JVC Av 2986me Instructions

11
AI ECO SENSOR (ECO)/ECO MODEYou can adjust TV screen contrast according to the brightness of 
your room.
Press the ECO button to select the desired mode.OFF Cancel the function.
MODE-1/ECO-1 Mild contrast (recommended.)
MODE-2/ECO-2 Even contrast.DISPLAY (for AI ECO SENSOR only)
Display the graphic of the function.
To operate this function with a menu:
When you set DVD THEATER STATUS in DVD MENU to ON, you 
cannot adjust AI ECO SENSOR / ECO MODE.
Note :  AI ECO SENSOR for M and S series....

12PIP  Display the sub picture.
To cancel, press the PIP button again.
Notes:
•  You can hear the sound from the main picture only.
• 
When main picture and sub picture are the same TV channel.Press SUB-P -/+Main picture will be changed TV channel 
follow as sub picture.
Press 
 ( Input )
To change sub picture to video mode.
Press CHANNEL -/+
Sub picture will be changed TV channel follow 
as Main picture.
Press CHANNEL -/+
Until main picture change to video mode.
SUB-P -/+ Select the desired TV channel...

13
Original features for picture (continued)
TEXT LANGUAGEYou can set the Teletext language group that corresponds to the 
programmes.
Select TEXT LANGUAGE in the INSTALL menu, then choose the 
desired language group.GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian, 
Italian, French, Spanish, Portuguese, Turkish
GROUP-2 Polish, German, Estonian, Slovenian, Czech, Slovakian, 
Rumanian
GROUP-3 Polish, German, Estonian, Lettish, Russian, UkrainianDepending on the broadcast, the language set may...

14SOUND SYSTEMYou can select an appropriate sound system when abnormal sound 
occurs even when the picture appears normally.
Press the SOUND SYSTEM button to select a setting.
This function is not available in video mode.
For the sound system in each country or region, see the table below:Basic setting for sound
B/G       I       D/K       M
SOUND MODEYou can choose the desired sound setting.Select the SOUND MODE in SOUND menu, then choose the setting.USER You can change this sound setting as you like....

15
CINEMA SURROUNDYou can enjoy an enhanced sound for wider audience.
Press the CINEMA SURROUND button to select a setting.OFF Cancel the function.
ON Listen to sound with wider audience effect.This function is not available when SOUND MODE is set to SOUND 
TURBO.
To operate this function with a menu:STEREO / I
■II ( 
 )
You can enjoy the stereo and bilingual broadcasted programmes.
Press the 
 button to select the desired mode.
Select stereo sound.Select monaural sound.
ISelect bilingual I (sub I)....

16DVD MenuAUTO SIGNAL DETECTWhen the DVD input signal is detected, the input mode will be changed 
to VIDEO-2 automatically. And when the DVD input signal is not 
detected, the input mode will be changed to RF previous input mode.Select AUTO SIGNAL DETECT in DVD MENU under FEATURES 
menu then choose ON or OFF (Factory setting is ON).
Press the “POWER ON” button on the DVD players or VCRs (follow 
by the “PLAY” button for VCRs) so that the signal can be detected. DVD PICTURE MODEYou can enhance the...

17
Customized settingVNRYou can reduce the picture noise.Select VNR in PICTURE menu, then choose a setting of VNR function.OFF VNR is turned off.
AUTO Effect of VNR is automatically controlled.
MIN Effect of VNR becomes minimum level.
MAX Effect of VNR becomes maximum level.If you select MAX, the picture becomes softer even if the original 
picture is sharp.
When you select VIDEO-2, you cannot adjust VNR function.LANGUAGEYou can choose your desired on screen display language.Select LANGUAGE in the...

18Customized setting (continued)
DISPLAYYou can display the programme number, video terminal number 
and PR list on the screen.
Press the DISPLAY button to select the desired mode:
Choose a TV channel or a VIDEO terminal.1  Press the DISPLAY button to display the PR LIST.2  Select a programme number or video terminal by pressing the 
5/∞ button to move up/down on the programme number or press 
the 2/3 button to skip for each 7 programme numbers, then press 
MENU/OK button.
ON         OFF          PR...

19
To register the TV channels automatically 
(AUTO PROGRAM)You can register the TV channels into the TV’s channel list 
automatically.1  Display the INSTALL menu.2  Choose AUTO PROGRAM, then press the MENU/OK button.
  AUTO PROGRAM function starts, and the channels received are 
registered in the channel list (PR LIST) automatically.3  The EDIT menu appears.To edit the channel list Proceed to Step 3 of “To edit the channel list 
(PR LIST)” on page 20.
If a channel is not 
registeredProceed to Step 3 of...

20
To add in the new channel
(INSERT in the EDIT menu)You can add in new channels in the TV channel list as you like.
You need to fi nd the “CH/CC” number for the TV channel. Find the 
“CH/CC” number corresponding to the channel number of the TV 
channel from “CH/CC number list” on page 21.1  Display the INSTALL menu.2  Choose EDIT/MANUAL, then press the MENU/OK button. 
  EDIT menu appears.3  Choose the PR number for which you will register a new TV 
channel. When you add a new TV channel of NTSC-M...