JVC Gzmc500 Owners Manual

(No.YF100)1-11 The above data shows: the elapsed time of copying the recorded
information on a Microdrive to a PC and the elapsed time of for-
matting the Microdrive with the PC. 
From the results of the measurement, it is clear that the data
transfer with a commercial USB2.0 Reader/ Writer is about twice
as quick as transfer with a PCMCIA card.  
Using USB2.0 Reader/ Writer is recommended when frequent
data backup or data re-writing on the Microdrive is required.
Backup should be performed all the...

1-12 (No.YF100) 2.4.5.4 Operation failures caused by main unit failures
2.4.5.3 Judging from the separation of the main unit and MD, the
operation failure is more likely to be caused by the main unit fail-
ure. However, the main unit failure has not been determined yet,
as there is a possibility of the user MD failure causing the main
unit damage. The following procedure shows how to determine
the main unit failure.2.4.5.5 Disabled read/ write with other devices
When read/ write cannot be done with the...

(No.YF100)1-13 NOTE1:
Norton SystemWorks 2005 (Latest version on 2005/ 7)
It is Symantecs data recovery software.
For system requirements and other details, please check their
web site.http://www.symantec.com/region/jp/products/
NOTE2:
Final Data 3.0 Premium Office  (Latest version on 2005/7)
It is AOS Technologies data recovery software. 
Although there are some kinds of recovery software as FINAL-
DATA series from this company, this is the cheapest one that
can recover MPEG2.
For system requirements...

1-14 (No.YF100)There is another type of Microdrive with red label.
These Microdrives have been shipped since April, 2005 and
they will be replacing the Microdrives (P/N: 13G1764) in the
previous page.
When 6GB Microdrive was developed, the data transfer speed
and the areal density were improved. The improvement was
also applied to 4 GB Microdrive.
For the convenience sake, define the Microdrive with P/N:
13G1764 as an old type and the Microdrive with P/N: 0A40243
as a new type.
These Microdrives...

(No.YF100)1-15 (Refer to 5.2.3 Image quality and support media.)
Recording movies in Microdrive setting is recommended.
2.4.7.2 Movies
Folder names and file names of moving images are created within
EVERIO, compliant to the SD-VIDEO standard 1.1(NOTE).
NOTE:
SD-Video standard
SD-Video standard is a standard for SD Memory Card format
of recording moving images established by SD Card
Association.It is used when recording moving images on SD
Memory Cards with mobile devices such as digital video
cameras.
As...

1-16 (No.YF100)media but to a different card (e.g. from one Microdrive to
another Microdrive), the maximum file number recorded
in EVERIO is one. The recording will be continued from
that number in sequential numbers.
e.g. If a SD Card is changed to another SD Card after
shooting from 0001 to 0100, the recording will be started
on the newly inserted SD Card in sequential numbers
from 0101.
Pictures are recorded as JPEG compression picture Exif2..2,
DCF2.0, PictBridge, DPOF standard conformity. There is...

(No.YF100)1-17 There is an issue of handling the recorded information of the us-
ers after backup. There is another matter of increasing backup
time regarding mass storage media. The new software HiTest is
introduced to countermeasure these matters. 
The failure detection capability goes down as there is no writing
test. However, our examination shows that the detection accura-
cy is not influenced by the lack of writing test as most Microdrives
which have detected errors in writing test also have errors...

1-18 (No.YF100)(3) Choose a destination folder, then press the Next but-
ton.
(4) Press the Next button to proceed with the installation.
(5) When Installation Complete is displayed, press the
Close button to finish the installation.(6) Check whether the HiTest icon is on the desktop.
4. Preparation for start up
(1) Double click the HiTest icon on the desktop to start the
software.
(2) The User Information window is displayed.
(3) Input the information of the person who carries out the
test, then press...

(No.YF100)1-19 (4) When the Country and City window opens, input JAPAN
in Customer Country, then press the Add button.
Input your base city in Customer City, then press the
Add button.
Once these items have been input, they can be selected
by pressing the pull down buttons next to input columns
from the next time.
If any input error is made, it can be deleted by pressing
the Delete button.
(5) Although the Login window is displayed, press the Ex-
it button as it is not used now.
(6) Insert the Microdrive...

1-20 (No.YF100) 6. How to use HiTest
6.1  Test preparation
(1) Write down the serial number and the P/N (Part Num-
ber) displayed on the back of the Microdrive which is
to be tested.
(NOTE)
When writing down the serial number and the P/N,
check the Water Exposure Seal and any external
damages. If there is any abnormality, finish without
carrying out the test. 
(2) Insert the PCMCIA adaptor which is attached with Mi-
crodrive into the PCMCIA card slot on the PC.
(3) Double click the HiTest icon on the...