JVC Dd 3 Instructions

36
Convenient functions of disc/file playback
■When a disc/file is played back 
Press [REPEAT]. 
• Each time you press [REPEAT], the repeat 
mode changes. 
*1Repeats the whole program during program 
playback. 
*2“STEP” is displayed during program/random 
playback. 
NOTE
• Repeat playback can also be set using the menu bar. (Refer to page 38.) 
• You can also specify a part to be played back 
repeatedly by using A-B r epeat playback. (Refer 
to page 39.)
• The repeat mode is automatically canceled if...

37
Convenient functions of disc/file playback
 
■When a disc is played back or paused 
1Press [VFP]. 
• The current settings are displayed.
TV screen (example) 
2Press 2 or 3 to select VFP mode. 
• Each time you press 2 or 3, VFP mode 
changes on the TV screen as follows. 
- “NORMAL” 
For normal playback. (You cannot adjust 
the image quality.) Go to step 7. 
- “CINEMA” 
Suitable for viewing a movie in a dim room. 
(You cannot adjust the image quality.) 
Go to step 7. 
- “USER1/USER2” 
You can adjust the...

38
Convenient functions of disc/file playback
■When a disc/file is played back 
1Press [ON SCREEN] twice. 
TV screen for a DVD VIDEO (example)
2Press  2 or  3 to select an item you 
want to operate, and then press 
[ENTER].
• To turn off the menu bar, press [ON  SCREEN]. 
DVD VIDEO  
 
VCD/SVCD/CD/ASF/DivX/MPEG1/MPEG2  
(the example below is for a CD) 
NOTE
* The playback status has the same meaning of 
the mark on the on-screen guide. (Refer to page 
30.)  To select the settings for those items listed...

39
Convenient functions of disc/file playback
You can play back the desired part repeatedly by 
specifying a start point (A) and an end point (B). 
■When a disc is played back 
1Press [ON SCREEN] twice. 
• The menu bar appears. (Refer to page 38.) 
2Press 2 or 3 to select  . 
3Press [ENTER]. 
4Press 5 or / to select “A-B”. 
5Press [ENTER] at the start point of 
the part to be repeated (specifying 
point A). 
• The icon on the menu bar is  . 
6Press [ENTER] at the end point of 
the part to be repeated...

40
Convenient functions of disc/file playback
You can change the initial settings of the main unit 
with the preference screen according to the envi-
ronment where the main unit is used.
■ CAUTION
• Slide the remote control mode 
selector to [AUDIO].
NOTE
• The top and bottom of the preference screen may not be displayed on a wide TV. Adjust the 
picture size on the TV. 
■When a disc/file is stopped or no disc is 
loaded (“NO DISC” is displayed in the dis-
play window)
1Press [SET UP]. 
• The preference...

41
Convenient functions of disc/file playback
 
PICTURE
ItemsContents (   : initial setting)
MONITOR 
TYPE Select the display method suitable for 
your TV. 
4 : 3 PS (Pan Scan) : 
For a TV with conventional 4:3 aspect 
ratio. When a wide screen picture is 
input, the left and right edges of the pic-
ture are not shown on the screen. (If the 
disc/file is not compatible with Pan Scan, 
the picture is displayed at the Letterbox 
ratio.) 
 :
For a TV with conventional 4:3 aspect 
ratio. When a wide screen...

42
Convenient functions of disc/file playback
  
  
?
?AUDIO
Items
Contents (  : initial setting)
DIGITAL 
AUDIO 
OUTPUTSelect the output signal type suitable to 
the device connected to the [LINE-DIGI-
TAL OUT] terminal. Refer to “List of rela-
tionships of DIGITAL AUDIO OUTPUT 
preference items and output signal” on 
page 43. 
PCM ONLY : 
Device corresponding only to linear PCM. 
DOLBY DIGITAL/PCM : 
Dolby Digital decoder or device having 
the same function. 
 : 
DTS/Dolby Digital decoder or device...

43
Convenient functions of disc/file playback
NOTE
• Among DVD VIDEOs without copyright protection, there may be some DVD VIDEOs that output a 20- or 
24- bit signal through the [LINE-DIGITAL OUT] terminal. 
Language codes
List of relationships of DIGITAL AUDI O OUTPUT preference items and output 
signal
Playback disc/file DIGITAL AUDIO OUTPUT preference
STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY
48 kHz, 16/20/24 bits
linear PCM DVD VIDEO
96 kHz linear PCM DVD VIDEO 48 kHz, 16 bits stereo linear PCM
DTS DVD...

44
Playing back sources from other devices
 
1Press [LINE]. 
• Each time you press [LINE], the display 
changes in the display window as follows.
- “LINE 1” for selecting the device con-
nected to the [LINE IN 1] terminal
- “LINE 2” for selecting the device con-
nected to the [LINE IN 2] terminals
- “TV SOUND” for selecting the TV con-
nected to the [AV] terminal
- “LINE-DIGITAL” for selecting the digital 
audio device connected to the [LINE-DIGI-
TAL IN] terminal
• You can also select the connected...

45
Playing back sources from other devices
 
When you start analog playback of a portable digi-
tal audio player connected to the [LINE IN 1] termi-
nal while the main unit is off or another source is 
selected, the main unit automatically turns on and 
the source changes to the connected portable digi-
tal audio player. This function is called the quick 
portable link function (QP LINK). 
Press [QP LINK] repeatedly to select 
“QP ON” in the display window. 
• To deactivate QP LINK, select “QP OFF”....