InFocus Projector IN8606HD User Manual

							IN8606HD User’s Manual 
5.  You can use the arrow buttons 
▲▼◄► 
either on keypad or IR remote control 
for password entry. You can use any 
combination including the same arrow 
five times, but five characters must be 
used.. 
Press the arrow buttons in any order to 
set the password. Push the  MENU 
button  to exit the  dialog box. 
6.  If the Security Lock is enabled, the 
user will be prompted to enter a 
password when the projectors power 
button is pressed. 
Enter the password in the order you 
set it on step 5. If you forget the 
password, please contact InFocus. 
Visit our website at 
www.infocus.com/support
 or call us.  
 
– 14  –  
						

							IN8606HD User’s Manual 
Adjusting the Projector Level 
Take note of the following when setting up the projector: 
  The projector table or stand should be level and sturdy. 
   Position the projector so that it is perpendicular to the screen. 
   Ensure the cables are in a safe location. You could trip over them.  
 
To adjust the angle of the picture, turn the tilt-adjuster right or left until the desired 
angle has been achieved. 
 
 
 
 
– 15  –  
						

							IN8606HD User’s Manual 
Adjusting the Zoom, Focus and Keystone 
1.  Use the Image-zoom  
control (on the projector 
only) to resize the 
projected image and 
screen size 
. 
2.  Use the Image-focus  
control (on the projector 
only) to sharpen the 
projected image 
. 
 
3.  Use the KEYSTONE  
buttons on the remote 
control to correct 
trapezoid image issues 
(wider top or bottom). 
 
4.  The keystone control 
appears on the display. 
Adjusting the Volume 
 
1.  Press the  Volume +/-  
buttons on the remote 
control.  
The volume control 
appears on the display. 
2.  Press the  MUTE button 
on the remote control to 
turn off the volume.  
 
– 16
  –  
						

							IN8606HD User’s Manual 
– 17  – 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you ma ke image adjustments and change various settings.  
Navigating the OSD 
You can use the remote contro l arrow buttons to navigate and  make changes to the OSD.  
 
1.  To enter the OSD, press the 
MENU button.  
2.  There are three menus.  Press the ◄►  buttons to 
move through the menus.  
3. Press the  ▲▼ buttons to 
move up and down in a 
menu.  
4. Press the  ◄► buttons to 
change setting values. 
5. Press the  MENU button to 
close the OSD or leave a 
submenu. 
 
Note: 
Depending on the video source, not all items in  the OSD are available. For example, the 
Horizontal/Vertical Position  items in the Computer menu can only be modified when connected 
to a PC. Items that are not availabl e cannot be accessed and are grayed out.  
  
						

							IN8606HD User’s Manual 
Setting the OSD Language 
Set the OSD language to your preference before continuing. 
1. Press the MENU button. Press the  ◄► buttons to navigate to Settings 1. Press the  ▲▼ 
buttons to move to the  Advanced 1  menu. 
 
2. Press  (Enter) or ►  to enter the Advanced 1 sub menu. Press the  ▲▼ buttons until 
Language is highlighted.  
 
3.  Press the arrow buttons until the language you want is highlighted.  
4. Press the  MENU button four times to close the OSD.   
 
– 18  –  
						

							IN8606HD User’s Manual 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
 
– 19  –  
						

							IN8606HD User’s Manual 
–20  – 
Image Menu  
Attention ! 
When image options are changed, the Display Mode changes to User. 
Press the MENU  button to open the  OSD menu. Press the  ◄► buttons to move to the  Image Menu. 
Press the ▲▼  buttons to move up and down in the  Image menu. Press the  ◄► buttons to enter and 
change setting values. 
 
ITEM DESCRIPTION 
Display Mode  Press the 
◄► buttons to enter and set the Display Mode.  
Note:  
1. Display Mode must be set to User in order to access the other Image menu items. 
2. ISF Day and ISF Night items only displa y when the ISF feature has been activated 
by your ISF technician.  
Brightness Press the  ◄► buttons to enter and adjust the display brightness. 
Contrast Press  the ◄►  buttons to enter and adjust the display contrast. 
Computer Press  (Enter) or  ► to enter the Computer menu. See  Computer Menu on page 21.
Auto Image  Press  (Enter) or 
► to automatically adjustment for phase, tracking, size and 
position. 
Advanced  Press  (Enter) or 
► to enter the Advanced menu. See  Advanced Feature on page 
22. 
Color Manager  Press  (Enter) or 
► to enter the color manager menu. See page 24 for more 
information on Color Manager .  
						

							IN8606HD User’s Manual 
Computer Menu 
Press the MENU button to open the  OSD menu. Press the  ◄► buttons to move to the  Image menu. 
Press the ▲▼  buttons to move to the  Computer menu and then press 
 (Enter) or  ►. Press the 
▲▼  buttons to move up and down in the  Computer menu. 
 
ITEM DESCRIPTION 
Horizontal Position  Press the ◄► buttons to enter and adjust the di splay position to left or right.  
Vertical Position Press the ◄► buttons to enter and adjust the  display position to up or down.  
Frequency Press the  ◄► buttons to enter and adjust the A/D sampling clock. 
Tracking Press  the ◄►  buttons to enter and adjust the A/D sampling dot. 
 
– 21  –  
						

							IN8606HD User’s Manual 
Advanced Features 
Press the Menu button to open the OSD menu. Press the  ◄► buttons to move to the  Image menu. 
Press the ▼▲  buttons to move to the  Advanced menu and then press 
 (Enter) or ►. Press the 
▼▲  buttons to move up and down in the  Advanced menu. 
 
ITEM DESCRIPTION 
Brilliant Color  Press the ◄► buttons to enter and adjus t the Brilliant Color value. 
Sharpness Press the  ◄► buttons to enter and adjust the display sharpness. 
Gamma Press  the ◄►  buttons to enter and adjust the gamma correction of the display. 
Color Temperature  Press the ◄► buttons to enter and adjust the color temperature. 
Video AGC  Press the 
◄► buttons to enter and enable or disable the Automatic Gain Control for 
video source. 
Video Saturation  Press the ◄► buttons to enter and adjust the video saturation. 
Video Tint  Press the ◄► buttons to enter and adjust the video tint/hue. 
White Balance  Press  (Enter) or 
► to enter the White Balance sub menu.  
See  White Balance  on page 23 
 
–22  –  
						

							IN8606HD User’s Manual 
White Balance 
Press the  (Enter) or ► button to enter the  White Balance sub menu. Press  ▼▲ to move up and 
down in the White Balance menu. 
 
ITEM DESCRIPTION 
R Gain  Press the ◄► buttons to adjust the Red Gain. 
G Gain  Press the ◄► buttons to adjust the Green Gain. 
B Gain  Press the ◄► buttons to adjust the Blue Gain.  
R Offset  Press the ◄► buttons to adjust the Red Offset. 
G Offset  Press the ◄► buttons to adjust the Green Offset. 
B Offset  Press the ◄► buttons to adjust the Blue Offset. 
– 23  –