InFocus Projector SP1080 User Manual

							10
Connecting a video device
You can connect video devices such as VCRs, DVD players, camcorders, digital 
cameras, video game consoles, HDTV receivers, and TV tuners to the projector. 
You can connect the audio directly to the projector to get sound from the built-in 
speaker, or you can bypass the projector’s audio system and connect the audio 
directly from your source to a stereo or home theater system.
You can connect the projector to most video devices that can output video. You 
cannot directly connect the coaxial cable that enters your house from a cable or 
satellite company, the signal must pass through a tuner first. Examples of tuners are 
digital cable boxes, VCRs, digital video recorders, and satellite TV boxes. Basically, 
any device that can change channels is considered a tuner.
Before connecting your projector, you should decide which aspect ratio you want 
to use. The projector’s Aspect Ratio setting is accessed through the Resize button 
on the remote or through the projector’s Basic Menu. See 
page 25 for more 
information.
HDMI connection
HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI 
provides an interface between sources, such as set-top boxes, DVD players, and 
receivers and your projector. Plug an HDMI cable into the video-out connector on 
the video device and into the HDMI connector on the projector.
VGA connection
If your video device has a 15-pin VGA output, plug one end of the included 
computer cable into the VGA connector on your video source. This connector 
may be labeled “To Monitor” on the video source. Plug the computer cable into 
the Computer 1 connector on the projector.
Component video connection
If your HD video device has component connectors, an optional Component to 
VGA adapter can be used. Plug the component cable into the video device. Plug 
the other end of the component cable into the adapter and plug the adapter into 
the Computer 1 connector.
Audio
For audio, connect a 3.5mm stereo cable to the Audio 1/Audio 2 connector on the 
projector and to your source. If your source uses RCA audio connectors, a Y-cable 
or adapter may be used. (Note: A separate audio connection is not required for 
HDMI source inputs.) 
						

							11
Shutting down the projector
Auto Off Time
The projector also has an Auto Off Time feature that automatically turns the 
projector off after no active sources are detected and no user interaction with the 
projector is performed for 30 minutes. By default, this feature is off. You can 
change the length of time, see 
page 29.
Turning off the projector
To turn the projector off, press the Power button on the remote or keypad. The 
lamp turns off and the Power LED blinks amber for 30 seconds while the fans 
continue to run to cool the lamp. If the Power Saving Mode feature is on and when 
the lamp has cooled, the LED lights amber and the fans stop. If the Power Saving 
Mode feature is off and when the lamp has cooled, the LED blinks green and the 
fans stop. Unplug the power cable to completely power off the projector.
Troubleshooting your setup
If your image appears correctly on the screen, skip to the next section. If it does 
not, troubleshoot the setup.
The Status Indicator Lights on top of the projector indicate the operational state of 
the projector and can help you with troubleshooting.
Table 2: Status Indicator Lights
Operational ModeStatus Indicator Lights
Normal operationPOWER: Solid greenTEMP: OffLAMP: Off
Powering upPOWER: Blinks greenTEMP: OffLAMP: Off
Powering downPOWER: Blinks amberTEMP: OffLAMP: Off
Standby with Power Saving Mode offPOWER: Blinks greenTEMP: OffLAMP: Off
Standby with Power Saving Mode onPOWER: Solid amberTEMP: OffLAMP: Off
Fan failurePOWER: Blinks amberTEMP: Blinks redLAMP: Blinks red
Lamp failed to ignitePOWER: Solid amberTEMP: Blinks redLAMP: Blinks red
Lamp is at the end of its lifePOWER: Solid amberTEMP: Blinks redLAMP: Blinks red
Projector is overheatingPOWER: Solid amberTEMP: Blinks redLAMP: Off 
						

							12
Problem SolutionResult
No start up screenPlug power cord into the projector
press the Power button
Correct image
Only start up screen appearsPress the SOURCE button
activate laptop’s external portComputer image projected
Startup
Screen
A
Startup
Screen
Restart laptop
A
A 
						

							13
ProblemSolutionResult
No computer image, just the words “Signal out of 
range” Press the Auto Image button on remote
Adjust computer refresh rate (Windows 7: Control 
Panel > Display > Screen Resolution > Advanced 
Settings > Adapter tab). Varies per operating system.
You may also need to set a different resolution on your 
computer, as shown in the following problem, “image 
fuzzy or cropped”
Computer image projected
Only my laptop’s background appears, not the 
Desktop iconsChange the Multiple Display setting to Duplicate these 
displays (Windows 7: Control Panel > Display > Screen 
Resolution). Varies per operating system. Background and Desktop projected
A
Signal out of
 the rangeA
A
A
AA
A 
						

							14
Image fuzzy or cropped Change the computers Resolution setting to match 
the projectors resolution (Windows 7: Control Panel > 
Display > Screen Resolution). Varies per operating 
system. Image clear and not cropped
Image not centered on screenMove projector, adjust heightCorrect image
Problem Solution Result
AAA
Adjust horizontal or 
vertical position in 
Advanced Menu > 
Image > PC... menu 
						

							15
Image not squareAdjust Keystone on keypadSquare image
Image does not fit 4:3 or 16:9 screenChange aspect ratio to 4:3 or 16:9 in Basic Menu > 
Aspect Ratio menu
Correct image
Image upside downTurn off Ceiling Mount in Basic menuCorrect image
Problem Solution Result
A 
						

							16
Image reversed left to rightTurn off Rear Project in Advanced Menu > Setup > 
Image Setup... menuCorrect image 
The video embedded in my PowerPoint presentation 
does not play on the screenTurn off the internal LCD display on your laptopEmbedded video plays correctly
Problem Solution Result
A
AB
ABAB 
						

							17
Lamp won’t turn on, the projector is overheatingMake sure vents aren’t blocked, turn off the projector 
and allow it to cool for one minute Lamp turns on
“Replace lamp” message appears at startup, lamp 
won’t turn onLamp must be replaced (see page 31)Lamp turns on
Problem Solution Result
Overheating 
indicator
Startup
Screen
lam
r
Startup
Screen 
						

							18
Still need assistance?
If you need assistance, visit our website at www.infocus.com/support or call us. See 
the Quick Start Guide for support contact information.
This product is backed by a limited warranty. An extended warranty plan may be 
purchased from your dealer. When sending the projector in for repair, we 
recommend shipping the unit in its original packing material, or having a 
professional packaging company pack the unit. Please insure your shipment for its 
full value. 
						

							19
Using the remote control
The remote uses two (2) AAA batteries (not provided). They are easily installed by 
removing the cover from the remote’s back, aligning the + and - ends of the 
batteries, sliding them into place, and then replacing the cover.
Caution: 
• When replacing the remote batteries, be aware that using batteries other 
than AAA batteries may risk severe damage to the remote. When disposing 
of the batteries, be sure to do so in an enviromentally proper manner.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Ensure the batteries polarity (+/-) is aligned correctly.
• Do not mix new and old batteries together, or mix different types of batteries 
together.
• Replace the batteries as soon as they run out.
• Remove batteries from the remote control when storing or not in use for a 
prolonged period.
To operate, point the remote at the front of the projector (not at the computer). 
The range of optimum operation is about 15 feet (4.5m).
Press the remote’s Power button to turn the projector on and off (see page 8 for 
shutdown info).
Press the remote’s Menu button to open the projector’s menu system. Use the 
arrow buttons to navigate, and the Select button to select features and adjust 
values in the menus. See 
page 24 for more info on the menus.
The remote also has:
• Volume buttons adjust the sound.
• Custom button that can be assigned to a special function, like Blank Screen or 
Freeze (see 
page 27).
• Source button brings up a menu of all possible sources allowing the user to 
switch the active source.
• Blank button to blank the screen.
• Presets button to select stored settings (see page 25).
• Mute button to silence the audio.
• Auto Image button to resynch the projector to the source.
• Resize button to switch among aspect ratios (see page 25).
• Help button to get help with connecting sources and improving the picture.
• ESC button to go back to previous OSD menu.
• PC button to cycle through the computer sources.
• Video button to cycle through the video sources.
• Keystone buttons adjust the squareness of the image
• Magnify buttons magnify and reduce the projected picture size.
• Freeze button to pause the projected image.
• Overscan button is not applicable to the SP1080.
• AV Mute button blanks the projected image and mutes audio.
Troubleshooting the remote
• Make sure the batteries are installed in the proper orientation and are not 
dead.
• Make sure you’re pointing the remote at the projector or the screen, not the 
computer, and are within the remote range of 15 feet (4.5m). For best results, 
point the remote at the projector.
navigation 
buttons