JVC Gz Ex310bu User Manual

0After selecting a date, tap “NEXT”.
0 When “ALL” is tapped, Digest Playback will be performed for all the
dates.
0 Tap  L to exit the menu.
0 Tap  0029 to return to the previous screen.
7 Tap to select a scene for Digest Playback.
.
0Error message is displayed if no scene is found. Select another
scene, or tap “AUTO”.
8 Select the Digest Playback time
(Only when “AUTO” is selected in Step 7)
.
0The time display of Digest Playback varies according to the recording
time.
0 When it takes time (more than 2...

PLAYBACK PLAYLIST
Plays back the playlists that you have created.
0 The following is a screen of the model with the built-in memory.
1
Open the LCD monitor.
.
0Check if the recording mode is  0010.
0 If the mode is  0011 still image, tap  0011 on the recording screen to display
the mode switching screen.
Tap  0010 to switch the mode to video. (You can also use the  0010/0011  button
on this unit.)
2 Tap “

PLAYBACK OTHER FILE
The management information of a video may be damaged if recording is not
performed correctly, such as turning off the power in the middle of recording.
You can perform the following operations to play back the videos with
defective management information.
0 The following is a screen of the model with the built-in memory.
1
Open the LCD monitor.
.
0Check if the recording mode is  0010.
0 If the mode is  0011 still image, tap  0011 on the recording screen to display
the mode switching...

Playing Back Still Images
You can select and play back the recorded still images from an index screen
(thumbnail display).
0 The following is a screen of the model with the built-in memory.1
Open the LCD monitor.
.
0Check if the recording mode is  0011.
0 If the mode is  0010 video, tap  0010 on the recording screen to display the
mode switching screen.
Tap  0011 to switch the mode to still image. (You can also use the  0010/0011
button on this unit.)
2 Tap “

During Still Image Playback
.
DisplayDescriptionAVideo/Still Image
ModeSwitches between video and still image
modes.B0015Rotates to the left (rotates by -90° with each
tap)C0016Rotates to the right (rotates by 90° with each
tap)D001FReturns to the previous still image
0 You can perform the same operation with the
zoom lever.E0019  / 001AStarts/pauses slideshow
“Slideshow Playback” ( A p. 75)F001DAdvances to the next still image
0 You can perform the same operation with the
zoom lever.G

Searching for a Specific Video/Still Image byDate
When there is a large number of recorded videos and still images, it is difficult
to look for the desired file from the index screen.
Use the search function to find the file you want.
You can search and play videos or still images according to recording dates.
0 The following is a screen of the model with the built-in memory.1
Tap “MENU”.
.
0Tap  0027/0028  to select the media for playback.
0 Searching can be performed in both the video and still image...

Connecting to and Viewing on TV
You can connect this unit to a TV for playback. The image quality on TV
varies with the type of TV and the connecting cable. Select the connector
that best suits your TV.
0 Refer also to the instruction manual of the TV in use.
“Connecting via the HDMI Mini Connector” ( A p. 77)
“Connecting via the AV Connector” ( A p. 79)
0 To display the date and time on TV, set both “DISPLAY DATE/TIME” and
“DISPLAY ON TV” to “ON”.
“ DISPLAY DATE/TIME ” ( A p. 234)
“ DISPLAY ON TV ” ( A...

Memo : 
0Change the settings in “HDMI OUTPUT” according to the connection.
“ HDMI OUTPUT ” ( A p. 241)
0 When connected to the TV via the HDMI mini cable, images and sounds
may not be output properly depending on the TV connected.
In such cases, perform the following operations.
1) Disconnect the HDMI mini cable and connect it again.
2) Turn off and on this unit again.
0 For questions about the TV or method of connection, contact your TV's
manufacturer.Operating in Conjunction with TV via HDMI...

Connecting via the AV Connector
To playback videos on TV, connect the provided AV cable (P/N
QAM1322-001) to the AV terminal of this unit.
0 Refer also to the instruction manual of the TV in use.
0 The following is a screen of the model with the built-in memory.
1
Connect to a TV.
.
0 Turn off the camcorder by pressing the  002C button for about 2 seconds.
2 Connect the AC adapter to this unit.
.
0The unit turns on automatically.
3 Press the external input button on the TV to switch to the input from...

Deleting Unwanted Files
Delete unwanted videos and still images when the space in the recording
media is running out.
Doing so frees up more space in the recording media. “Deleting the Currently Displayed File” ( A p. 80)
“Deleting Selected Files” ( A p. 80)Memo : 
0
Deleted files cannot be restored.
0 When files in a playlist are deleted, the playlist changes.
0 Files that are protected cannot be deleted.
Release protection before deleting the file.
“Protecting Files” ( A p. 81)
0 Be sure to back up...