InFocus Projector Lp540 User Manual

							41
AppendixAccessoriesNOTE: Use only approved accessories. Standard Accessories
(ship with the projector)
Part Number
Shipping Box (with packaging) 111-0053-xx
Carry Case 110-0793-xx
Computer Cable 6 ft (1.8 m) SP-DVI-A
Audio/Video Cable 6 ft (1.8 m) 516-0051-xx
Audio Cable 6 ft (1.8 m) 210-0118-xx
Power Cable*  516-0052-xx
Navigator Remote 590-0728-xx
Projection Lamp Module (included 
in projector)SP-LAMP-017
Lens Cap 340-1234-xx
Lens Cap Tether 321-0192-xx
Quick Setup card 009-0878-xx
User’s Guide with CD 010-0497-xx
Safety Card 009-0659-xx
Color-coded Cable Ties, 3 set SP-CABLETIES
SCART Adapter* 301130
*country-dependent
Optional Accessories  Part Number
Shipping Case (ATA approved)  CA-ATA-019
Projector Mount SP-CEIL-011
False Ceiling Plate for Projector Mount SP-LTMT-PLT
Extension Arm for Projector Mount 
26” - 47”SP-LTMT-EXTP
Organizer Carry Case CA-C230
DVI-D Cable 6 ft (1.8 m) SP-DVI-D
M1 to Component Adaptor SP-M1-ADPT
LiteShow Wireless Connection LP-LITESHOW
ProjectorNet Software (LP640 only) SW-PN2-1CD
Audio/Video Cable, 30 ft (9m) SP-AV30
Projector Cable Lock System SP-LOCK-B
50” Diagonal Screen (portable) A650
60” Diagonal Screen (portable) HW-DLXSCRN
84” Diagonal Wall/Ceiling Mounted Screen HW-WALLSCR84
Replacement Lamp Module SP-LAMP-017
RF Presenter Remote Control HW-PRESENTER-RF
IR Presenter Remote Control HW-PRESENTER
IR Conductor + Remote Control HW-CONDUCTOR+ 
						

							42
Red LED behavior and projector errorsIf the projector is not functioning properly and the red LED is blinking, con-
sult Ta b l e  2 to determine a possible cause. There are two second pauses 
between the blinking cycles. Visit our website for more details on the red 
LED error codes. See the inside back cover for contact information.
Projected image sizeNOTE: Visit our website for an interactive image size calculator.
Table 2: 
Red LED Behavior Explanation
One (1) blink The lamp wont strike after five (5) 
attempts. Check the lamp and lamp door 
installations for loose connections.
Two (2) blinks The lamp counter hours have exceeded 
lamp life hours. Replace the lamp and 
reset the lamp hours counter.
Three (3) blinks The projector has shut down the lamp. 
Replace the lamp. Contact Technical Sup-
port for repair if replacing the lamp does 
not solve the problem.
Four (4) blinks The fan has failed. Contact Technical Sup-
port for repair.
Five (5) blinks The projector is overheating. Check for a 
blocked air vent. Contact Technical Sup-
port for repair if clearing the air vents 
does not solve the problem.Table 3: 
Image sizes 
Distance 
to screen 
(feet/m) Minimum 
Diagonal
(feet/m)
throw
 ratio 1.53
Maximum 
Diagonal
(feet/m)throw ratio 1.28
Minimum 
Horizontal
(feet/m)throw ratio 1.91
 Maximum
Horizontal 
(feet/m)throw ratio 1.60
5/1.5 3.3/1 4/1.2 2.6/0.8 3.2/1
10/3 6.5/2 7.8/2.4 5.2/1.6 6.3/1.9
15/4.6 9.8/3 11.7/3.6 7.8/2.4 9.3/2.8
20/6.1 13/4 15.5/4.7 10.4/3.2 12.4/3.8
30/9.1 19.5/5.9 23.2/7.1 15.6/4.8 18.6/5.7
32.8/10 21.3/6.5 25.4/7.7 17/5.2 20.3/6.2 
						

							43
Numerics
1024x768 resolution 5
A
About 35
advancing PowerPoint slides 7
Aspect Ratio 35
audio 26
Audio In connector 7, 13
audio volume 15
Auto Image 35
Auto Power 33
B
Blank 35
Blank screen 34
blinking green 16
blinking red 16
Brightness 12
C
cables
optional 41
standard 41
cleaning the dust filter 40
cleaning the lens 37
Color 15
colors are incorrect 21
Computer 2 connector 8
computer connections
optional 7
required 7
computer image
optimize 27
troubleshooting 17
connector panel 6contacting InFocus 23
Contrast 12, 15
custom logo
startup screen 34
customer service contact information 23
D
Default gateway 36
DHCP 36
Display Messages 33
displaying
computer image 9
PiP 35
video image 14
Drivers 10
USB 11
Windows 98 11
dust filter, cleaning 40
E
Effect Key 35
elevator foot 12
F
first time use
driver installation 10
focus 12, 15
Freeze 35
fuzzy image 19 
						

							44
I
image
display computer 9
display video 14
image does not fit screen 20
image not centered 23
image not sharp 20
image not square 20
image reversed 21
image size matrix 42
image u
pside down 21
IP Address 36
K
Keystone 12
keystone 30
L
lamp replacement 38
lamp won’t turn on 22
Language 36
laptop
connecting 7
external video port 9
LED
blinking green 16
blinking red 22
solid green 16
solid red 22
LED behavior 16
lens, cleaning 37
leveling foot 12
lock, security 40M
Main menu 29
Mask 35
menu system 29
Monitor connector 7
Mute 35
N
Network 36
Network connector 8
Network Info 36
no computer image 18
no startup screen 17
O
only startup screen appears 17
optional accessories 41
P
Picture in Picture 35
Picture menu 30
PiP 35
power cable 7, 13
Power Save 33
PowerPoint, advancing slides 7
presentation features 27
projected image sizes 42
projector
adjusting the height 12, 14
connector panel 6
customizing 28
optional accessories 41
positioning 12
shutdown 16
standard accessories 41
troubleshooting problems 16 
						

							45
R
Rear 33
remote control 25
advancing slides 25
Effect key 25
not working 19
Previous/Next buttons 25
replacing the lamp 38
Reset 36
resetting the lamp timer 39
RS-232 control 8
S
Screen Save 16
security lock 40
serial connection 8
Settings menu 33
shutting down the projector 16
solid green 16
solid red 16
Source troubleshooting 17
Sources 33
speakers, connecting 26
standard accessories 41
startup logo 34
Subnet mask 36
S-video connector 13
T
Tint 15
Troubleshooting 16 - 23
U
USB drivers 11
USB, connecting 7V
VESA connector 8
Video button 14
video connections
optional 13
standard 13
Video connector 13
video images, optimizing 28
W
warranty 23, 46
Windows 2000 11
Windows 98 10
Windows ME, XP 11
wireless projection 6
X
XGA 5
Z
zoom 12, 15, 35
K