InFocus Projector Work Big In1100 User Manual

							30
Setup menu
Language: allows you to select a language for the onscreen display.
Custom Key: allows you to assign a different function to the Custom 
button, allowing you to quickly and easily use the effect. Highlight an effect 
and press Select to choose a different one.
•Source Info: the default action. Shows the Source Info menu.
•Projector Info: Shows the Projector Info menu.
•Aspect Ratio: toggles among 4:3, 16:9, and Native (see page 12 and 
page 28).
•Auto Image: resets the projector to the source (page 24).
•Overscan: removes noise around the image.
•Blank Screen: displays an empty screen.
•Freeze Screen: pauses the projected image.
•Mute: turns off all sound.
•Source: cycles through available sources.
AC Power On: when this feature is on, the projector automatically turns on 
when electrical power is connected.
Auto Off Time: automatically turns the projector off after no signals are 
detected for a preset number of minutes. If an active signal is received 
before the projector powers down, the image will be displayed.
Screen Save Time: automatically blanks the screen with a black color after 
no signals are detected for a preset number of minutes. The image returns 
when an active source is detected or a remote or keypad button is pressed.
Lamp Low Power: toggles between on and off. Turn it on to lower the light 
output of the lamp. This also lowers the fan speed, making the projector 
quieter.
Power Sounds: controls whether the projector makes a sound when 
powered on and off.
Auto Source: when this feature is On, the projector automatically finds the 
active source, checking the selected Power-up Source first. When this 
feature is Off, the projector defaults to the source selected in Power-up 
Source. To display another source, you must manually select one by 
pressing the Source button on the remote or keypad.
Power-up Source: determines which source the projector checks first for 
active video during power-up.
Video Standard: when this feature is set to Auto, the projector attempts to 
automatically pick the video standard based on the input signal it receives. 
(The video standard options may vary depending on your region of the 
world.) If the projector is unable to detect the correct standard, the colors 
may not look right or the image may appear “torn.” If this happens, 
manually select a video standard by selecting NTSC, PAL, or SECAM from 
the Video Standard menu.
Closed Captions: controls closed caption display while audio is not muted. 
If this setting is not off, and audio is not muted, and the source is NTSC and 
contains captions on the selected channel, then the projector must display 
caption text overlaid on the image.
Rear Project: reverses the image so you can project from behind a 
translucent screen.
Auto Keystone: automatically adjusts vertical image.
Setup menu 
						

							31
Prevent PC Screen Saver: prevents your computer from going into Screen 
Save mode. The projector must be connected to the PC via a USB cable for 
this feature to work.
Blank Screen Color: determines what color is displayed when you press 
the Blank button on the remote.
Blank Screen Style: select Solid, Timer, or Test Patterns. The Timer option 
is useful for classroom tests or break times during meetings.
Show Messages: displays status messages (such as “Searching”) in the 
lower-left corner of the screen.
Menu Offset: allows you to change the position of the On Screen Display 
items.
Menu Transparency: allows you to change how much of the projected 
image behind the menu you can see. As the value increases, more of the 
image behind the menu is visible.
Magnify Controls: determines whether the select key can be used to change 
magnify settings when the OSD menu is not visible.
PIN Protect: the PIN (personal identification number) feature allows you 
to password protect your projector. Once you enable the PIN feature, you 
must enter the PIN before you can project an image. The default PIN on this 
projector is Menu-Up-Down-Select-Source. Use the navigation buttons on 
the remote or keypad to enter the correct 5-button press sequence. When all 
5 numbers are entered correctly, press the Select button on the remote or 
keypad to select OK. If the message “Wrong PIN” appears, verify the code 
and re-enter it. If you mis-enter a number, you must enter 5 numbers and 
press the Select button in order to access the “Wrong PIN” message and re-
enter the code.
To enter the PIN at projector startup:
Power up the projector. The “Enter PIN” dialog box appears after the 
startup screen. Enter the PIN. Use the navigation buttons on the remote or 
keypad to enter the correct button press sequence. See the description above 
for instructions.
To change the PIN:
Select “Change PIN...” in the Setup menu. Enter the existing PIN. Enter the 
new PIN. You can navigate between OK and Cancel by pressing the up and 
down buttons on the keypad. Select OK or Cancel by pressing the Select 
button. Verify the new PIN.
If you lose or forget your custom PIN:
Contact InFocus support. Go to www.infocus.com/support 
						

							32
Status and Service menu
Source Info: a read-only display of current source settings.
Projector Info: a read-only display of current projector settings.
Reset Lamp Hours: resets the lamp hours used counter in the Projector Info 
menu to zero. Do this only after changing the lamp.
Factory Reset: restores all settings to their default.
Service Code: only used by authorized service personnel.
Status and Service menu 
						

							33
Maintenance
Cleaning the lens
1Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
• Avoid using an excessive amount of cleaner, and don’t apply the 
cleaner directly to the lens. Abrasive cleaners, solvents or other harsh 
chemicals might scratch the lens.
2Lightly wipe the cleaning cloth over the lens in a circular motion.
Using the security lock
The projector has a security lock for use with a PC Guardian Cable Lock 
System. Refer to the information that came with the lock for instructions on 
how to use it.
security 
lock 
						

							34
Replacing the projection lamp
The lamp hours used timer in the Projector Info menu counts the number of 
hours the lamp has been in use. Twenty hours before the lamp life expires, 
the message “Change lamp” appears on the screen at startup.
•NOTE: You can order new lamps from www.infocus.com (in select 
areas), your retailer or your dealer. Only genuine InFocus lamps are 
tested for use in this projector. InFocus is not liable for the 
performance, safety or certification of any other lamps. The use of other 
lamps violates the projector warranty and voids all certification marks 
on this projector.
1Turn off the projector and unplug the power cord.
2Wait 60 minutes to allow the projector to cool thoroughly.
3Turn the projector upside down on a soft cloth so that the lamp door is 
facing you.
WARNINGS:
• To avoid burns, allow the projector to cool for at least 60 minutes before 
you replace the lamp.
• Only genuine InFocus lamps are tested with this projector. Use of other 
lamps may cause electrical shock and fire.
• Unplug the power cord before replacing the lamp.
• Do not drop the lamp module. The glass may shatter and cause injury.
• Do not touch the glass lamp screen. Fingerprints can obscure projection 
sharpness.
Lamp hours
turn off and unplug 
projector
wait 60 minutes 
						

							35
• Be extremely careful when removing the lamp housing. In the unlikely 
event that the lamp ruptures, small glass fragments may be generated. 
The lamp module is designed to contain most of these fragments, but 
use caution when removing it. Before replacing a ruptured lamp, clean 
the lamp compartment and dispose of cleaning materials. Wash hands 
after lamp replacement.
Hg – Lamp contains mercury. Manage in accordance with local 
disposal laws. See www.lamprecycle.org.
4Loosen the two captive screws on the lamp door and lift the door off.
5Loosen the two captive screws that attach the lamp housing to the 
projector.
6Carefully remove the lamp housing. Dispose of the lamp in an 
environmentally proper manner.
7Install the new lamp housing and tighten the screws.
8Replace the lamp door.
9Plug in the power cord and press the Power button to turn the projector 
back on.
10To reset the lamp hour timer, navigate to the Status and Service menu 
and select Reset Lamp Hours. See 
page 32 for details.
loosen screw
loosen screw 
						

							36
INDEX
Numerics
16x9 vs 4x3 12
A
Advanced menu 29
Aspect Ratio 12, 28, 30
B
Blank Screen 31
Brightness 28
BrilliantColor 29
C
cable box 12
cleaning the lens 33
Color 28
Color Space 29
Color Temperature 29
Computer In connector 9
connecting
computer 9
video device 12
connector panel 4
connectors on projector 7
contacting InFocus 21
Contrast 28
Custom key 25, 30
customer service contact information 21
customizing the projector 26
D
DVDs 28
F
Factory Reset 32
focus 11
H
HDTV 6, 28
Horizontal 29
I
image
optimization 25
size 5
K
keypad buttons 24
keystone 28
keystone, adjusting 11
L
lamp hours, resetting 35
Language 30
laptop video port activation 10
LEDs 14
leveling foot 11
M
maintaining the projector 33
Menu button 27
menu usage 27
O
optimizing images 25
optimizing video 26
Overscan 29
P
PC Screen Saver Off 31
Phase 29
Picture menu 28
positioning the projector 5
Power connector 9
power cord 9
Power Save 30
Power-up Source 30
presentation features 25
projection distance 5
projector
connecting computers 9
connecting video devices 12 
						

							37
connector panel 4
customization 26
image size 5
keypad buttons 24
language 30
maintenance 33
menus 27
offset 5
positioning 5
registering 3
reset 32
safety considerations 2
security lock 33
setting up 5
shutting down 14
Status Indicator Panel 14
troubleshooting problems 14
R
Rear 30
registering your projector 3
remote control 22
resetting the projector 32
S
Screen Aspect 12
Screen Save 14, 30
security lock 33
Service 32
Service Code 32
Settings menu 30
sharpness 28
shutting down the projector 14
Sources 30
Status Indicator Panel 14
S-video connector 13
T
Tint 28Tracking 29
troubleshooting 14
TV tuner 12
U
USB 9
V
Vertical 29
video devices, connecting 13
video optimizing 26
Video Standard 30
Volume button 23
W
warranty 21
Z
zoom 11