JVC Dd 3 Instructions

NETWORK MEDIA SYSTEM
INSTRUCTIONS
LVT1546-002A[B]
DD-8
Consists of CA-DD8, SP-PWDD8, 
SP-DD8F and SP-DD8S
DD-3
Consists of CA-DD3, SP-PWDD3, 
SP-DD3F and SP-DD8S
DD-1
Consists of CA-DD1, SP-PWDD1, 
SP-DD1F and SP-DD1S
DIGITAL MEDIA SYSTEM
(Only for DD-8 and DD-3) 
DD-831[B].book  Page 1  Tuesday, August 1, 2006  12:09 PM
 

G-1
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
CAUTION
• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a  newspaper or cloth, etc., the heat may not be able 
to get out.)
• Do not place any naked flame sources, su ch as lighted candles, on the apparatus.
• When discarding batteries, environmental problems must be considered and local...

G-2
 
IMPORTANT for the U.K.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in 
your home or the cable is too short to reach a power  point, then obtain an appropriate safety approved 
extension lead or consult your dealer.
BE SURE  to replace the fuse only with an identical  approved type, as originally fitted.
If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to 
avoid a possible shock...

G-3
CAUTION — F button! (CA-DD8/CA-DD3/CA-DD1) 
Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing 
the apparatus, ensure that the plug is easily accessible. 
The  F button in any position does not disconnect the mains line.
• When the system is on standby , the STANDBY lamp lights red.
• When the system is turned on , the STANDBY lamp goes off.
The power can be remote controlled.
CAUTION (SP-PWDD8/ SP-PWDD3/SP-PWDD1) 
The power supply to the subwoofer...

G-4
SAFETY INSTRUCTIONS
“SOME DOS AND DON TS ON THE SAFE USE OF EQUIPMENT”
This equipment has been designed and manufactured to meet international safety standards but, like any 
electrical equipment, care must be taken if you are to  obtain the best results and safety is to be assured.
Do read the operating instructions be fore you attempt to use the equipment.
Do ensure that all electrical connections (including  the mains plug, extension leads and interconnections 
between pieces of equipment) are...

1
Introduction
Thank you for purchasing a JVC product. 
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain 
the best possible performance from the unit.
Part description ............................. 3
Using the remote control .............. 4
Preparation ..................................... 5
Connecting the antennas ................................ 5
Connecting the speakers ................................ 6
Connecting a TV...

2
IntroductionPlaying back sources from other 
devices.......................................... 44
Selecting other devices as  the source .......... 44
Selecting the signal gain ............................... 44
QP LINK ........................................................ 45
Operating other devices using the 
remote control....... ....................... 46
Operating a TV using the remote control ...... 46
Operating a VCR/STB using the 
remote control................................................

3
Introduction
The numbers refer to the pages in which the parts are explained. 
*1 The [PHONES] terminal is for connecting a pair of headphones equipped with a stereo plug (not supplied). 
When the headphones are connected, the speakers do not produce any sound. (“HEADPHONE” appears 
in the display window.) 
 
*2 For DD-8/DD-3 users: Refer to the separate volume of the operation manual for the network function. 
For DD-1 users: The [LAN] terminal is not available. 
*3 For DD-8/DD-3 users: Refer to page...

4
Introduction
The numbers refer to the pages in which the parts 
are explained. There are some differences between DD-8/DD-3 
and DD-1 in the locations of the remote control 
buttons as shown below.
• If the effective range of the remote control 
decreases, replace both batteries.
■ CAUTION
• Do not expose batteries to heat or flame.
Point the remote control directly at the 
front of the main unit.
• Do not block the remote control sensor on the 
main unit.
• Use the remote control at a position higher...

5
Preparation
  
Setting up the AM loop antenna
Connecting the AM loop antenna
Turn the AM loop antenna to find the best position 
for radio reception.
NOTE
• Make sure that the antenna conductors do not touch any other terminals. This could cause poor 
reception.
  
If reception is poor
NOTE
• A coaxial cable is recommended as it reduces interference for FM reception.
Connecting the antennas
AM loop antenna (supplied)
If insulation covers the tips of the 
antenna cable, twist and pull off 
the...