JVC Av 2106be Instructions

11
Using the TV’s menus
ON TIMER
Your TV will automatically turn on and
tune into the channel you set after the
period of time you set.
1Press MENU T to display the
“MENU 1” menu, then select
“ON TIMER”.
          MENU        1
  INPUT               TV
  ON TIMER
              PR 1  0:00
  VNR                OFF
 OPERATE BY VOL-+
 SELECT  BY      EXIT BY
 PROGRAM BY -+
    DISPLAY


	
2Press MENU M to select a channel
you want to view when the TV turns
on.
3Press VOLUME M to select the
period of...

12
Using the TV’s menus
VNR (Video Noise Reduction)
You can reduce the picture noise.
1Press MENU T to display the
“MENU 1” menu, then select “VNR”.
          MENU        1
  INPUT               TV
  ON TIMER
              PR 1  0:00
  VNR                 ON
 
 SELECT  BY      EXIT BY
 OPERATE BY -+    
 DISPLAY
2Press MENU M to select “ON”.
To cancel the VNR function, select
“OFF”.
AUTO SHUTOFF
You can set your TV to turn off if no
signals are received for about 15 minutes
or longer after the end of a...

13
Using the TV’s menus
SETUP TOUR
You can start the SETUP TOUR function.
1Press MENU T to display the
“MENU 3” menu, then select
“SETUP TOUR”.
          MENU        3
  AUTO CH PRESET        
  MANUAL CH PRESET
  SETUP TOUR
  LANGUAGE       ENGLISH
   
                       
 SELECT  BY      EXIT BY
 OPERATE BY -+    
 DISPLAY
2Press MENU M.
JVC logo is appear and the SETUP
TOUR function will start.
For details, see page 6.
LANGUAGE
You can select the language for the on-
screen display.
1Press MENU T...

14
Using the TV’s menus
MANUAL CH PRESET
You can manually preset desired TV
channels to desired channels.
1Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
          MENU        3
  AUTO CH PRESET        
  MANUAL CH PRESET
  SETUP TOUR
  LANGUAGE       ENGLISH
 
 SELECT  BY      EXIT BY
 OPERATE BY -+    
 DISPLAY
2Press MENU M.
The sub-menu is displayed.
   MANUAL
   FINE
   SKIP              NO
   SOUND SYSTEM     B/G
   EXIT
SELECT  BY       PR 1 VL
PROGRAM BY -+    EXIT BY...

15
Using the TV’s menus
SKIP
You can set undesired channels to be
skipped. Channels set to be skipped
cannot be selected by the CHANNEL m
buttons nor the CHANNEL SCAN button.
•Channels to which TV channels have not
been preset are automatically set to be
skipped.
1Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
2Press MENU M.
The sub-menu is displayed.
3Press MENU T to select “SKIP”.
   MANUAL
   FINE
   SKIP              NO
   SOUND SYSTEM     B/G
   EXIT
SELECT  BY       PR 3...

16
Using the buttons on the TV
1MENU button
• MENU 
 button
2CHANNEL m buttons
• MENU m buttons
3VOLUME m buttons
• EXIT from MENU buttons
4Remote control sensor
5ON TIMER lamp
The light is switched on
while ON TIMER function
is operating.
6POWER lamp
When the Main power is
on, the light is red.
7POWER/ON TIMER lamp
When the Main power is
on, the light is green.
When ON TIMER function
is on, it is red.
8Main power button 


MENU CHANNEL VOLUME
EXITPOWER /
ON  TIMER
123
784
MENUCHANNELVOLUME
EXITON TIMER...

17
Using the buttons on the TV
Basic operation
•Check to make sure the CHILD LOCK
function is set to “OFF”. When the CHILD
LOCK function is set to “ON”, the TV cannot
be operated using the front control buttons.
For details, see “CHILD LOCK” on page 12.
1Press CHANNEL M to turn the TV
on from standby mode.
2Press CHANNEL M to select a
channel.
3Press VOLUME M to adjust the
volume.
4To turn your TV off, press the Main
power button to turn off the TV’s
main power.
To change the TV mode to the VIDEO
mode:...

18
Troubleshooting
If there is no picture or the TV does not operate normally, make sure the problem isn’t due
to the reasons indicated below.
If the problem persists even after taking the measures indicated, please contact a service
technician.
Poor picture
•Press the COLOUR SYSTEM button to select
another colour system. (see page 8.)
•Adjust the picture settings. (see page 15.)
•Set the Picture mode to STANDARD.
(see page 8.)
•If noise (snow) totally blocks out the picture,
check the following.
-Have...

19
Asia,
Middle
East
Specifications
TV RF systems
B, G, I, D, K, K1
Colour systems
PAL, SECAM, NTSC 3.58 MHz/NTSC 4.43 MHz (in VIDEO mode only)
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
External input / output
INPUT: VIDEO input (RCA), AUDIO input (RCA)
OUTPUT: VIDEO output (RCA), AUDIO output (RCA)
Headphone jack: stereo mini jack (3.5 mm diameter)
Accessories
•Remote control unit: RM-C360GY
•AA / R6 /...

 GGT0106-001B-H_Cover 16/3/06, 9:55 AM2