel the “Freeze” function:
Press the f button, the 6 p buttons or the number 
buttons.
• The “Freeze” function does not work while a sub-picture is 
displayed.
• The still picture cannot be output from the TV.
• The “Freeze” function does not work for picture of PC signals.
ZOOM
OK
REGULAR AUTO
PANORAMIC
14:9 ZOOM
16:9 ZOOM
16:9 ZOOM SUBTITLE
FULL
16 : 9   ZOOM
current
programmestill picture
HD-Z70&56RX5_Eng.book  Page 10  Tuesday, October 11, 2005  9:17 PM
 
						

							Remote control buttons and functions
11
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
Using the “Multi-picture” function
1 Set the VCR/TV/DVD switch to the TV position
When using the “Multi-picture” function, set the VCR/TV/DVD 
switch to the TV position.
2 Press the X button
The “Multi-picture” menu appears.
3 Press the 5 buttons to choose the number of screens 
and then press the a button
2-pictures multi:
With 1125i and 750p signals, the screen is split into two as shown 
below.
12-pictures multi:
• When set to 2-pictures multi, you can view a TV picture and a 
picture from an external device. You cannot view a TV picture 
on more than one screen at the same time.
• When 12-pictures multi is set, pictures from external devices are 
not displayed.
• When watching a picture from the HDMI signal, 12-pictures 
multi can not be displayed.
• When set to 2-pictures multi, the main-picture can be changed 
by pressing the 6 p buttons. The sub-picture 
screen can be changed by pressing the p buttons.
When set to 12-pictures multi and there are more than 12 
pictures, the next or previous 12 screens can be displayed by 
pressing the 6 p buttons.
• When set to 2-pictures multi, the main-picture sound from the 
TV speaker can be changed to the sub-picture sound by 
pressing the c button when the VCR/TV/DVD switch is set to 
the VCR position. (The speaker mark moves from the main-
picture to the sub-picture.)
The sound changes to the main-picture sound if the c button is 
pressed again.
When the headphones are connected, you can listen to the 
sound from the side at which the headphones mark is displayed. 
No sound comes from the TV speaker.• When set to 2-pictures multi, picture from HDMI can not be 
displayed on the Sub-picture.
• The pictures from VIDEO-1 (or VIDEO-2) cannot be displayed 
in the sub-picture when the VIDEO-1 SETTING (or VIDEO-2 
SETTING) is set to COMPONENT (see page 23).
• The “Multi-picture” function does not work for a PC signals.
• When set to 12-pictures multi, press the 7 buttons to 
choose the screen you want to view and the press the a 
button to display that picture on the whole screen.
• The BLUE BACK function does not work when the “Multi-
picture” function is being used.
• The ZOOM function does not work when the “Multi-picture” 
function is being used.
To return the “Multi-picture” to one screen:
Press the X button, press the 5 buttons to choose one screen, 
and then press the a button.
•Pressing the 4 button will also return the display to 
one screen.
RETURN PLUS function and Return 
function
The 1 button has two functions; the RETURN PLUS 
function and the Return function. If a channel has been registered as 
the “Return Channel”, the RETURN PLUS function operates. If there 
is no setting for the “Return Channel”, the Return function operates.
„RETURN PLUS
By registering a channel you frequently view as the “Return 
Channel”, you can select that channel at any time simply by pressing 
the 1 button.
To register a TV channel as the “Return Channel”:
Press and hold 1 button for more than 3 seconds while the 
channel you want to register is chosen.  “RETURN PLUS 
PROGRAMMED!” is displayed and the registration is completed.
To cancel a TV channel registered as the “Return 
Channel”: 
While viewing any TV channel, press the 1 button and 
hold for more than 3 seconds continuously. “RETURN PLUS 
CANCELED!” is displayed and the registration is cancelled.
• When you turn off the TV, the registration for the “Return 
Channel” is cancelled.
• If you want to view the “Return Channel” and another TV channel 
alternately, first choose a channel other than the “Return Channel”. 
And then press the 1 button to change the channel to 
the “Return Channel.” In this way, you can view two channels 
alternately by pressing the 1 button.
„Return function
The TV temporarily memorises the TV channel that was chosen right 
before the current TV channel as the “Last Channel”. By pressing the 
1 button, you can alternately view the current TV channel 
and the “Last Channel”.
If you want to view two channels alternately by using the Return 
function, first choose one TV channel and then choose the other TV 
channel with the number buttons. If you choose the TV channel 
without using the number buttons, there are cases where a channel 
other than the one you first chose is registered as the “Last Channel”.
1212
1
2
12
Choose to return to one screen.
Choose to change to 2-pictures multi.
Choose to change to 12-pictures multi.
Main-
pictureSub-
picture
Main-
pictureSub-
picture
Still 
pictures
Moving 
picture
HD-Z70&56RX5_Eng.book  Page 11  Tuesday, October 11, 2005  9:17 PM
 
						

							12
Remote control buttons and functions
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
Favourite channel function
You can register your favourite TV channels (PR 1 – PR 99) in the 
number buttons 1 to 4.
After registering, the channel can be called by pressing the d 
(favourite) button and a number button 1 to 4.
„Favourite channel registration
1 In the normal screen, choose a TV channel (PR 1 – PR 
99) that you want to register
2 Press and hold the d (favourite) button for three 
seconds or more
Then “SET 1-4?” appears on the screen.
3 Press one of the number buttons 1 to 4
The current channel is registered in the pressed number button.
After “PROGRAMMED!” appears on the screen, the favourite 
channel icon appears at the top-right of the screen.
• If the channel you are trying to register is already registered in 
one of the other number buttons 1 to 4, “NOT AVAILABLE” 
appears on the screen.
• Channels locked with the CHANNEL GUARD function cannot 
be registered.
• If AUTO PROGRAM is performed, the registered favourite 
channels are reset.
• When you want to delete a favourite channel, delete the set 
channel and set contents with FAVOURITE SETTING (see 
page 20) in the FEATURES menu.
„Calling the favourite channel
1 In the normal screen, press the d (favourite) button
Then “FAVOURITE1-4?” appears.
2 Press one of the number buttons 1 to 4
The called favourite channel appears on the screen.
• If a number button in which no channel is registered is pressed, 
“NO MEMORY” appears on the screen.
„Setting the picture effect
When a favourite channel has been chosen with the d (favourite) 
button and number buttons 1 to 4, picture effect settings can be 
memorised for each favourite channel by setting the picture effects in 
the PICTURE menu (see page 15).
The following items in the PICTURE menu (see pages 15 to 17) are 
memorised.
PICTURE MODE
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
WHITE BALANCE
DIGITAL VNR
COLOUR SYSTEM
The last setting made for each item is memorised.
Operating a JVC brand DVD player
These buttons will operate a JVC brand DVD player. Pressing a 
button that looks the same as the device’s original remote control 
button has the same function as the original remote control.
1 Set the VCR/TV/DVD switch to the DVD position
When you are operating the DVD player, set the switch to the 
DVD position.
• You can turn the DVD player on or off with the # (standby) 
button.
• You can also press the H or T button and 
display the DVD disc menu screen, and then operate by 
pressing the 7 buttons and OK button.
2 Press the DVD control button to control your DVD player
• If your DVD player is not made by JVC, these buttons will not 
work.
• Even if your device is made by JVC, some of these buttons may 
not work, depending on the device you are using.
Operating a JVC brand VCR
These buttons will operate a JVC brand VCR. Pressing a button that 
looks the same as the device’s original remote control button has the 
same function as the original remote control.
1 Set the VCR/TV/DVD switch to the VCR position
When you are operating the VCR, set the switch to the VCR 
position.
• You can turn the VCR on or off with the # (standby) button.
2 Press the VCR control button to control your VCR
• If your VCR is not made by JVC, these buttons will not work.
• Even if your device is made by JVC, some of these buttons may 
not work, depending on the device you are using. You cannot turn the TV on or off when the VCR/TV/DVD switch is 
set to the DVD position.
When you turn the TV on or off, set the VCR/TV/DVD switch to the 
TV position.
You cannot turn the TV on or off when the VCR/TV/DVD switch is 
set to the VCR position.
When you turn the TV on or off, set the VCR/TV/DVD switch to the 
TV position.
HD-Z70&56RX5_Eng.book  Page 12  Tuesday, October 11, 2005  9:17 PM
 
						

							LT-Z70/56RX5 / LCT1911-001A / English
13
ENGLISH
Teletext function
Basic operation
1 Choose a TV channel with a teletext broadcast
2 Set the VCR/TV/DVD switch to the TV position
3 Press g (Text) button to display the teletext
Pressing g (Text) button changes the mode as follows:
4 Choose a teletext page by pressing the 6 p 
buttons, number buttons or colour buttons
To return to the TV mode:
Press the 4 button, b button, or g (Text) button.
• If you have trouble receiving teletext broadcasts, consult your 
local dealer or the teletext station.
• The ZOOM function will not work in the TV and text mode or 
Text mode.
• You cannot operate menus when viewing a teletext programme.
• If characters on a teletext programme do not appear properly, 
change the TELETEXT LANGUAGE setting. For details, see 
“TELETEXT LANGUAGE” on page 23.
Using the List Mode
You can store the numbers of your favourite teletext pages in memory 
and call them up quickly using the colour buttons.
„To store the page numbers:
1 Press M button to go into the List mode
The page numbers you have stored are displayed at the bottom of 
the screen.
2 Press a colour button to choose a position. Then press 
the number buttons to enter the page number
3 Press and hold down the A (Store) button
The four page numbers blink white to show that they are stored in 
memory.
„To call up a stored page:
1 Press the M button to enter the List mode
2 Press a colour button having a stored page
To exit the List mode:
Press the M button again.
Hold
You can hold a teletext page on the screen for as long as you want, 
even while several other teletext pages are being received.
Press the C (Hold) button
To cancel the Hold function:
Press C (Hold) button again.
Sub-page
Some teletext pages include sub-pages that are automatically 
displayed.
1 Choose a teletext page that includes sub-pages
Sub-page numbers that can be viewed are automatically displayed 
at the top of the screen.
2 Press the 5 buttons to choose a sub-page number
Reveal
Some teletext pages include hidden text (such as answers to a quiz).
You can display the hidden text.
Each time you press the E (Reveal) button, text is hidden 
or revealed
Size
You can double the height of the teletext display.
Press the F (Size) button
Index
You can return to the index page instantly.
Press the G (Index) button
Returns to page 100 or a previously specified page.
Cancel
You can search for a teletext page while watching TV.
1 Press the number button to enter a page number, or 
press a colour button
The TV searches for a teletext page.
2 Press H (Cancel) button
The TV programme appears. When the TV finds the teletext page, 
its page number appears in the upper left of the screen.
3 Press H (Cancel) button to return to a teletext page 
when the page number is on the screen
• The TV mode cannot be resumed by pressing the H (Cancel) 
button. To return to the TV mode press the 4 or 
b button.
VCR/TV/
DVD
TEXT ---TEXT ---TEXT ---TEXT ---
TV mode
TV and text mode
Text mode
Hold indication
HD-Z70&56RX5_Eng.book  Page 13  Tuesday, October 11, 2005  9:17 PM
 
						

							LT-Z70/56RX5 / LCT1911-001A / English
14
ENGLISH
Using the TV’s menu
This TV has a number of functions you can operate using menus. To 
use all your TV’s functions, you need to understand the basic menu 
operating techniques fully.
Operation with the buttons on the TV
You can also operate the menus using the buttons on the TV.
Basic operation
1 Press the H button to display the menu bar
2 Press the 5 buttons to choose the menu you want to 
use and then press the a button
3 Press the 6 buttons to choose the item to be set, 
press the 5 buttons to set the item, and then press 
the a button
If there are sub-menus, use the 7 buttons to operate them.
•Press the b button to return to the previous menu.
•Press the 4 or H button to exit from the menu.
• Some menu items may not be operated or set depending on the 
TV status, input signal or other menu item settings.
Menu items that cannot be operated or set are displayed in grey 
in the menu and cannot be chosen.
Types of menu
• The menu will disappear after about one minute if no operation 
is performed.
The menu guide area can be made to appear and disappear for some 
menus.
While the menu is displayed, press the 5 button to change 
between the guide area being displayed and not displayed.
• The guide area for some menus will still be displayed even if the 
5 button is pressed. This is not a fault.
VOLUME
IN (VIDEO-4)
CHANNEL
+
-
MENU/OK
OVER S-VIDEO
VIDEO
L/MONO
R
AUDIO
TV/VIDEO
6 buttons
MENU/OK button TV/VIDEO button
5 buttons
PICTURE menu
Choose to set the screen settings.
SOUND menu
Choose to set the sound settings.
FEATURES menu
Choose to set the sleep timer and child lock settings.
SET UP menu
Choose to edit the channels or set the display language 
settings.
PICTURE
PICTURE
Chosen 
menu name Chosen 
menu
>>
OK
PANORAMIC
4:3 AUTO ASPECT
REGULAR
14:9 ZOOM
>>
PANORAMIC
4:3 AUTO ASPECT
REGULAR
14:9 ZOOM
Guide area
HD-Z70&56RX5_Eng.book  Page 14  Tuesday, October 11, 2005  9:17 PM
 
						

							LT-Z70/56RX5 / LCT1911-001A / English
15
ENGLISH
PICTURE menu
• While the PICTURE menu is displayed, pressing the blue button 
will set the CONTRAST, BRIGHT, SHARP, COLOUR, TINT 
settings to their default settings.
• When watching the picture from VIDEO-1 to VIDEO-5 (HDMI) 
or the PC, picture effect settings can be memorised for each 
external input by setting the picture effects in the PICTURE menu.
The following items in the PICTURE menu are memorised.
PICTURE MODE
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
WHITE BALANCE
DIGITAL VNR
COLOUR SYSTEM
The last setting made for each item is memorised.
PICTURE MODE
You can choose one of three PICTURE MODEs to adjust the picture 
settings automatically.
BRIGHT:
Heightens contrast and sharpness.
STANDARD:
Standardises picture adjustment.
SOFT:
Softens contrast and sharpness.
CONTRAST
You can adjust the picture contrast.
2 :lower
3 : higher
BRIGHT
You can adjust the picture brightness.
2 : darker
3 : brighter
SHARP
You can adjust the picture sharpness.
2 : softer
3 :sharper
COLOUR
You can adjust the picture colour.
2 : lighter
3 : deeper
TINT
You can adjust the picture tint.
2 :reddish
3 :greenish
• You can change the TINT setting (picture hue) when the colour 
system is NTSC 3.58, or NTSC 4.43.
WHITE BALANCE
You can select one of three WHITE BALANCE modes (three tones 
of white) to adjust the white balance of the picture. Since white is the 
colour which is used as a reference for all the other colours, changing 
the WHITE BALANCE mode affects the appearance of all the other 
colours on the screen.
COOL:
A bluish white. Using this mode when watching bright pictures 
allows you to enjoy a more vivid and bright picture.
MID:
The normal white colour.
WARM:
A reddish white. Using this mode when watching films allows you to 
enjoy colours that are characteristic of films.
PICTURE MODE
COOL STANDARD PICTURE
OKRESET
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
WHITE BALANCE
FEATURES
HD-Z70&56RX5_Eng.book  Page 15  Tuesday, October 11, 2005  9:17 PM
 
						

							16
PICTURE menu
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
FEATURES
Choose FEATURES and press the a or 3 button to display the sub-
menu.
„DIGITAL VNR
The DIGITAL VNR function cuts down the amount of ‘noise’ 
(‘snow’ or interference) in the original picture.
You can choose from the three DIGITAL VNR function settings of 
AUTO, MIN and MAX.
AUTO(LOW)/AUTO(HIGH):
The TV will automatically adjust the level of the DIGITAL VNR 
effect to match the amount of noise in the picture, giving you the best 
possible picture.
• If you set the DIGITAL VNR effect too high it can make the picture 
less sharp. It is recommended you use the AUTO(LOW) setting if 
you can. If you set the DIGITAL VNR function to AUTO(LOW) 
but still notice some noise, change the setting from AUTO(LOW) to 
AUTO(HIGH).
MIN:
The level of the DIGITAL VNR effect is set to the minimum. If you 
set the DIGITAL VNR function to AUTO(LOW) but feel that the 
sharpness of the original picture has not been reproduced fully, 
change the setting from AUTO(LOW) to MIN.
• The MIN setting is not suitable for low-quality pictures which 
contain a lot of noise.
MAX:
The level of the DIGITAL VNR effect is set to the maximum. If you 
set the DIGITAL VNR function to AUTO(HIGH) but still notice 
some noise, change the setting from AUTO(HIGH) to MAX.
• The MAX setting is not suitable for high-quality pictures which 
contain very little noise.
„Super DigiPure
The Super DigiPure function uses the latest in digital technology to 
give you a natural-looking picture. The Super DigiPure function 
includes the following two functions.
DigiPure function:
This function helps to create a natural-looking picture by eliminating 
unnecessary edges from high-contrast and crisp images. For images 
with low-contrast, edges are added to produce a sharper, more 
detailed picture.
You can choose from the three DigiPure function settings of AUTO, 
MIN and MAX.
• If you set the DigiPure effect too high on a low-quality picture that 
contains a lot of noise, this may actually make the noise worse. We 
recommend you use the AUTO setting if you can.Picture motion compensation function:
This function displays fast-moving pictures (for example, the players 
or ball in a football game) more smoothly and naturally on the screen.
• The effect level of the picture motion compensation function 
cannot be changed. The effect level is the same no matter which of 
the AUTO, MIN or MAX settings is used.
AUTO:
The TV will automatically adjust the level of the DigiPure effect to 
match the amount of noise in the picture, giving the best possible 
picture.
MIN:
The level of DigiPure effect is set to the minimum. When you set the 
Super DigiPure function to AUTO and notice some noise, change the 
setting from AUTO to MIN.
• The MIN setting is not suitable for high-quality pictures which 
contain very little noise.
MAX:
The level of DigiPure effect is set to the maximum. If you set the 
Super DigiPure function to AUTO but feel that the original picture 
quality has not been reproduced fully, change the setting from AUTO 
to MAX.
• The MAX setting is not suitable for low-quality pictures which 
contain a lot of noise.
OFF:
The Super DigiPure function is turned off.
„PULL DOWN
The PULL DOWN function displays a cinema film picture more 
smoothly and naturally on the screen.
AUTO:
The television automatically recognises the type of signal and turns 
the function on and off.
ON:
This function is turned on.
OFF:
This function is turned off.
„COLOUR MANAGEMENT
This TV supports the COLOUR MANAGEMENT function to ensure 
dull colours are compensated to produce natural hues.
The COLOUR MANAGEMENT function is on by default.
ON:
COLOUR MANAGEMENT function is turned on.
OFF:
COLOUR MANAGEMENT function is turned off.
• Set this function to ON under normal conditions.
„PICTURE MANAGEMENT
The PICTURE MANAGEMENT function makes it easier to see the 
dark areas when a picture has many dark areas, and makes it easier to 
see the bright areas when a picture has many bright areas.
Normally use with this function on.
ON:
PICTURE MANAGEMENT function is turned on.
OFF:
PICTURE MANAGEMENT function is turned off.
„SMART PICTURE
The SMART PICTURE function detects the APL (Average Picture 
Level) and adjusts the contrast suitable for what you are watching.
Normally use with this function on.
ON:
SMART PICTURE function is turned on.
OFF:
SMART PICTURE function is turned off.
• When you have selected “BRIGHT” in the “PICTURE MODE,” 
SMART PICTURE function is fixed to “OFF.”
DIGITAL VNR
Super DigiPureAUTO(LOW) >
ON
OK
FEATURES
PULL DOWN
COLOUR MANAGEMENT
PICTURE MANAGEMENT
COLOUR SYSTEM
4:3 AUTO ASPECTAUTO
AUTO
ON
SMART PICTUREON
HD-Z70&56RX5_Eng.book  Page 16  Tuesday, October 11, 2005  9:17 PM
 
						

							PICTURE menu
17
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
„COLOUR SYSTEM
The colour system is chosen automatically. However, if the picture is 
not clear or no colour appears, choose the colour system manually.
1 Choose COLOUR SYSTEM. Then press the a or 3 
button
The sub-menu of the COLOUR SYSTEM function appears.
2 Press the 5 buttons to choose MAIN or SUB
MAIN:
You can change the colour system of the main-picture.
SUB:
You can change the colour system of the sub-picture.
• Choose MAIN when a sub-picture is not displayed.
3 Press the 6 buttons to choose the appropriate colour 
system. Then press the a button
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input signal.
• The AUTO function may not function properly if you have poor 
signal quality. If the picture is abnormal in the AUTO function, 
choose another colour system manually.
For colour system in your country or region, refer to the 
table below:
„4:3 AUTO ASPECT
You can choose one of three ZOOM modes, REGULAR, 
PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal 
picture (4:3 aspect ratio).
1 Choose 4:3 AUTO ASPECT then press the a button
2 Press the 6 buttons to choose a ZOOM mode
Area Country or Region System
Asia, 
Middle 
East Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, 
Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc. PAL
China, Vietnam, etc.  PAL
Hong Kong, etc. PAL
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM
Philippines, Taiwan, Myanmar, etc. NTSC
EuropeRussia, etc. SECAM
Czech Republic, Poland, etc. PAL
Germany, Holland, Belgium, etc. PAL
UK, etc. PAL
Oceania Australia, New Zealand, etc. PAL
AfricaRepublic of South Africa, etc. PAL
Nigeria, etc. PAL
Egypt, Morocco, etc. SECAM
>>
MAIN SUB
PALAUTO
OK
COLOUR SYSTEM
>>
OK
PANORAMIC
4:3 AUTO ASPECT
REGULAR
14:9 ZOOM
HD-Z70&56RX5_Eng.book  Page 17  Tuesday, October 11, 2005  9:17 PM
 
						

							LT-Z70/56RX5 / LCT1911-001A / English
18
ENGLISH
SOUND menu
• When the headphones are connected, only “STEREO / I • II” can 
be used.
STEREO / I • II
When you are viewing a bilingual broadcast programme, you can 
choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
MONO:
Cancels the Multi Sound function and the sound becomes monaural.
• If stereo sound or bilingual sound is hard to hear, please select 
MONO so that you can hear the broadcast more clearly.
• The sound mode you can choose differs depending on the TV 
programme.
• This function does not work in the VIDEO modes.
BASS
You can adjust the low tone of the sound.
2 : weaker
3 :strong
TREBLE
You can adjust the high tone of the sound.
2 : weaker
3 :strong
BALANCE
You can adjust the volume balance between the left and right speaker.
2 : turn the left speaker’s volume level up.
3 : turn the right speaker’s volume level up.
CINEMA SURROUND
You can enjoy Surround sound with a “live” effect by using the 
CINEMA SURROUND function.
• You can choose a CINEMA SURROUND mode from HIGH, 
LOW, MONO and OFF modes. For details, see “CINEMA 
SURROUND function” on page 10.
• You can also operate the CINEMA SURROUND function with 
the 2 button. For details, see “CINEMA SURROUND 
function” on page 10.
BBE
BBE function restores clarity and presence for better speech 
intelligibility and musical realism.
ON:
This function is turned on.
OFF:
This function is turned off.
• Manufactured under license from BBE Sound, Inc. Licensed by 
BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE 
and BBE symbol are registered trademarks of BBE Sound, Inc.
s: Stereo sound
v: mono sound
t: Bilingual I (sub I)
u: Bilingual II (sub II)
SOUND
OK
STEREO/
BASS
TREBLE
BALANCE
CINEMA SURROUND
BBEOFF
OFF
HD-Z70&56RX5_Eng.book  Page 18  Tuesday, October 11, 2005  9:17 PM