JVC Gze205 User Manual

Playing a Video with Defective Management Information
The management information of a video may be damaged if recording is not
performed correctly, such as turning off the power in the middle of recording. You can perform the following operations to play back the videos with
defective management information.
1 Open the LCD monitor.
.
0Check if the recording mode is  A.
0 If the mode is  B still image, tap  B on the recording screen to display
the mode switching screen.
Tap  A to switch the mode to video....

Operation Buttons for Still Image Playback
During Index Screen Display
.
DisplayDescriptionAVideo/Still Image
ModeSwitches between video and still image
modes.BDateMoves to the previous/next dateCDisplays the next index screen (thumbnail display)
0 You can perform the same operation with the
zoom lever.EFile (Still Image)Tap on thumbnail - Starts playback
Drag to right - Scrolls to the right to show the
previous index screen (thumbnail display)
Drag to left - Scrolls to the left to show the next index...

Slideshow Playback
Still images can be played back in a slideshow.
Tap  I during still image playback to start the slideshow.
.
“Operation Buttons for Still Image Playback” ( A p. 62)
Memo : 
0
Effects can be added to the transitions in slideshow playback.
“ SLIDE SHOW EFFECTS ” ( A p. 106)Searching for a Specific Video/Still Image by
Date
When there is a large number of recorded videos and still images, it is difficult
to look for the desired file from the index screen.
Use the search function to find...

Connecting to and Viewing on TV
You can connect this unit to a TV for playback. The image quality on TV
varies with the type of TV and the connecting cable. Select the connector
that best suits your TV.
0 Refer also to the instruction manual of the TV in use.
“Connecting via the HDMI Mini Connector” ( A p. 64)
“Connecting via the AV Connector” ( A p. 65)
0 To display the date and time on TV, set both “DISPLAY DATE/TIME” and
“DISPLAY ON TV” to “ON”.
“ DISPLAY DATE/TIME ” ( A p. 103)
“ DISPLAY ON TV ” ( A...

Operating in Conjunction with TV via HDMI
Connecting this unit to an HDMI-CEC enabled TV using the HDMI mini cableallows linked operations with the TV to be performed.
0 HDMI-CEC (Consumer Electronics Control) is an industry standard that
enables interoperability between HDMI-CEC compliant devices that are
connected via HDMI cables.
Memo : 
0 Not all HDMI control devices comply with the HDMI-CEC standard. The
HDMI control function of this unit will not work when connected to these
devices.
0 This unit is...

Playing Back Playlists
Plays back the playlists that you have created.1 Open the LCD monitor.
.
0Check if the recording mode is  A.
0 If the mode is  B still image, tap  B on the recording screen to display
the mode switching screen.
Tap  A to switch the mode to video. (You can also use the  A/B  button
on this unit.)
2 Tap “

Deleting Unwanted Files
Delete unwanted videos and still images when the space in the recording
media is running out.
Doing so frees up more space in the recording media. “Deleting the Currently Displayed File” ( A p. 67)
“Deleting Selected Files” ( A p. 67)Memo : 
0
Deleted files cannot be restored.
0 When files in a playlist are deleted, the playlist changes.
0 Files that are protected cannot be deleted.
Release protection before deleting the file.
“Protecting Files” ( A p. 68)
0 Be sure to back up...

0
.
5Tap “SET”.
.
6Tap “EXECUTE” to confirm the deletion.
.
0After deleting is complete, tap “OK”.
0 To cancel the deletion, tap “QUIT”.
Protecting Files
Prevent important videos/still images from being deleted accidently by
protecting them.
“Protecting/Releasing Protection of the Currently Displayed File” ( A  p. 68)
“Protecting/Releasing Protection of Selected Files” ( A p. 69)Caution : 
0
When the recording media is formatted, even the protected files will be
deleted.
Protecting/Releasing Protection...

Protecting/Releasing Protection of Selected Files
Protects or releases protection of the selected files.
1Open the LCD monitor.
.
0Tap  A or  B to select the video or still image mode.
0 Tap  B or  A on the recording screen to display the mode switching
screen.
Tap  A to switch to the video mode  A.
Tap  B to switch to the still image mode  B.
(You can also use the  A/B  button on this unit.)
2 Tap “

Capturing a Still Image in the Video DuringPlayback
You can capture still images of the scenes you like in the recorded videos.1 Open the LCD monitor.
.
0Check if the recording mode is  A.
0 If the mode is  B still image, tap  B on the recording screen to display
the mode switching screen.
Tap  A to switch the mode to video. (You can also use the  A/B  button
on this unit.)
2 Tap “