InFocus Projector Work Big In15 User Manual
Have a look at the manual InFocus Projector Work Big In15 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 14
Projector Basics
14
Auto Adjustment of an RGB Image
When the input source is RGB (computer), the projector automatically adjusts vertical and
horizontal positioning, frequency, and phase whenever it detects an RGB signal (following input
source selection, power up, etc.). You can also execute an automatic adjustment operation by
pressing the [AUTO] key.
zYou can turn off auto adjustment when you want to disable auto adjustment and maintain
manual settings.
zThe projected image may become distorted...](http://img.usermanuals.tech/thumb/2503/90784/w64_infocus-work-big-in15-manual_d-13.png "Page 14
Projector Basics
14
Auto Adjustment of an RGB Image
When the input source is RGB (computer), the projector automatically adjusts vertical and
horizontal positioning, frequency, and phase whenever it detects an RGB signal (following input
source selection, power up, etc.). You can also execute an automatic adjustment operation by
pressing the [AUTO] key.
zYou can turn off auto adjustment when you want to disable auto adjustment and maintain
manual settings.
zThe projected image may become distorted...")
![Page 15
15
Using the Setup MenuEnglish
Using the Setup MenuPressing the [MENU] key while an image is being projected displays the setup menu on the
projected image. The setup menu can be used to configure a variety of different projector
settings. Use the cursor keys to select and configure settings, and the [ENTER] key to register
them.
The menu items that can be set (or displayed) depend on the current input source. In the
following table, the “Input Source” columns indicate whether each item appears ( )...](http://img.usermanuals.tech/thumb/2503/90784/w64_infocus-work-big-in15-manual_d-14.png "Page 15
15
Using the Setup MenuEnglish
Using the Setup MenuPressing the [MENU] key while an image is being projected displays the setup menu on the
projected image. The setup menu can be used to configure a variety of different projector
settings. Use the cursor keys to select and configure settings, and the [ENTER] key to register
them.
The menu items that can be set (or displayed) depend on the current input source. In the
following table, the “Input Source” columns indicate whether each item appears ( )...")
![Page 18
Troubleshooting
18
POWER
TEMP
LAMP: Green steady
:–
:–Zoom and focus cannot be performed due to some trouble in
the optical drive circuit. Turn off the projector and then turn it
back on again.
If the error occurs again when you turn power back on,
contact InFocus service at www.infocus.com/service
Press the [ESC] key to clear the warning message. Message : Zoom and focus
cannot be performed
for some reason. Try
turning the projector
off and then back on
again.
If this message
reappears,...](http://img.usermanuals.tech/thumb/2503/90784/w64_infocus-work-big-in15-manual_d-17.png "Page 18
Troubleshooting
18
POWER
TEMP
LAMP: Green steady
:–
:–Zoom and focus cannot be performed due to some trouble in
the optical drive circuit. Turn off the projector and then turn it
back on again.
If the error occurs again when you turn power back on,
contact InFocus service at www.infocus.com/service
Press the [ESC] key to clear the warning message. Message : Zoom and focus
cannot be performed
for some reason. Try
turning the projector
off and then back on
again.
If this message
reappears,...")
![Page 19
19
TroubleshootingEnglish
POWER
TEMP
LAMP: Green steady
:–
: Red flashing
(1-second interval)It is time to replace the lamp. Replace the lamp following the
steps under “Replacing the Lamp” in the Reference Guide on
the CD-ROM that comes with the projector. Press the [ESC]
key to clear the warning message.
Message : It is time to replace
the lamp. Use the
procedure in the
User’s Guide to
replace the lamp as
soon as possible.
POWER
TEMP
LAMP: Amber flashing J
Red steady
:–
: Red steadyThe...](http://img.usermanuals.tech/thumb/2503/90784/w64_infocus-work-big-in15-manual_d-18.png "Page 19
19
TroubleshootingEnglish
POWER
TEMP
LAMP: Green steady
:–
: Red flashing
(1-second interval)It is time to replace the lamp. Replace the lamp following the
steps under “Replacing the Lamp” in the Reference Guide on
the CD-ROM that comes with the projector. Press the [ESC]
key to clear the warning message.
Message : It is time to replace
the lamp. Use the
procedure in the
User’s Guide to
replace the lamp as
soon as possible.
POWER
TEMP
LAMP: Amber flashing J
Red steady
:–
: Red steadyThe...")
![Page 20
Troubleshooting
20
Check the following items whenever you experience any problem with the projector.
Projector Troubleshooting
Problem Cause and Recommended Action See
The projector does
not turn on when I
press the [ ]
(power) key.If the POWER/STANDBY indicator is not lit, the AC
power cord may not be connected correctly.
➔Make sure the AC power cord is connected
correctly to the projector and the power outlet
(see “Turning On the Projector”).page 10
If the TEMP or LAMP indicator remains flashing...](http://img.usermanuals.tech/thumb/2503/90784/w64_infocus-work-big-in15-manual_d-19.png "Page 20
Troubleshooting
20
Check the following items whenever you experience any problem with the projector.
Projector Troubleshooting
Problem Cause and Recommended Action See
The projector does
not turn on when I
press the [ ]
(power) key.If the POWER/STANDBY indicator is not lit, the AC
power cord may not be connected correctly.
➔Make sure the AC power cord is connected
correctly to the projector and the power outlet
(see “Turning On the Projector”).page 10
If the TEMP or LAMP indicator remains flashing...")
![Page 21
21
TroubleshootingEnglish
Try performing the following steps, which can return the projector to normal operation.
1. Press the [ ] (power) key to turn off the projector.
2. After the projector’s cool down is finished and the fan is completely stopped, unplug the
AC power cord.
3. Plug the power cord back in and turn the projector back on again.
*If the power off confirmation message does not appear when you press the [ ]
(power) key, unplug the AC power cord and wait for at least 10 minutes. Then plug...](http://img.usermanuals.tech/thumb/2503/90784/w64_infocus-work-big-in15-manual_d-20.png "Page 21
21
TroubleshootingEnglish
Try performing the following steps, which can return the projector to normal operation.
1. Press the [ ] (power) key to turn off the projector.
2. After the projector’s cool down is finished and the fan is completely stopped, unplug the
AC power cord.
3. Plug the power cord back in and turn the projector back on again.
*If the power off confirmation message does not appear when you press the [ ]
(power) key, unplug the AC power cord and wait for at least 10 minutes. Then plug...")
21 TroubleshootingEnglish Try performing the following steps, which can return the projector to normal operation. 1. Press the [ ] (power) key to turn off the projector. 2. After the projector’s cool down is finished and the fan is completely stopped, unplug the AC power cord. 3. Plug the power cord back in and turn the projector back on again. *If the power off confirmation message does not appear when you press the [ ] (power) key, unplug the AC power cord and wait for at least 10 minutes. Then plug the power cord back in and turn the projector back on again. The message “It is time to replace the lamp.” is being projected.It is time to replace the lamp. ➔Replace the lamp (see “Replacing the Lamp”).Reference Guide (CD-ROM) The message “The lamp has exceeded its service life!.” is being projected.The allowable life for the lamp has been exceeded, and the projector will not turn on. ➔Replace the lamp (see “Replacing the Lamp”).Reference Guide (CD-ROM) Problem Cause and Recommended Action See Infocus IN15_UG_E.book Page 21 Tuesday, October 23, 2007 5:37 PM
22 Service and Support Service and SupportQuestions? Were here to help! Visit us at: www.infocus.com/service Were here to support you with your new purchase. We can help you with... zDetermining screen sizes zDocumentation in other languages zConnecting your sources (TV, DVD, Cable/Satellite, Game, etc.) zSelecting optional accessories zProduct warranty protection plans Declaration of Conformity Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070-8238 USA European Office: Louis Armstrongweg 110, 1311 RL Almere, The Netherlands We declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 2004/108/EC, EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000- 3-3, Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC, Safety: IEC 60950-1:1st Edition. Trademarks Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. InFocus, In Focus, and INFOCUS (stylized), LP, LiteShow, ScreenPlay, LitePort, ASK and Proxima are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is oper-ated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-tion manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications to this equipment that are not expressly approved by InFocus Corp. may void the users authority to operate the equipment. EN 55022 Warning This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, meeting room or auditorium.USA, Canada, Latin America Customer Support Telephone +1 (503) 685-8888 TOLL FREE: 800-799-9911 Mon-Fri, 7 am - 5 pm Pacific [email protected] Pacific Customer Support Telephone Singapore: +65 63539449 China: 800.828.2268 Australia: 1300-725-295 Australia Direct Sales: 1800-885-841 Mon-Fri, 9 am - 6 pm SGT [email protected], Middle East, Africa Customer Support Telephone +31 (0)36 539 2820 Mon-Fri, 08:30 - 18:00 CET [email protected] WarningzHg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org Infocus IN15_UG_E.book Page 22 Tuesday, October 23, 2007 5:37 PM
23 Service and SupportEnglish Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Agency Approvals Product Models: W150 UL, CUL, NOM, IRAM, GOST, C-tick Other specific Country Approvals may apply. Please see product certification label. InFocus reserves the right to alter product offerings and specifications at any time without notice. Infocus IN15_UG_E.book Page 23 Tuesday, October 23, 2007 5:37 PM
Infocus IN15_UG_E.book Page 24 Tuesday, October 23, 2007 5:37 PM