JVC Gze205 User Manual

							Playing a Video with Defective Management Information
The management information of a video may be damaged if recording is not
performed correctly, such as turning off the power in the middle of recording. You can perform the following operations to play back the videos with
defective management information.
1 Open the LCD monitor.
.
0Check if the recording mode is  A.
0 If the mode is  B still image, tap  B on the recording screen to display
the mode switching screen.
Tap  A to switch the mode to video. (You can also use the  A/B  button
on this unit.)
2 Tap “
						

							Operation Buttons for Still Image Playback
During Index Screen Display
.
DisplayDescriptionAVideo/Still Image
ModeSwitches between video and still image
modes.BDateMoves to the previous/next dateCDisplays the next index screen (thumbnail display)
0 You can perform the same operation with the
zoom lever.EFile (Still Image)Tap on thumbnail - Starts playback
Drag to right - Scrolls to the right to show the
previous index screen (thumbnail display)
Drag to left - Scrolls to the left to show the next index screen (thumbnail display)F
						

							Slideshow Playback
Still images can be played back in a slideshow.
Tap  I during still image playback to start the slideshow.
.
“Operation Buttons for Still Image Playback” ( A p. 62)
Memo : 
0
Effects can be added to the transitions in slideshow playback.
“ SLIDE SHOW EFFECTS ” ( A p. 106)Searching for a Specific Video/Still Image by
Date
When there is a large number of recorded videos and still images, it is difficult
to look for the desired file from the index screen.
Use the search function to find the file you want. You can search and play videos or still images according to recording dates.1 Tap “MENU”.
.
0Searching can be performed in both the video and still image modes.
*The image shows the video mode.
2 Tap “SEARCH DATE”.
.
3Tap a recording date, then tap “NEXT”.
.
0Tap again to cancel the selected date.
4 Tap on the file to start playback.
.
0You can select videos in the video mode and still images in the still
image mode.
0 Only the files recorded on the selected date are displayed.
0 Tap  L to stop searching and return to the index screen (thumbnail
display).
Deleting Files of a Selected Date ：Tap A on the index screen (thumbnail display) to delete unwanted files.
“Deleting Unwanted Files” ( A p. 67)Playback63 
						

							Connecting to and Viewing on TV
You can connect this unit to a TV for playback. The image quality on TV
varies with the type of TV and the connecting cable. Select the connector
that best suits your TV.
0 Refer also to the instruction manual of the TV in use.
“Connecting via the HDMI Mini Connector” ( A p. 64)
“Connecting via the AV Connector” ( A p. 65)
0 To display the date and time on TV, set both “DISPLAY DATE/TIME” and
“DISPLAY ON TV” to “ON”.
“ DISPLAY DATE/TIME ” ( A p. 103)
“ DISPLAY ON TV ” ( A p. 113)
Unnatural Displays on TVTroubleActionImages do not
appear on the TV
properly.0 Disconnect the cable and connect again.
0 Turn off and on this unit again.
0 Images may not appear properly when the
remaining battery power is low. Use an AC
adapter.Images are
projected vertically
on the TV.0 Set “VIDEO OUTPUT” in the “COMMON” menu
to “4:3”.
“ VIDEO OUTPUT ” ( A p. 114)Images are
projected
horizontally on the
TV.0 Adjust the TV's screen accordingly.The color of images
looks strange.0 Adjust the TV's screen accordingly.HDMI-CEC
functions do not
work properly, and
the TV does not
work in conjunction
with this unit.0 TVs may operate differently depending on the
specifications, even if they are HDMI-CEC
compliant. Therefore, the HDMI-CEC functions
of this unit cannot be guaranteed to operate in
combination with all the TVs. In such cases, set
“HDMI CONTROL” to “OFF”.
“ HDMI CONTROL ” ( A p. 115)The language on
the display
changed.0 It may occur when you connect this unit to a TV
with different language setting using an HDMI
mini cable.Caution : 
0 Do not remove the recording medium or perform any other operation (such
as turning off the power) while accessing files. Also, be sure to use the
provided AC adapter, as the data on the recording medium may be
corrupted if the battery becomes exhausted during operation. If the data on the recording medium becomes corrupted, format the recording
medium to use the medium again.
Connecting via the HDMI Mini Connector
If you are using an HDTV, you can play back in HD quality by connecting to the HDMI mini connector.
0 Use a High Speed HDMI mini cable as the HDMI mini cable when not using
the provided one.
0 Refer also to the instruction manual of the TV in use.
1
Connect to a TV.
.
0Turn off the camcorder by pressing the  M button for about 2 seconds.
2 Connect the AC adapter to this unit.
.
3Press the external input button on the TV to switch to the input from this
unit via the connected connector.
.
4Play back a file.
.
“Playing Back Videos” ( A p. 58)
“Playing Back Still Images” ( A p. 61)
Memo : 
0
Change the settings in “HDMI OUTPUT” according to the connection.
“ HDMI OUTPUT ” ( A p. 114)
0 When connected to the TV via the HDMI mini cable, images and sounds
may not be output properly depending on the TV connected.
In such cases, perform the following operations.
1) Disconnect the HDMI mini cable and connect it again.
2) Turn off and on this unit again.
0 For questions about the TV or method of connection, contact your TV's
manufacturer.Playback64 
						

							Operating in Conjunction with TV via HDMI
Connecting this unit to an HDMI-CEC enabled TV using the HDMI mini cableallows linked operations with the TV to be performed.
0 HDMI-CEC (Consumer Electronics Control) is an industry standard that
enables interoperability between HDMI-CEC compliant devices that are
connected via HDMI cables.
Memo : 
0 Not all HDMI control devices comply with the HDMI-CEC standard. The
HDMI control function of this unit will not work when connected to these
devices.
0 This unit is not guaranteed to operate with all HDMI-CEC enabled devices.
0 Depending on the specifications of each HDMI-CEC enabled device,
some functions may not work with this unit. (For details, refer to the
instruction manual of your TV.)
0 Unintended operations may occur with some connected devices. In these
cases, set “HDMI CONTROL” to “OFF”.
“ HDMI CONTROL ” ( A p. 115)
Preparations
0
Connect an HDMI mini cable between this unit and the TV.
“Connecting via the HDMI Mini Connector” ( A p. 64)
0 Turn on the TV and set the HDMI-CEC related setting to “ON”. (For details,
refer to the instruction manual of the TV.)
0 Turn on this unit and set “HDMI CONTROL” in the “COMMON” menu to
“ON”.
“ HDMI CONTROL ” ( A p. 115)
Operation Method 1
1 Turn on this unit.
2 Select the playback mode.
3 Connect the HDMI mini cable.
0 TV turns on automatically and switches to HDMI input mode when
this unit is turned on.
Operation Method 2
1 Turn off the TV.
0 This unit turns off automatically.Memo : 
0Depending on the TV connected, the display language of this unit will
automatically switch to the language that is selected for the TV when this
unit is turned on.
(This is applicable only if this unit supports the language selected for the
TV.) To use this unit with a language that differs from the display language of the TV, set “HDMI CONTROL” to “OFF”.
0 The display language of the TV will not switch automatically, even if the
display language of this unit is changed.
0 These functions may not work correctly when devices such as amplifier
and selector are connected. Set “HDMI CONTROL” to “OFF”.
0 If HDMI-CEC does not work properly, turn off and on this unit again.Connecting via the AV Connector
By connecting the supplied AV cable to the AV connector, videos can be
played back on a TV.
0 Refer also to the instruction manual of the TV in use.
1
Connect to a TV.
.
0Turn off the camcorder by pressing the  M button for about 2 seconds.
2 Connect the AC adapter to this unit.
.
3Press the external input button on the TV to switch to the input from this
unit via the connected connector.
.
4Play back a file.
.
“Playing Back Videos” ( A p. 58)
“Playing Back Still Images” ( A p. 61)
Memo : 
0
For questions about the TV or method of connection, contact your TV's
manufacturer.Playback65 
						

							Playing Back Playlists
Plays back the playlists that you have created.1 Open the LCD monitor.
.
0Check if the recording mode is  A.
0 If the mode is  B still image, tap  B on the recording screen to display
the mode switching screen.
Tap  A to switch the mode to video. (You can also use the  A/B  button
on this unit.)
2 Tap “
						

							Deleting Unwanted Files
Delete unwanted videos and still images when the space in the recording
media is running out.
Doing so frees up more space in the recording media. “Deleting the Currently Displayed File” ( A p. 67)
“Deleting Selected Files” ( A p. 67)Memo : 
0
Deleted files cannot be restored.
0 When files in a playlist are deleted, the playlist changes.
0 Files that are protected cannot be deleted.
Release protection before deleting the file.
“Protecting Files” ( A p. 68)
0 Be sure to back up important files on a computer.
“Backing Up All Files” ( A p. 81)
Deleting the Currently Displayed File
Deletes the currently displayed file.
Caution : 
0
Deleted files cannot be restored.
1
Tap  A.
.
0While the video mode is shown in the image, the same operations
apply for the still image mode.
2 Tap “YES”.
.
0Tap  h  / g  to select the previous or next file.
0 When no file remains, the screen returns to the index screen.
Deleting Selected Files
Deletes the selected files.
Caution : 
0Deleted files cannot be restored.
1
Open the LCD monitor.
.
0Tap  A or  B to select the video or still image mode.
0 Tap  B or  A on the recording screen to display the mode switching
screen.
Tap  A to switch to the video mode  A.
Tap  B to switch to the still image mode  B.
(You can also use the  A/B  button on this unit.)
2 Tap “
						

							0
.
5Tap “SET”.
.
6Tap “EXECUTE” to confirm the deletion.
.
0After deleting is complete, tap “OK”.
0 To cancel the deletion, tap “QUIT”.
Protecting Files
Prevent important videos/still images from being deleted accidently by
protecting them.
“Protecting/Releasing Protection of the Currently Displayed File” ( A  p. 68)
“Protecting/Releasing Protection of Selected Files” ( A p. 69)Caution : 
0
When the recording media is formatted, even the protected files will be
deleted.
Protecting/Releasing Protection of the Currently Displayed
File
Protects or releases protection of the currently displayed file.
1 Tap “MENU”.
.
2Tap “PROTECT/CANCEL”.
.
3Tap “YES”.
.
0Tap  h  / g  to select the previous or next file.
0 After setting, tap “OK”.
Editing68 
						

							Protecting/Releasing Protection of Selected Files
Protects or releases protection of the selected files.
1Open the LCD monitor.
.
0Tap  A or  B to select the video or still image mode.
0 Tap  B or  A on the recording screen to display the mode switching
screen.
Tap  A to switch to the video mode  A.
Tap  B to switch to the still image mode  B.
(You can also use the  A/B  button on this unit.)
2 Tap “
						

							Capturing a Still Image in the Video DuringPlayback
You can capture still images of the scenes you like in the recorded videos.1 Open the LCD monitor.
.
0Check if the recording mode is  A.
0 If the mode is  B still image, tap  B on the recording screen to display
the mode switching screen.
Tap  A to switch the mode to video. (You can also use the  A/B  button
on this unit.)
2 Tap “