JVC Gz Ex310bu User Manual

Editing the Registered Face Information
Editing the Registered Face Information
You can change the name, priority level, and face information that are
registered.
*The following is a screen of the model with Wi-Fi functions.
1 Tap “MENU”.
.
0The top menu appears.
2 Tap “SETUP”.
.
3Tap “FACE REGISTRATION”.
.
0Tap  L to exit the menu.
0 Tap  0029 to return to the previous screen.
4 Tap “EDIT”.
.
5Tap the person to edit.
.
6Tap the item to edit.
.
0If you select “RECORD AGAIN”, proceed to step 6 in...

4Tap “CANCEL”.
.
5Tap the person to cancel registration of.
.
00005  appears on the selected person.
0 To remove  0005 from a person, tap on the person again.
6 Tap “SET”.
.
7Tap “YES”.
.
0Tap “YES” to delete the face information of the selected person.
0 Tap “NO” to return to the previous screen.
0 Tap “OK” when the deletion complete screen appears.
Reducing Camera Shake
When the image stabilizer is set, camera shake during video recording can
be effectively reduced.1 Open the LCD monitor.
.
2Press the...

Marking the Video While Recording
You can mark a specific scene while recording video. When a mark is made, the marked position is recorded to make it easy to find the position and start
a digest playback.
0 The mark function can be used only for videos recorded in AVCHD format.
(Videos recorded in iFrame format is not supported.)1 Open the LCD monitor.
.
2Start recording a video.
.
0Press the START/STOP button again to stop recording.
3 Tap the mark icon  0006 at the scene you want to mark.
.
0 Once a...

4Tap “HIGH SPEED RECORDING”.
.
5Tap “ON”.
.
0When “ON” is tapped, 300 frames can be recorded in 1 second.
0 To cancel high-speed recording, tap “OFF”.
6 Start recording.
.
0Press the START/STOP button again to stop recording.
0 Settings of high-speed recording are not saved when the power is
turned off.
Memo : 
0 This function does not support the iFrame recording format.
0 Images may appear grainier than other videos. The image displayed on
the LCD monitor during recording may also appear grainier.
0...

5Tap to select a recording interval (1 to 80 seconds).
.
0The greater the number of seconds, the longer the recording interval.
0 Tap  001C or  001D to scroll the screen.
0 Tap  L to exit the menu.
0 Tap  0029
 to return to the previous screen.
6 Start recording.
.
0A frame is taken at intervals of the selected period.
0 When the recording interval is set to “20SEC INTERVAL” or higher,
this unit switches to the power-saving mode between recordings.
At the next point to record, the power-saving mode will...

Recording Stop-Motion Videos (STOP-MOTION REC)
By pressing the SNAPSHOT button, 2 frames of still images are recorded,
and stop-motion videos are created by piecing these images together.
(Video files in AVCHD only)
*The following is a screen of the model with Wi-Fi functions.1 Open the LCD monitor.
.
0Check if the recording mode is  0010.
0 If the mode is  0011 still image, tap  0011 on the recording screen to display
the mode switching screen.
Tap  0010 to switch the mode to video. (You can also use...

Recording Automatically by SensingMovements (AUTO REC)
This function enables the unit to record automatically by sensing the changes in subject’s movement (brightness) within the red frame displayed on the
LCD monitor.
It can be set for both video and still image modes.
*The following is a screen of the model with Wi-Fi functions.1 Open the LCD monitor.
.
0Set the recording mode to either  0010 video or  0011 still image.
0 To switch the mode between video and still image, tap  0010 or  0011 on the...

Taking Group Shots (Self-timer)
The 10-second self-timer and Face Detection self-timer are convenient
functions for taking group photos.
The 2-second self-timer is useful for preventing camera shake caused by
pressing the shutter button.
*The following is a screen of the model with Wi-Fi functions.Memo : When shooting a photo using the self-timer function, use of a tripod is
recommended.
“Tripod Mounting” ( A p. 21)
Using the 2-/10-second Self-timer
1
Open the LCD monitor.
.
0Check if the recording mode...

Using the Face Detection Self-timer
Pressing the SNAPSHOT button starts face detection, and shooting is
performed three seconds after another person enters the frame.
This function is useful when you want to include the photographer in the
group photo.
1 Open the LCD monitor and select the still image mode.
.
0The still image mode icon appears.
2 Tap “MENU”.
.
0The top menu appears.
3 Tap “RECORD SETTING”.
.
4Tap  001D on the lower right of the screen.
.
5 Tap “SELF-TIMER”.
.
0Tap  L to exit the menu.
0...

Recording Videos with Date and Time
You can record videos together with the date and time.
Set this when you want to save the file with date and time display.
(The date and time cannot be deleted after recording.)
*The following is a screen of the model with Wi-Fi functions.1 Open the LCD monitor.
.
0Check if the recording mode is  0010.
0 If the mode is  0011 still image, tap  0011 on the recording screen to display
the mode switching screen.
Tap  0010 to switch the mode to video. (You can also use the...