InFocus Projector IN8606HD User Manual
Have a look at the manual InFocus Projector IN8606HD User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
IN8606HD User’s Manual –44 – Audio Problems Problem: There is no sound 1. Adjust the volume on the remote control. 2. Adjust the volume of the audio source. 3. Check the audio cable connection. 4. Test the source audio output with other speakers. 5. Have the projector serviced. Problem: The sound is distorted 1. Check the audio cable connection. 2. Test the source audio output with other speakers. 3. Have the projector serviced. Having the Projector Serviced If you are unable to solve the problem, you should have the projector serviced. Pack the projector in the original carton and contact InFocus S upport at www.infocus.com/support or call us.
IN8606HD User’s Manual – 45 – HDMI Q & A Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI cable? Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High- Speed cables. ˙ Standard (or “category 1”) HDMI cables have be en tested to perform at speeds of 75Mhz or up to 2.25Gbps, which is the equivalent of a 720p/1080i signal. ˙ High Speed (or “category 2”) HDMI cables have b een tested to perform at speeds of 340Mhz or up to 10.2Gbps, which is the highest bandwid th currently available over an HDMI cable and can successfully handle 1080p signals including those at increased color depths and/or increased refresh rates from the Source. High-Speed cables are also able to accommodate higher resolution displays, such as WQXGA cinema monitors (resolution of 2560 x 1600). Q. How do I run HDMI cables longer than 10 meters(32.81ft)? There are many HDMI Adopters working on HDMI solutions that extend a cable’s effective distance from the typical 10 meter(32.81ft) r ange to much longer lengths. These companies manufacture a variety of solutions that include active cables (active electronics built into cables that boost and extend the cable’s signal), repeaters, amplifiers as well as CAT5/6 and fiber solutions. Q. How can I tell if a cable is an HDMI certified cable? All HDMI products are required to be certified by the manufacturer as part of the HDMI Compliance Test Specification. However, ther e may be instances where cables bearing the HDMI logo are available but have not been properly tested. HDMI Licensing, LLC actively investigates these instances to ensure that the HDMI trademark is properly used in the market. We recommend that consumers buy their cables from a reputable source and a company that is trusted. For more details, go to the HDMI website at: http://www.hdmi.org/learningc enter/faq.aspx#49
IN8606HD User’s Manual –46 – SPECIFICATIONS Specifications Model IN8606HD Display type 0.65 DMD 1080P, DC3,S600 with DDP4422 ASIC Resolution 1080p 1920x1080 Projection distance 1.2 ~ 10 m ( 3.94ft ~ 32.81ft ) Projection screen size 25.9 ~ 324.9 ( 65.79cm ~ 825.25cm ) Projection lens Manual Focus/Manual Zoom Zoom ratio 1.5x Vertical keystone ti+/- 40 degrees Projection methods Front, Rear, Desktop/Ceiling (Rear, Front) Data compatibility VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA, WUXGA, Mac SDTV/EDTV/ HDTV 480i, 480p, 576i, 576p, 720p, 1080i, 1080p Video compatibility NTSC, PAL, SECAM H-Sync 15, 31~91.4KHz V-Sync 24~30Hz, 47~120Hz Safety certification FCC-B, cUL, UL, CB, CE, C-tick, CCC, PSB, PCT, TUV-GS, UL-S Operation temperature 5° ~ 35°C ( 41° ~ 95°F) Dimensions 285.1 mm (W) x 264.1 mm (D) x 130.4 mm (H) (11.22” x 10.40” x 5.13”) AC Input AC Universal 100-240V Power consumption Normal ：300W,
IN8606HD User’s Manual – 47 – Projection Distance vs. Projection Size Projection Distance and Size Table IN8606HD IMAGE DIAGONAL （MM/INCH） IMAGE WIDTH (MM/INCH) IMAGE HEIGHT (MM/INCH) PROJECTION DISTANCE （MM/INCH） FROM PROJECTION DISTANCE （MM/INCH） TO OFFSET-A ( MM/INCH ) 1524 / 60 1328.2 / 52.29 747.3 / 29.42 1846.3 / 72.7 2776.1 / 109.3 112.1 / 4.4 1778 / 70 1549.7 / 61.01 871.7 / 34.32 2154 / 84.8 3238.8 / 127.5 130.8 / 5.1 1828.8 / 72 1593.9 / 62.75 896.6 / 35.3 2215.6 / 87.2 3331.3 / 131.2 134.5 / 5.3 2032 / 80 1771.1 / 69.73 996.2 / 39.22 2461.7 / 96.9 3701.5 / 145.7 149.4 / 5.9 2133.6 / 84 1859.5 / 73.21 1046 / 41.18 2584.8 / 101.8 3886.6 / 153 156.9 / 6.2 2286 / 90 1992.4 / 78.44 1120.6 / 44.12 2769.5 / 109 4164.2 / 163.9 168.1 / 6.6 2438.4 / 96 2125.2 / 83.67 1195.6 / 47.07 2954.1 / 116.3 4441.8 / 174.9 179.3 / 7.1 2540 / 100 2213.9 / 87.16 1245.4 / 49.03 3077.2 / 121.1 4626.8 / 182.2 186.8 / 7.4 3048 / 120 2656.6 / 104.59 1494.3 / 58.83 3692.6 / 145.4 5552.2 / 218.6 224.1 / 8.8 3429 / 135 2988.6 / 117.66 1681.2 / 66.19 4154.2 / 163.6 6246.2 / 245.9 252.2 / 9.9 3810 / 150 3320.8 / 130.74 1867.9 / 73.54 4615.8 / 181.7 6940.3 / 273.2 280.2 / 11 5080 / 200 4427.7 / 174.32 2490.5 / 98.05 6154.4 / 242.3 9253.7 / 364.3 373.6 / 14.7
IN8606HD User’s Manual –48 – Timing Mode Table SIGNAL RESOLUTIONH-SYNC ( KHZ ) V-SYNC ( HZ ) COMPOSITE S_VIDEO COMPONENT RGB (ANALOG) HDMI (DIGITAL) NTSC － 15.734 60 ○ － － － PAL/SECAM － 15.625 50 ○ － － － 640 x 400 37.9 85.08 － － ○ ○ 720 x 400 31.5 70.1 － － ○ ○ 720 x 400 37.9 85.04 － － ○ ○ 640 x 480 31.5 60 － － ○ ○ 640 x 480 37.9 72.8 － － ○ ○ 640 x 480 37.5 75 － － ○ ○ 640 x 480 43.3 85 － － ○ ○ 800 x 600 35.2 56.3 － － ○ ○ 800 x 600 37.9 60.3 － － ○ ○ 800 x 600 46.9 75 － － ○ ○ 800 x 600 48.1 72.2 － － ○ ○ 800 x 600 53.7 85.1 － － ○ ○ 800 x 600 76.3 120 － － ○ ○ 1024 x 576 35.8 60 － － ○ ○ 1024 x 600 37.3 60 － － ○ ○ 1024 x 600 41.5 65 － － ○ ○ 1024 x 768 48.4 60 － － ○ ○ 1024 x 768 56.5 70.1 － － ○ ○ 1024 x 768 60 75 － － ○ ○ 1024 x 768 68.7 85 － － ○ ○ 1024 x 768 97.6 120 － － ○ ○ 1024 x 768 99 120 － － ○ ○ 1152 x 864 67.5 75 － － ○ ○ 1280 x 720 45 60 － － ○ ○ 1280 x 720 90 120 － － ○ ○ 1280 x 768 47.4 60 － － ○ ○ 1280 x 768 47.8 59.9 － － ○ ○ 1280 x 800 49.7 59.8 － － ○ ○ 1280 x 800 62.8 74.9 － － ○ ○ 1280 x 800 71.6 84.9 － － ○ ○ 1280 x 800 101.6 119.9 － － ○ ○ 1280 x 1024 64 60 － － ○ ○ VESA 1280 x 1024 80 75 － － ○ ○
IN8606HD User’s Manual – 49 – SIGNAL RESOLUTIONH-SYNC ( KHZ ) V-SYNC ( HZ ) COMPOSITE S_VIDEO COMPONENT RGB (ANALOG) HDMI (DIGITAL) 1280 x 1024 91.1 85 － － ○ ○ 1280 x 960 60 60 － － ○ ○ 1280 x 960 85.9 85 － － ○ ○ 1360 x 768 47.7 60 － － ○ ○ 1400 x 1050 65.3 60 － － ○ ○ 1440 x 900 55.5 59.9 － － ○ ○ 1440 x 900 55.9 59.9 － － ○ ○ 1440 x 900 70.6 75 － － ○ ○ 1600 x1200 75 60 － － ○ ○ 1680 x 1050 64.7 59.9 － － ○ ○ 1680 x 1050 65.3 60 － － ○ ○ 1920 x 1200 74 60 － － ○ ○ 1920 x 1080 67.5 60 － － ○ ○ 640 x 480 35 66.7 － － ○ ○ 832 x 624 49.7 74.5 － － ○ ○ 1024 x 768 60.2 74.9 － － ○ ○ Apple Macintosh 1152 x 870 68.7 75.1 － － ○ ○ 480i 15.734 60 － ○ － ○ SDTV 576i 15.625 50 － ○ － ○ 576p 31.3 50 － ○ － ○ EDTV 480p 31.5 60 － ○ － ○ 720p 37.5 50 － ○ － ○ 720p 45 60 － ○ － ○ 1080i 33.8 60 － ○ － ○ 1080i 28.1 50 － ○ － ○ 1080p 27 24 － ○ － ○ 1080p 28 25 － ○ － ○ 1080p 33.7 30 － ○ － ○ 1080p 56.3 50 － ○ － ○ HDTV 1080p 67.5 60 － ○ － ○ O ：Frequency supported —：Frequency not supported The native resolution of the panel is 1920x1080 Resolutions listed above other than 1920 x 1080 (the native resolution of the proj ector) will be resized and displayed, however they may contain lines or uneven looking text. This is normal. A yellow background means that the resolution will be displayed in a 4:3 aspect ratio. A blue background means that these resolutions ma y display some video noise. This is normal.
IN8606HD User’s Manual Projector Dimensions 264.1mm [10.40] 285.1mm [11.22] 130.4mm [5.13]122.3mm [4.81] – 50 –
IN8606HD User’s Manual – 51 – REGULATORY COMPLIANCE FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipm ent is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual , may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Changes or modifications not expressly approved by the parties responsible for compliance could void the user’s authority to operate the equipment. Canada This class B digital apparatus complies with Canadian ICES-003. Safety Certifications FCC-B, cUL, UL, CB, CE, C-tick, CCC, PSB, PCT, TUV-GS, UL-S
IN8606HD User’s Manual –52 – APPENDIX I Serial Communication The following table describes the serial comm unication configuration that should be used when interfacing to CLI via the serial port. Windows HyperTerminal or ProComm are two tools that can be used to send CLI commands across the serial port. Setting Value Bits per second 19200 Data bits 8 Parity None Stop bits 1 Flow control None Emulation VT100 No Function Command RWMinMaxDefaultStep Parameter 1V AC Power On (Auto power on) APO RW 0 1 0 1 0:Disable; 1:Enable 3V Aspect Ratio ARZ RW 0 5 0 1 0:Fill 1:4:3 2:16:9 3:Letterbox 4:Native 5:2.35:1 4V Auto Image AIM W n/a 1 1 1 1:Enable 5V Auto Off Time AOT RW 0 36 6 1 0:Never 1~36 * 5 = ? min 1:5min 6:30min (Default) 36:180min 6V Auto Source ASC RW 0 1 1 1 0:Disable; 1:Enable 7V Blank Screen BLK RW 0 1 0 1 0:Disable; 1:Enable 9V Brightness BRT RW 0 100 50 1 Valid only when Display Mode = User 11V Projection (Ceiling mode) CEL RW 0 3 0 1 0:Front 1:Rear 2:Ceiling 3:Ceiling+Rear 12V Closed Captions: Non- Muted CLC RW 0 1 0 1 Off On (CC1) 14V Color CLR RW 0 100 50 1 Video S-Video only = satu- ration 15 (None) Color Space CSM RW 0 2 0 1 Valid only when Display Mode = User 0:Auto 1:RGB 2:YUV
IN8606HD User’s Manual – 53 – No Function Command RWMinMaxDefaultStep Parameter 16V Color Temp TMP RW 0 2 Source Specific 1 Valid only when Display Mode = User 0:Warm 1:Normal 2:Cold 17V Contrast CON RW 0 100 50 1 Valid only when Display Mode = User 18V Current Source SRC RW 0 13 0 1 0:VGA1 5:HDMI-1 6:HDMI-2 10:Component 12:Video 13:S-Video 21V Digital Zoom DZM RW -1010 0 1 -10~10 27V Error Condition ERR R n/an/a n/a n/a 0:No error 1:Lamp not lit after 5 At- tempts 3:Lamp went out unexpect- edly 4:Fan failure 5:Over- heating 8:DMD error 9:Color wheel 28V Factory Reset RST W n/a 1 1 1 1:reset 32V Freeze Screen FRZ RW 0 1 0 1 0:Disable 34V Gamma GTB RW 0 5 Source Specific 1 Valid only when Display Mode = User 0:1.8 1:2.0 2:2.2 3:2.4 4:B&W 5:Linear 40V Horz. Position HPS RW x x 0 1 RGB source only (HPS?) to get range 45V Lamp Hours in High Power Mode LMO R 0 9999 Displays the number of hours that the current lamp has run in High Power (Normal) mode. 46V Lamp Hours in Low Power Mode LME R 0 9999 Displays the number of hours that the current lamp has run in Low Power (Eco) mode. 47V Lamp Life LIF R n/a4000 240W lamp life 4000 49V Lamp Resets (Total number) LMR R 0 99990 1 62V Lamp Low Power IPM RW 0 1 0 1 1=ECO, 0=Normal