JVC GZ-EX555 User Manual

							SettingDetailsVIDEO MAIL0VIDEO MAIL ADDRESS
Selects the recipient’s e-mail address for video mails.
“Sending Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL)” ( A p. 129)
0 MAIL SETTING
Sets the e-mail addresses of the sender and recipient.
“Setting the Sender’s E-mail Address of the Camera” ( A p. 146)
“Registering the Recipient’s E-mail Address of the Camera” ( A p. 148)COMMON Wi-Fi SETTINGConfigures various settings related to the network.
0 ACCESS POINTS
Adds, deletes, or perform LAN settings of access points (wireless LAN router).
“Registering the Access Points of the Camera to Connect (ACCESS POINTS)” ( A p. 151)
0 MAIL SETTING
Sets the e-mail addresses of the sender and recipient.
“Setting the Sender’s E-mail Address of the Camera” ( A p. 146)
“Registering the Recipient’s E-mail Address of the Camera” ( A p. 148)
0 MAC ADDRESS (Media Access Control address)
Displays the MAC address of the camera.
(The above shows the MAC address when connected to an access point, while the below shows the
address during direct connection.)
“Checking the MAC Address of this Camera” ( A p. 158)
0 SET FROM QR CODE
Perform the Wi-Fi setting after the camera reads the QR code generated by following the instruction in Detailed User Guide.
“Using Wi-Fi by Creating a QR Code (GZ-EX555/GZ-EX515)” ( A p. 183)
0 LOCK SETTINGS
Sets a password to prevent others from seeing the network settings.
“Protecting the Network Settings with a Password” ( A p. 158)
0 INITIALIZATION
Returns the network settings to their default values.
“Initializing the Wi-Fi Settings” ( A p. 159)Using Wi-Fi (GZ-EX555/GZ-EX515)141 
						

							Setting the Password (DIRECT MONITORING/INDOORMONITORING/OUTDOOR MONITORING)
Sets the password required to access the camera.
0 Up to 8 characters (alphabets, numbers and symbols only), case-
sensitive.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap “DIRECT MONITORING” ( N), “INDOOR MONITORING” ( O) or
“OUTDOOR MONITORING” ( M).
(Operation on this camera)
.
4Tap “PASSWORD”.
(Operation on this camera)
.
5Register a password.
(Operation on this camera)
.
0By default, the password is set to “0000”. (INDOOR MONITORING/
OUTDOOR MONITORING)
0 Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  E or  F to move one space to the left or right.
6 Tap “SET”.
(Operation on this camera)
0 Settings will not be saved until “SET” is tapped.Using Wi-Fi (GZ-EX555/GZ-EX515)142 
						

							Setting the Enforced Group Owner (DIRECT MONITORING)
Sets whether to enforce authorization of the group owner.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap the “DIRECT MONITORING” ( N) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
4Tap “ENFORCED GROUP OWNER”.
(Operation on this camera)
.
5Tap “ON” or “OFF”.
.
0It is recommended to select “ON” usually.
If connection to devices that support Wi-Fi Direct fails, set to “OFF”.
Memo : 
0 When set to “OFF”, connection to devices that do not support Wi-Fi Direct
will be disabled.Changing the HTTP Port (DIRECT MONITORING/INDOOR
MONITORING/OUTDOOR MONITORING)
Changes the port number to access to the camera.
Valid when setting up multiple cameras for Outdoor Monitoring.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap “DIRECT MONITORING” ( N), “INDOOR MONITORING” ( O) or
“OUTDOOR MONITORING” ( M).
(Operation on this camera)
.
4Tap “HTTP PORT”.
(Operation on this camera)
.
5Enter a port number.
(Operation on this camera)
Using Wi-Fi (GZ-EX555/GZ-EX515)143 
						

							Setting the UPnP of this Camera (OUTDOOR MONITORING)
Sets the UPnP of the camera.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap “OUTDOOR MONITORING” ( M).
(Operation on this camera)
.
4Tap “UPnP”.
(Operation on this camera)
.
5Tap “ON” or “OFF” to make a selection.
.
0Select “ON” to enable UPnP.
0 Select “OFF” to disable UPnP.
Obtaining a Dynamic DNS (DDNS) Account
By obtaining a dynamic DNS account, this unit may be used on the web as
usual even if the IP address changes when making an access to this unit via
internet.
0 Only the JVC dynamic DNS service can be set on this camera.
To obtain (register) an account, perform the following steps.
1 Access the following URL from a browser and register for an account.
(Operation on a computer or smartphone)
https://dd3.jvckenwood.com/user/ Set your e-mail address as the username.
2 Check that you have received a confirmation e-mail to the address used
in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)
3 Set the username and password used in registration on the camera.
(Operation on this camera)
“Setting Dynamic DNS on this Camera (OUTDOOR MONITORING)”
( A  p. 145)
4 Execute OUTDOOR MONITORING.
(Operation on this camera)
If “OUTDOOR MONITORING” is executed while dynamic DNS settings
are enabled, the camera will access the dynamic DNS server.
5 Tap “CAMERA NETWORK INFO.” to check that the URL (WAN) is
displayed.
(Registration complete)
“Image Monitoring via the Internet (OUTDOOR MONITORING)”
( A  p. 126)
Caution : 
0
Registration will be canceled if you do not access the dynamic DNS server
from the camera within 3 days.
Perform the registration again in this case.
0 Registration will not be complete if the username and password set on this
camera are incorrect. Be sure to check that they are correct.
0 Successful registration will be canceled too if you do not access the
dynamic DNS server for 1 year.
Using Wi-Fi (GZ-EX555/GZ-EX515)144 
						

							Setting Dynamic DNS on this Camera (OUTDOOR
MONITORING)
Sets the dynamic DNS information of the obtained account on the camera.
“Obtaining a Dynamic DNS (DDNS) Account” ( A p. 144)
1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap “OUTDOOR MONITORING” ( M).
(Operation on this camera)
.
4Tap “DDNS SETTING”.
(Operation on this camera)
.
5Tap “DDNS”, then tap “ON”.
(Operation on this camera)
6 Enter the DDNS settings (username/password).
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  E
 or  F
 to move one space to the left or right.
0 After setting, tap “SET”.
Memo : 
0
Only the JVC dynamic DNS service can be set on this camera.Using Wi-Fi (GZ-EX555/GZ-EX515)145 
						

							Setting the Sender’s E-mail Address of the Camera
Sets the address to be used for sending e-mails on the camera.
Memo : 
0By using Gmail as the sender’s mail address, some of the settings can be
omitted.
Use of Gmail is recommended for users who have a Gmail account.1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “MAIL SETTING”.
(Operation on this camera)
.
6Tap “SENDER'S EMAIL”.
(Operation on this camera)
.
7Tap “NEXT”.
(Operation on this camera)
.
0Tap “CHANGE” to change the contents that are already set.
0 Enter the e-mail address and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  E or  F to move one space to the left or right.
0 After setting, tap “SET”.
8 Tap “NEXT”.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0Tap “CHANGE” to change the contents that are already set.
0 Enter the SMTP server and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
Using Wi-Fi (GZ-EX555/GZ-EX515)146 
						

							0Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  E or  F to move one space to the left or right.
0 After setting, tap “SET”.
9 Tap “CHANGE” to change the SMTP port.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0Change the SMTP port number (if necessary) and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap  E or  F to move one space to the left or right.
0 After setting, tap “SET”.
10 Tap “CHANGE” to change the authentication.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0Tap the desired “AUTHENTICATE METHOD”.
.
11Tap “NEXT”.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0The following does not appear if “AUTHENTICATE METHOD” is set
to “NONE”.
0 Tap “CHANGE” to change the contents that are already set.
0
Enter the username and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  E
 or  F
 to move one space to the left or right.
0 After setting, tap “SET”.
12 Tap “NEXT”.
(Operation on this camera)
.
0The following does not appear if “AUTHENTICATE METHOD” is set
to “NONE”.
0 Tap “CHANGE” to change the contents that are already set.
0 Enter the password and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  E or  F to move one space to the left or right.
0 After setting, tap “SET”.
13 Tap “QUIT” or “SEND TEST EMAIL”.
(Operation on this camera)
.
SENDER'S EMAILEnter the sender’s e-mail address.SMTP SERVEREnter the SMTP server address.SMTP PORTSet this when the SMTP port number needs to be
changed.Using Wi-Fi (GZ-EX555/GZ-EX515)147 
						

							AUTHENTICATE
METHODSet this when the authentication method needs to
be changed.USERNAMEEnter the username.PASSWORDEnter the password.Caution : 
0 It is necessary to obtain an e-mail account in advance.
0 Some web-based mail addresses do not support this feature.
0 These are Gmail settings as of December 2012.
Perform setting manually if changes have been made to the Gmail
specifications.
0 To make use of addresses other than Gmail, please consult the mail
service provider (Internet provider, etc.) for information on the settings.
Registering the Recipient’s E-mail Address of the Camera
Registers the e-mail addresses of recipients on the camera.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap  1 on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “MAIL SETTING”.
(Operation on this camera)
.
6Tap “RECIPIENT'S EMAIL”.
(Operation on this camera)
Using Wi-Fi (GZ-EX555/GZ-EX515)148 
						

							.
7Tap “ADD”.
(Operation on this camera)
.
8Enter the recipient’s e-mail address.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  E or  F to move one space to the left or right.
0 After setting, tap “SET”.
9 After tapping “DETECT/MAIL” or “VIDEO MAIL” depending on the
function in use, tap “SET”.
.
0An icon ( P) appears after tapping “DETECT/MAIL”, and the
recipient’s e-mail address for the Detect/Mail.
0 An icon ( L) appears after tapping “VIDEO MAIL”, and the recipient’s
e-mail address for the VIDEO MAIL.
0 To cancel, press the icon one more time.
Memo : 
0
Up to 8 e-mail addresses can be registered as recipients.Caution : 
0When setting another person as the recipient, be sure to obtain his/her
consent in advance.
0 Check whether notifications indicating errors have been sent to the
sender’s e-mail address. (Make use of a computer or similar devices as it
is not possible to check from the camera.)
If no notifications are received: Refer to “Unable to send e-mails.” and adjust the settings accordingly.
If notifications are received: Check the content of the notification.*Note
Do not continue sending e-mails with the same settings if you receive error
notifications. Depending on the provider, you may be marked as a sender
of spam (junk mail).Using Wi-Fi (GZ-EX555/GZ-EX515)149 
						

							Setting the Detection Method of this Camera (DETECT/MAIL
SETTING)
Sets the detection method to start recording.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap “DETECT/MAIL” ( P).
(Operation on this camera)
.
4Tap “DETECTION METHOD”.
(Operation on this camera)
.
5Tap “MOTION DETECTION” or “FACE DETECTION” to make a
selection.
.
0Select “MOTION DETECTION” to start recording upon detection of
subject’s movements.
0 Select “FACE DETECTION” to start recording upon detection of
human faces.
Setting the Detection Interval of this Camera (DETECT/MAIL
SETTING)
Sets the time period to enable detection again after the previous one.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( Q
) icon.
(Operation on this camera)
.
3Tap “DETECT/MAIL” ( P).
(Operation on this camera)
.
4Tap “DETECTION INTERVAL”.
(Operation on this camera)
.
5Tap the desired detection interval.
.
0Set the interval to perform detection. By default, it is set to 10 minutes.
Using Wi-Fi (GZ-EX555/GZ-EX515)150