JVC Gzmc500 Owners Manual

(No.YF100)1-31 Fig.FA5-3
Fig.FA6 Fig.FA7-1
a : ANALOG
     BOARD ASSY
(10Pin BLACK WIRE)
d : LCD-SUB BOARD ASSY  
     (30Pin WIRE)b : ANALOG BOARD ASSY
(27Pin BROWN WIRE) L6
[6]
CF BOARD ASSY 30Pin RED WIRE is
between CF ASSY BKT 
and GRIP BASE
c : CF BOARD ASSY 
(20Pin WIRE) h : DIGITAL,CDS
BOARD ASSY
(11Pin WIRE)
YELLOW WIREd c
DRAWING FOR WIRE ARRANGEMENT
CF BOARD ASSY
(27Pin GREEN WIRE) d : ANALOG BOARD ASSY
     (30Pin RED WIRE)
CF BOARD ASSY
(27Pin RED WIRE) g : OPE2 f : CF SW BOARD ASSY WIRE...

1-32 (No.YF100)Fig.FA7-2
Fig.FA8
TO CF
(25Pin GREEN WIRE)TO CF
(25Pin RED WIRE)
TO ANALOG
(27Pin BROWN WIRE)
TO ANALOG
(10Pin BLACK WIRE) TO DIGITAL
(11Pin WIRE)
TO LCD-SUB
(30Pin WIRE)
RED YELLOW
DRAWING FOR WIRE ARRANGEMENT

[9]
NOTE9
[10]
29
(S9)
30
(S9)31
(S9) 

(No.YF100)1-33 3.2.3 ASSEMBLY of [9]MONITOR ASSEMBLY
zDisassembly procedure
NOTE1a:
During the procedure, be careful not to damage the parts. 
NOTE1b:
When removing, be careful not to cut or break the wire.
NOTE3:
When attaching, be careful with the SHIELD(MONI). 
NOTE4a:
When attaching, be careful with the FPC.
NOTE4b:
When removing, peel off the SPACER and lift the FPC to
make space. 
NOTE4c:
When removing, be careful not to cut or break the wire.
NOTE4d:
Remove the LCD MODULE with the LCD-SUB BOARD...

1-34 (No.YF100)Fig.MO3-1
Fig.MO3-2Fig.MO3-3
Fig.MO3-4
10
(S4a)11
(S4a)NOTE4a
NOTE4b,d
[4]
BRACKET(LCD)
SPACER LCD SUB
BOARD ASSY
FPC
[4]
BRACKET
(LCD) 
REAR UNIT SPACER13
(S4b)
12
(S4a) FPC14
(S4b)
15
(S4b)
0.078Nnm(0.8kgfncm)
NOTE4b,f NOTE4d,e
NOTE4c
WIRE
(PINK)WIRE
(WHITE)
WIRE
(PINK)
SD4a
SD4bWIRE
(WHITE)  
LCD-SUB BOARD ASSY 
NOTE4e
B.LIGHT(-)
B.LIGHT(+)CN4
WIRE

SPACER
NOTE4e 

(No.YF100)1-35 3.2.4 ASSEMBLY of [10]CAMERA ASSEMBLY AND OP FRAME ASSEMBLY
zDisassembly procedure
NOTE1:
When removing, be careful not to damage the CONNEC-
TOR or cut/break the WIRE.
NOTE2a:
When removing the screw No.5,6, leave the COVER(POW)
open.
NOTE2b:
Remove the SD Card prior to other removing procedure.
NOTE4:
When attaching, be careful with the wiring.
NOTE5:
When attaching, be careful with the position of the FPC.
NOTE6a:
Be careful with an electric shock.
NOTE6b:
Replace the entire STROBE UNIT...

1-36 (No.YF100)Fig.C2
Fig.C3Fig.C4-1
Fig.C4-2
5
(S2) 5
(S2)
6
(S2)7
(S2)
8
(S2)
9
(S2)
6
(S2)
[2]
NOTE2b
NOTE2b NOTE2a
COVER(SD) BOTTOM VIEWCOVER(POW)

10
(S3)10
(S3)
11
(S4)11
(S4)
[3]
CN4bCN4a CN4cCN4d
[4]
SPK WIRE MIC
WIRESPK WIRE
NOTE4
FPC FPC 12
(S5)13
(S5)14
(S5)15
(S5)
[5]
NOTE5
L5aL5b
SPACER 

(No.YF100)1-37 Fig.C4-3
Fig.C5 Fig.C6
NOTE6a
[6]
NOTE6b
UPPER CASE
(OP) ASSY
[7]
PLATE
(SPK)
PLATE
(3CCD)16
(S6)
17
(S6)18
(S6)19
(S6)20
(S6)
18
(S6)19
(S6)
20
(S6) 21
(S7)22
(S7)
23
(S8) 24
(S8)
NOTE8a
NOTE8b
NOTE7

[8]
COVER
(MIC)  
FRONT
SIDE
It passes between ribs. 
It passes between ribs. 
It passes between ribs. 

SPK WIRE SPK WIRE SPACER
CN9c
CN9c CN9aCN9b
25
(S9)
[9]
NOTE9
CDS
BOARD
ASSY
11pin
WIRE7pin WIRE
NOTE10
CN10aCN10b 26
(S10)
27
(S10)
[10][11] 

1-38 (No.YF100) 3.2.5 DISASSEMBLY of [11] OP BLOCK ASSY/CCD BOARD ASSY
zCAUTIONS
(1) Since the OP BLOCK on this model is more complicated
in structure than previous OP BLOCKS, pay extra
attention to external shocks and vibrations.
(2) During the procedure, be careful in handling the CCD
IMAGE SENSOR, OP LPF and the LENS etc. Pay extra
attention to the soil, dust and scratch on the surface.
If fingerprints are left on the screen, wipe them with clean
chamois leather or a cleaning cloth.
zDisassembly...

(No.YF100)1-39 Fig.OP3
Fig.OP4
OP FRAME ASSY GASCKET
6
(S11c)
7
(S11c)8
(S11c)
NOTE11c
0.118Nnm(1.2kgfncm)
CCD BOARD ASSY
NOTE11e
NOTE11d NOTE11d
9
(S11d)
10
(S11d) HEAT SINK(CCD)
HEAT SHEET
SD11a
GASCKET HEAT SINK
(CCD)HEAT SHEET
0.5mm
or less
HEAT SINK point is
put together on here. 
0.088Nnm(0.9kgfncm) 0.078Nnm(0.8kgfncm)
NOTE11h,j NOTE11f,g
NOTE11f,g
AUTO IRIS UNITSENSOR
12
(S11e)
13
(S11e)14
(S11f)15
(S11f) 16
(S11f)17
(S11f)
18
(S11g) 19
(S11h)20
(S11h) 11
(S11e)OP BLOCK ASSY
FORCUS MOTOR...

1-40 (No.YF100)
SECTION 4
ADJUSTMENT
4.1 PREPARATION
4.1.1 Precaution
Camera system and deck system of this model are specially
adjusted by using PC. 
However, if parts such as the following are replaced, an
adjustment is required. The adjustment must be performed in a
Service Center equipped with the concerned facilities.
• OP BLOCK ASSEMBLY
• MONITOR ASSEMBLY
• EEP ROM (IC4504 of  DIGITAL board)
In the event of malfunction with electrical circuits, first find a
defective portion with the aid of proper...