InFocus Projector In5504 User Manual

Regulatory models: F5500, F5530
5500
010-0715-01
IN5502, IN5504, IN5532, IN5534  
User’s Guide 

1
Declaration of Conformity
Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Portland, 
Oregon 97223-8368 USA
We declare under our sole responsibility that this projector conforms to the 
following directives and norms:
EMC Directive 2004/108/EC
EuP Directive 2005/32/EC
EMC: EN 55022
 EN 55024
 EN 61000-3-2
 EN 61000-3-3
Low Voltage Directive 2006/95/EC
Safety: IEC 60950-1:2005, MOD
Trademarks
DisplayLink is a trademark of DisplayLink Corporation.
Apple, Macintosh, and PowerBook are trademarks...

2
Table of Contents
Introduction  5
Positioning the projector  7
Ceiling Mount  8
Cable management  8
Connecting power  9
Connecting a computer source  9
Optional computer connections  10
Displaying an image  11
Adjusting the image  12
Connecting a video device  13
Video device connections  13
Shutting down the projector  15
Troubleshooting your setup  15
Using the remote control  23
Using the audio  24
Using the keypad buttons  25
Optimizing computer images  25
Presentation features  25
Optimizing video...

3
Important Operating Considerations for Safety
• Refer to this guide for proper startup and shutdown procedures.
• Follow all warnings and cautions in this manual and on the projector.
• Do not block the lens with any object while the projector is being used. 
Blocking the light path can cause overheating and result in fire.
• Place the projector in a horizontal position no greater than 8 degrees off 
axis.
• Locate the projector at least 4 (1.2m) away from any heating or cooling 
vents.
• Do not block...

4
Follow these instructions to help ensure image quality and lamp life over 
the life of the projector. Failure to follow these instructions may affect the 
warranty. For complete details of the warranty, see the Warranty Booklet. 

5
Introduction
Your new digital projector is simple to connect, easy to use, and 
straightforward to maintain. It is a versatile projector that is flexible enough 
for business presentations and home video viewing, too. The IN5502 and 
IN5532 have WXGA 1280x800 resolution and the IN5504 and IN5534 have 
native WUXGA 1920x1200 resolution. This guide applies to all four 
products. They are compatible with a wide variety of computers and video 
devices.
Product Specifications
To read the latest...

6
Connector Panel
The projector provides both computer and video connection options, 
including:
•VGA computer (2)
•HDMI (2)
•S-video
•Composite video
• Component video
• BNC RGBHV and YPbPr for RGBHV, EDTV and HDTV
• Separate audio inputs for video and computer
• USB DisplayLink connector, for computer audio/video input. This 
USB connection also provides power out for the Wireless DisplayLink 
Projector Adapter.
The projector also provides the following connectors:
• Monitor out, to provide an image on...

7
Positioning the Projector
To determine where to position the projector, consider the size and shape of 
your screen, the location of your power outlets, and the distance between 
the projector and the rest of your equipment. Here are some general 
guidelines:
• Position the projector on a flat surface at a right angle to the screen. The 
projector (with the standard lens) must be at least 3 feet (0.9m) from the 
projection screen.
• Position the projector within 10 feet (3m) of your power source and...

8
Ceiling Mount
If you wish to install the projector on the ceiling:
• The projector must be installed by a qualified professional in order to 
ensure proper operation and reduce the risk of hazards or injury. It is 
not recommended you install the projector yourself.
• We strongly recommend using InFocus approved ceiling mounts for 
proper fitting, ventilation and installation.  Refer to the installation 
guide that comes with the InFocus Ceiling Mount Kit (p/n SP-CEIL-
INSTALL) for more information....

9
Connecting power
Connect the black power cord to the Power connector on the rear of the 
projector and to your electrical outlet. The Power light on the Status 
Indicator Panel (
page 15) turns amber.
NOTE: Always use the power cord that shipped with the projector.
Connecting a computer source
DisplayLink
If you have a Windows or Macintosh computer, connect the USB cable 
between your computers USB port and the projectors DisplayLink 
connector*. Then to begin installation of the DisplayLink software:...