InFocus Projector Work Big In1100 User Manual

IN1100   IN1102
Regulatory models W1100 and W1102 

1
Declaration of Conformity
Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 
97070 USA
 European Office: Louis Armstrongweg 110, 1311 RL Almere, The Netherlands
We declare under our sole responsibility that this projector conform to the 
following directives and norms:
EMC Directive 2004/108/EC
EMC: EN 55022EN 55024
EN 61000-3-2
EN 61000-3-3Low Voltage Directive 2006/95/EC
Safety: IEC 60950-1: 1st Edition
Trademarks
DisplayLink is a trademark of DisplayLink Corporation.Apple,...

2
Table of Contents
Introduction 3
Positioning the projector 5
Projector and device connector guide 6
Connecting a computer source 9
Required computer connections  
(DisplayLink or VESA) 9
Optional computer connections 9
Displaying an image 10
Adjusting the image 11
Connecting a video device 12
Video device connections 13
Composite video connection 13
S-video connection 13
VESA connection 13
Component video connection 13
Shutting down the projector 14
Troubleshooting your setup 14
Using the remote...

3
Introduction
Your new digital projector is simple to connect, easy to use, and 
straightforward to maintain. It is a versatile projector that is flexible enough 
for business presentations and home video viewing too. The IN1100 has 
native XGA 1024x768 resolution, and the IN1102 has WXGA 1280x800 
resolution. This guide applies to all products. They are compatible with a 
wide variety of computers and video devices.
Product specifications
To read the latest specifications on your multimedia projector,...

4
Connector panel
The projector provides the following connectors:
•VESA computer
•S-video
•Composite video
• Audio in
• USB DisplayLink connector, for computer video input. This USB 
connection also provides slide advance (and mouse control when used 
with an optional remote control only)
audio in
S-video computercomposite 
video
security lock DisplayLink 
connector 

5
Positioning the projector
To determine where to position the projector, consider the size and shape of 
your screen, the location of your power outlets, and the distance between the 
projector and the rest of your equipment. Here are some general guidelines:
• Position the projector on a flat surface at a right angle to the screen. The 
projector must be at least 4.9 feet (1.5m) from the projection screen.
• Position the projector within 10 feet (3m) of your power source and 
within 6 feet (1.8m) of...

6
Projector and device connector guide
The following illustration and table should help you find the connectors to 
use and obtain the best resolution possible from your input devices, such as 
computers, standard VCRs, DVD players (progressive and interlaced), 
HDTV sources (1080i, 1080p and 720p HDTV formats), TV and satellite 
tuners, camcorders, video games (progressive and interlaced), and laser 
disc players.
audio in
S-video computercomposite 
video
security lock DisplayLink 
connector 

7
Video DeviceVideo 
CompatibilityIf Your Device 
Connector Is
Attach to Adapter 
or Labeled 
Connector on 
Projector
For Setup Instructions, seeComments
Standard Broadcast TV (not 
HDTV) via: cable, digital 
cable, satellite TV, DVD, or 
VCR NTSC, PAL, and 
SECAM formatsComposite video 
or S-videoVideo 2
or Video 1
Composite video connection on 
page 13.
S-video connection on page 13
Not for progressive 
(i.e. HDTV) sources. 
See 
page 8.
Standard Video Camera
NTSC, PAL, and 
SECAM formatsComposite...

8
HDTV
(High Definition TV)
1080i, 1080p, 720p
Component 480i
VGA
Component video
Computer 2
Computer 2 via 
optional VESA to 
Component adapter
VESA connection on page 13
Component video connection on 
page 13 
Progressive DVD 
1080i, 1080p, 720p
Component 480p 
and 480i
VGA
Component video
Computer 2
Computer 2 via 
optional VESA to 
Component adapter
VESA connection on page 13
Component video connection on 
page 13 
Progressive Video Game
1080i, 1080p, 720p
Component 480p 
and 480i
VGA
Component...

9
Connecting a computer source
Required computer connections (DisplayLink or 
VESA)
If your computer has Windows XP SP2 or newer*, connect the USB cable 
between your computers USB port and the projectors DisplayLink 
connector, then follow the instructions on the screen. See the DisplayLink 
Manager Users Guide for more information.
* For the latest information about support for other operating systems 
(including Apple), go to www.infocus.com/support/displaylink.
Or, connect one end of the provided...