JBL Micro 2 Owners Manual

							®
jbl on stage micro II speaker dock for iPhone/iPod
®*
User Guide
English ........................ 2
Deutsch  ....................... 8
Français  ...................... 15
Español  ..................... 22
Italiano  ...................... 29
Dutch  ........................ 36
Korean  ....................... 43
Norwegian  ................50
Danish  ........................ 57
Japanese  .................... 64
Simplified Chinese  .....71
Finnish  ...................... 78
Russian  ......................85
Português  .................. 92
iPhone not included  
						

							2
Important Safety InstructionsPlease read the following precautions before use:
1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with a dry cloth.
7.  Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8.  Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that
produce heat.
9.  Do not defeat the safety purpose of the polarized or grounding-type \
plug. A polarized plug has two blades with one wider than the other. 
A grounding-type plug has two blades and a third grounding prong. 
The wide blade or the third prong is provided for your safety. If the 
provided plug does not fit into your outlet, consult an electrician for \
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, 
particularly at plugs, convenience receptacles and the point where 
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table 
specified by the manufacturer or sold with the apparatus. 
When a cart is used, use caution when moving the 
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused 
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is req\
uired when 
the apparatus has been damaged in any way, such as power supply cord or \
plug 
is damaged, liquid has been spilled or objects have fallen into the appa\
ratus, 
the apparatus has been exposed to rain or moisture, does not operate nor\
mally, 
or has been dropped.
15. Do not expose this apparatus to dripping or splashing and ensure tha\
t no 
objects filled with liquids, such as vases, are placed on the apparatus.\
16.  To completely disconnect this apparatus from the AC mains, 
disconnect the power supply cord plug from the AC receptacle.
17.  The mains plug of the power supply cord shall remain readily 
operable.
18.  Do not expose batteries to excessive heat such as sunshine, 
fire or the like.
 
The lightning flash with arrowhead symbol, within an  
  equilateral triangle, is intended to alert the user to the  
  presence of uninsulated “dangerous voltage” within the  
  product’s enclosure that may be of sufficient magnitude  
  to constitute a risk of electric shock to persons.
  The exclamation point within an equilateral triangle is  
  intended to alert the user to the presence of important  
  operating and maintenance (servicing) instructions in  
  the literature accompanying the product.
WARNING: To reduce the risk of fire or electric shock, do not expose 
this apparatus to rain or moisture.
Important Note for All Electronic Products:
Before inserting or unplugging audio cables from the source device’s 
headphones or line-level output jacks, it is good practice to turn off 
the  device  first.  This  will  prolong  the  life  of  your  unit,  help  protect 
your device from static electricity and prevent potential damage. 
						

							3
fcc regulations
FCC Information for Users
This device complies with Part 15 of the FCC Rules. Operation is subject\
 to the following two conditions: (1) This device may not cause harmfu\
l interference; and (2) this device must accept any interference received, including i\
nterference that may cause undesired operation.
Radio and Television Interference
This equipment has been tested and found to comply with the limits for a\
 Class B digital device, pursuant to Part 15 of the FCC Rules. These lim\
its are designed to provide reasonable protection against harmful interference in a resident\
ial installation. This equipment generates, uses and can radiate radio f\
requency energy and, if not installed and used in accordance with the instructions, may cause\
 harmful interference to radio communications. However, there is no guar\
antee that interference will not occur in a particular installation. If this equipment does caus\
e interference to radio or television reception, which can be determined\
 by turning the equipment off and then on, the user is encouraged to try to correct the interferen\
ce by one or more of the following measures:•  Increase the separation between the equipment and receiver.•  Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits.•  Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by JBL could void the us\
er’s authority to operate the equipment.
Battery Disposal
Alkaline batteries are considered non-hazardous. Rechargeable batteries \
(i.e., nickel cadmium, nickel metal-hydride, lithium and lithium-ion) \
are considered hazardous household materials and may pose an unnecessary health and saf\
ety risk.
In the European Union and other locations, it is illegal to dispose of a\
ny battery with household trash. All batteries must be disposed of in an\
 environmentally sound manner. Contact your local waste management officials for information re\
garding the environmentally sound collection, recycling and disposal of \
used batteries.
IC Statement and Warning
This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 
						

							4
jbl on stage micro II easy setup guide
Carefully unpack your speaker
system and identify all its
components. JBL On Stage
Micro II, power supply, remote 
and adapter.Step 2. Move the battery door to
the unlocked position to open
the battery compartment.
or Step 3. Place 4 AAA batteries 
in the battery compartment.
Step 5. Place the appropriate iPhone/iPod adapter onto JBL On Stage 
Micro II. Place your iPhone/iPod on the docking connector or connect 
a 3.5mm (1/8") stereo audio cable to the rear of the JBL On Stage 
Micro II. Connect the audio cable to the audio source. Step 4. Connect the power adapter 
into the jack labeled “6V DC In” on 
the rear of the JBL On Stage Micro 
II and plug the power adapter into 
a wall outlet or power strip.Step 6. Press the Power button 
on the back of the JBL On Stage 
Micro II. A green LED will light 
when the JBL On Stage Micro II 
system is on.Step 7. Adjust the volume using 
(+) to increase and (–) to decrease. 
Press both to mute the JBL On 
Stage Micro II. Press either button 
to unmute.
Syncing and transfering files with your computer
Make sure your iPhone/iPod is securely docked into the JBL On Stage Micr\
o II. Connect a USB cable (not included) into the USB jack on the back\
 of  the unit, connect other end of the USB cable directly
to your computer’s USB port. Make sure your iPhone/iPod and iTunes ar\
e updated to the latest software version.
* Auxilary audio
cables not included-+ 
						

							5
troubleshooting your jbl on stage micro II
SymptomPossible Problem
Solution
If you have any questions or need further assistance, please visit www.j\
bl.com.
These specifications are subject to change without notice. No sound from the 
JBL On Stage Micro II 
speaker system
Technical Specifications
Frequency Response:
  70Hz – 20kHz
Power Consumption:
  10W Maximum
Power Input:
  6V/1.5A
JBL On Stage Micro II Transducer:
  (2) 1
" Full range per channel
Dimensions:
  Diameter – 6
" (150mm)    
  Height – 1-3/4" (38mm) 
System Weight:
  2.22 lb (1.01kg)
Battery:
  Size – AAA
  Type – Alkaline, NiMh
    Quantity – 4
DO NOT MIX BATTERY TYPES.
DO NOT MIX CHARGED AND 
PARTIALLY CHARGED BATTERIES.
BATTERIES WILL NOT RECHARGE 
WHILE IN JBL ON STAGE MICRO II. Ensure that the power supply is connected to a live 
power source and properly connected to the JBL On 
Stage Micro II. Note: When the JBL On Stage Micro II 
is powered, a green power LED on the JBL On Stage 
Micro II should light up.
Touch the volume “Up” (+) pad on the volume 
control to unmute and/or increase the system volume 
level.
Note: Touching the volume “Down” (–) pad lowers 
the system volume. Touching both the (+) and (–) 
volume control pads at the same time will mute the 
system.
Increase the volume level on the audio source device.
Replace the batteries.
Press the Play button on the iPhone/iPod or remote 
control.
Note: If the iPhone/iPod is paused more than 10 min-
utes, press the JBL On Stage Micro II Power button to 
turn the unit back on. Press either (+) or (–) 
to unmute.
No power to the system
Power adapter plug is not 
inserted correctly
No volume or low volume
Input source is low
Low or drained batteries
iPhone/iPod is paused
iPhone/iPod is paused 
(battery-only mode)
Troubleshooting 
						

							6
Troubleshooting
SymptomPossible Problem Solution
No sound from the JBL On Stage 
Micro II speaker system (continued) The JBL On Stage Micro II has been 
muted for more than 10 minutes in the 
battery-only mode Press the JBL On Stage Micro II Power button to turn the unit 
back on. Press either (+) or (–) to unmute.
No sound, no LED
No audio signal has been received for 10 minutes and JBL On Stage Micro II is in standby mode
Make sure audio signal is supplied through docked iPhone/iPod or “Audio In” jack. 
No power; green LED is not on Wall adapter is not plugged into the 
JBL On Stage Micro II correctly
Wall adapter is not receiving AC power Check the connection of the wall adapter.
Place the wall adapter in a known powered outlet. Test the outlet 
with a lamp or other device.
Connect the JBL On Stage Micro II to a known audio source. 
Test the audio source with headphones. 
						

							7
SymptomPossible Problem SolutionNote
There is no sound coming from 
the JBL On Stage Micro II.
Sound comes from only one
side/channel. Make sure that the wall outlet 
or power strip has power. 
 
Make sure that all switches for 
outlet/power strip are on and 
that all switches for the unit 
are on.
Make sure that the iPhone/iPod 
is properly docked or that the 
auxiliary cable is properly con-
nected.
Turn up the volume.
Check the unit with a source 
that you know to be good.
Connect the “Aux In” cable to 
the headphone jack of your 
iPhone/iPod. Is the LED on? If the LED 
 
is not on, power is not
getting to your JBL On Stage 
Micro II. Try the solutions 
shown.
No power to unit.
Incorrect source selection.
iPhone/iPod or auxiliary cable 
is not seated properly. Make sure that the iPhone/iPod 
is seated all the way into the 
docking station.
Make sure that the auxiliary 
cable is seated all the way into 
the jack.
Try resetting the iPhone/iPod.If you are using a 3.5mm    
auxiliary extension cable,
make sure it is a stereo
cable.
Troubleshooting 
						

							SymptomPossible Problem SolutionNote
Distortion (static, cracking
or hissing sounds).
JBL On Stage Micro II
emits a loud hum
or buzzing noise.
Speaker system experiences 
radio-frequency interference or 
picks up a radio-station trans-
mission. Input cable is not plugged in 
properly.
Cable may be bad.
Ground logo (an unsuitable 
connection).
Input cable may be
picking up interference.
Audio source or source material 
may be the problem.
Test the JBL On Stage Micro II
 
with another source. Does the distortion occur with 
specific songs? If so, check 
the recording or record the 
source again.
Volume level may be too high.
EQ setting may be too high. Check the EQ setting on your 
iPhone/iPod or source device.It is recommended that you set 
the source device EQ to “Flat” 
or “Off.”
Check the volume of the source.
Check the input cable connec-
tion.
Replace the cable.
Turn the JBL On Stage Micro II
 
off and connect it to another 
wall outlet.
Purchase a ferrite core and   
wrap the excess cable around it. 
A ferrite core can be purchased 
at your local electronics store. Some devices will distort the 
output signal if the volume is 
set to maximum.
8
Troubleshooting 
						

							9
jbl on stage micro II remote easy setup guide
Additional Features:
1. In the battery-only mode, the JBL On Stage Micro II loudspeaker dock wil\
l turn off to save battery power when muted or paused    
    for longer than 10 minutes.
2.  In the wall adapter power supply mode JBL On Stage Micro II will go \
into standby mode if no audio signal is detected for 10 
     minutes. The green LED will turn off. Once an audio signal is detec\
ted the speaker will return to normal playing mode and the 
     green LED will light up.
3.  iPod touch and iPhone menu navigation may require the user to manual\
ly put the iPhone/iPod in music mode.
4.  When the batteries are low the “low battery LED” will turn on.\
 Change batteries immediately or switch to the power adapter. Volume Down
iPhone/iPod Play/Pause
1
iPhone/iPod Previous/Rewind *Hold for “rewind”
iPhone/iPod Scroll Up
iPhone/iPod Menu Volume Up
Mute/Unmute
1
iPhone/iPod Next/Fast Forward
*Hold for “fast for ward”
iPhone/iPod Scroll Down
iPhone/iPod Select/Enter 
						

							10
Harman Consumer, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
1.516.255.4525 (USA only)
www.jbl.com© 2010 Harman International Industries, Incorporated. All rights reser ved. Tous droits réser vés.
Part Number: 950-0282-001
JBL and Odyssey are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries.
*The trademark On Stage is used with permission of OSA International, Inc.
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone/iPod not 
included. “Made for iPod” means that an electronic accessor y has been designed to connect specif ically to iPod and has been cer tif ied by the developer to meet Apple per-
formance standards. “Works with iPhone” means than an electronic accessor y has been designed to connect specif ically to iPhone and has been cer tif ied by the developer to 
meet Apple per formance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulator y standards.
Features, specif ications and appearance are subject to change without notice.
JBL et Odyssey sont des marques commerciales de Harman International Industries, Incorporated, déposées aux États-Unis et/ou dans d’autres pays.
*Le marque “On Stage” est utilisée avec la permission de OSA International, Inc.
iPhone est une marque commerciale d’Apple Inc., deposée aux États-Unis et dans d’autres pays. iPod est une marque commerciale d’Apple Inc., deposée aux États-Unis et 
dans d’autres pays. iPhone/iPod non inclus. « Made for iPod » signif ie qu’un accessoire électronique a été conçu pour assurer la connexion spécif iquement à iPod et a été 
homologué par le développeur pour répondre aux normes de per formance d’Apple. « Works with iPhone » signif ie qu’un accessoire électronique a été conçu pour assurer la 
connexion spécif iquement à iPhone et a été homologué par le développeur pour répondre aux normes de per formance d’Apple. Apple n’assume aucune responsabilité pour 
le fonctionnement de cet appareil, ni pour sa conformité aux normes de sécurité et réglementaires. 
Sous réser ve de modif ication.