Innovative Concepts In Entertainment Wacky Ducks Owners And Service Manual

OWNERS AND SERVICE MANUAL
COPYRIGHT 2000, INNOVATIVE CONCEPTS IN ENTERTAINMENT INC.
MANUFACTURED UNDER LICENSE FROM JUPITER GAMES
10123 MAIN STREET, CLARENCE, NY 14031
SERVICE  1-716-759-0360  FAX 1-716-759-0084  E-MAIL [email protected] 

TABLE OF CONTENTS
INTRODUCTION

 GAME FEATURES

 GAME PLAY
ASSEMBLY

  BEFORE YOU BEGIN

 TOOLS NEEDED

 INSTALLATION

  SETTING A.C. LINE VOLTAGES

  A.C. LINE VOLTAGE ADJUSTMENTS
SET-UP / TESTING

 SAFETY PRECAUTIONS

  PROGRAMMING YOUR GAME

 OPTION MODES

 TESTING
QUICK TROUBLESHOOTING

  PROBLEMS AND SOLUTIONS
REPAIR

 OPERATIONAL BACKGROUND

 MECHANICAL REPAIR

  ELECTRICAL / ELECTRONIC REPAIR

 MAINTENANCE
PARTS LISTINGS
SCHEMATICS
WARRANTY INFORMATION 

INTRODUCTION
GAME FEATURES
Thank you for your purchase of the new W ACKY
DUCKS
 redemption game from I.C.E.
Through an exclusive agreement with JUPITER
GAMES, I.C.E. is able to bring you an innovative
product with all of the features and reliability
youve come to expect in our games.
The game is constructed of a quality 7 ply MDO
plywood cabinet. The cabinet is then sealed,
painted and decaled using laminated graphics
that resist most common cleaning agents. All
metal parts are powder coated for maximum...

INTRODUCTION
ends once the player hits a duck. The player then
wins the tickets that were displayed at the time of
the hit.
NOTE: This game is generally set up as a One
Hit game. The operator can however set the
game up for a different predetermined number of
hits. 

ASSEMBLY
BEFORE YOU BEGIN
WARNING: WHEN INSTALLING THIS GAME, A
3 PRONG GROUNDED A.C. RECEPTICLE
MUST BE USED. FAILURE TO DO SO COULD
RESULT IN INJURY TO YOURSELF OR
OTHERS. FAILURE TO USE A GROUNDED
RECEPTICLE COULD ALSO CAUSE
IMPROPER GAME OPERATION, OR DAMAGE
TO THE ELECTRONICS
DO NOT DEFEAT OR REMOVE THE
GROUNDING PRONG ON THE POWER CORD
FOR THE SAME REASON AS GIVEN ABOVE.
USING AN IMPROPERLY GROUNDED GAME
COULD VOID YOUR W ARRANTY.
HAVE A QUALIFIED ELECTRICIAN CHECK
YOU’RE A.C. RECEPTICLE TO BE SURE...

ASSEMBLY
SETTING A.C. LINE
VOLTAGES
The game comes with 4 available line voltage
settings as described below. These settings
should be used to provide A.C. power in the
correct range to the game without over or under
powering it.
POW ER RANGE VOLTAGE SETTING
     90-110 V.A.C. 115
   110-130 V.A.C. 125
   200-220 V.A.C. 230
   220-250 V.A.C. 250
The game uses a POW ER MODULE to handle
all of the A.C. power distribution chores of the
game. It incorporates an On-Off switch, primary
A.C. game fusing, and...

SET-UP / TESTING
SAFETY PRECAUTIONS
WARNING: WHEN INSTALLING THIS GAME, A
3 PRONG GROUNDED A.C. RECEPTICLE
MUST BE USED. FAILURE TO DO SO COULD
RESULT IN INJURY TO YOURSELF OR
OTHERS. FAILURE TO USE A GROUNDED
RECEPTICLE COULD ALSO CAUSE
IMPROPER GAME OPERATION, OR DAMAGE
TO THE ELECTRONICS
DO NOT DEFEAT OR REMOVE THE
GROUNDING PRONG ON THE POWER CORD
FOR THE SAME REASON AS GIVEN ABOVE.
USING AN IMPROPERLY GROUNDED GAME
COULD VOID YOUR W ARRANTY.
HAVE A QUALIFIED ELECTRICIAN CHECK
YOU’RE A.C. RECEPTICLE...

SET-UP / TESTING
MODE 1
(GAME LENGTH)
This mode determines how long the game lasts
in SECONDS. The range for this value is 0-30.
The default value for this game is 10
SETTING A 0 FOR THIS MODE WILL PUT
THE GAME INTO THE RANDOM TICKET
MODE.
MODE 2
(COIN OR CREDIT COUNTER)
This mode determines if the coin counter will
count coins or credits. (Example: If it takes 3
coins to start a game, then 3 coins would equal 1
credit). Setting a 0 equals coins. Setting a 1
equals credits. The default value for this...

SET-UP / TESTING
MODE 9
(FACTORY RESET)
This mode has the capability to reset all options
to the factory default values. The range for this
option is 0-1. Setting a 1 will reset all values.
The default value for this option is 0 (no reset)
NOTE: THE GAME CAN ALSO BE RESET TO
FACTORY DEFAULT VALUES BY TURNING
THE GAME OFF, REMOVING THE BATTERY
FROM THE MAIN P.C. BOARD. , WAIT A FEW
MINUTES THEN TURN THE GAME BACK ON.
THE ABOVE PROCEEDURE IS ALSO
VALUABLE IF FOR SOME REASON THE GAME
ELECTRONICS WERE TO...

SET-UP / TESTING
ROPE LIGHTING
The rope light in the marquee is operated by a
rope light controller located behind the WACKY
DUCKS sign.
Determine which type of controller is installed in
your game. (See photos)
If you have the type shown in the photo below,
use the following instructions:
Check to see that the rope light controller is set
as follows:
1. The CHASE mode switch should be set to
    position #2.
2. The SPEED mode knob should be turned
    fully clockwise, then rotated back about ¼...