Home > InFocus > Projector > InFocus Projector IN5316HDa User Manual

InFocus Projector IN5316HDa User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual InFocus Projector IN5316HDa User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							— 34 — 
    Settings 2 Menu  
    Press the  MENU button to open the  OSD menu. Press  ◄► to move to the  Settings 2 menu. Press 
    ▲▼  to move up and down in the  Settings 2 menu.  
     
    ITEM DESCRIPTION 
    Auto Source  Press  ◄► to enter and enable or disable  automatic source detection.  
    No Signal Power 
    Off (min.) Press 
    ◄► to enter and enable or disable automat ic shutdown of the lamp when no 
    signal is detected. 
    Auto Power On  Press 
    ◄► to enter and enable or disable automatic power On when AC power is 
    supplied. 
    Lamp Mode  Press 
    ◄► to enter and select the lamp mode for higher brightness or lower brightness 
    to save lamp life. 
    Reset All  Press   (Enter) / ► to reset all settings to default values. 
    Status  Press   (Enter) / 
    ► to enter the Status menu. See page  35 for more information on 
    Status . 
    Advanced 1  Press   (Enter) / 
    ► to enter the Advanced 1 menu. See  Advanced 1 Feature on 
    page  36. 
    Advanced 2  Press   (Enter) /  ► to enter the Advanced 2 menu.  Advanced 2 Feature on page 39  
    						
    							  – 35 – 
    Status 
    Press ▲▼ to move up and down in the Settings 2 menu. Select the Status menu and press Enter 
    or ► to enter. 
     
    ITEM DESCRIPTION 
    Active Source Displays the active source. 
    Video Information Displays resolution/video information for RGB source and color standard for Video 
    source. 
    Lamp Hours Lamp hour used information is displayed (ECO, Normal, Boost). 
    Software Version Displays the system software version. 
    Serial Number Displays the serial number of this projector. 
      
    						
    							— 36 — 
    Advanced 1 Feature 
    Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press 
    ▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down 
    in the Advanced 1 menu. Press ◄► to enter and change values for setting. 
     
    ITEM DESCRIPTION 
    Menu Position Press ◄► to enter and select different OSD location. 
    Translucent Menu Press ◄► to enter and select OSD background translucent level.  
    Low Power Mode 
    Press ◄► to enter and select Low Power Mode W Off, Low Power, On by Lan or VGA 
    Out Mode. Low Power mode uses less than 0.5W of power in standby mode and 
    disables LAN functionality. If you want to be able to turn on the projector via LAN and 
    use less than 6W of power in standby mode, choose On by LAk instead. 
    Fan Speed 
    Press ◄► to enter and toggle between Normal and High fan speeds.  
    Note: We recommend selecting high speed in high temperatures, high humidity, or 
    high altitude (higher than 1500m/4921ft) areas. 
    Lamp Hour Reset After replacing the lamp, this item should be reset. See page 37 for more information 
    on Lamp Hour Reset. 
    Projector ID  Press ◄► to enter and adjust a two digit projector ID from M0 through 9U. 
    Network Press  (Enter) / ► to enter the Network menu. See page 37 for more information on 
    Network. 
    Video Overscan Press ◄► to enter and turn Video Overscan on or off. 
       
    						
    							  – 37 – 
    Lamp Hour Reset 
     
    Please refer to Resetting the Lamp Timer on page 44 to reset the lamp hour counter. 
    Network 
     
    ITEM DESCRIPTION 
    Network State Displays the network connection status. 
    DHCP 
    Press ◄► to turn DHCP On or Off.  
    Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, 
    and DNS fields. 
    IP Address  Enter a valid IP address if DHCP is turned off. 
    Subnet Mask Enter a valid Subnet Mask if DHCP is turned off. 
    Gateway Enter a valid Gateway address if DHCP is turned off. 
    DNS Enter a valid DNS name if DHCP is turned off. 
    Apply Press  (Enter) / ► to confirm settings. 
     
       
    						
    							— 38 — 
    Controlling the projector remotely 
     
     
    To control your projector remotely, use one of the supported external devices listed below, or use 
    RS232 using a TelNet utility, such as HyperTerminal. 
     Crestron is a registered trademark of Crestron Electronics, Inc. of the United States. 
     Extron is a registered trademark of Extron Electronics, Inc. of the United States. 
     AMX is a registered trademark of AMX LLC of the United States. 
     PJLink applied for trademark and logo registration in Japan, the United States of America, and 
    other countries by JBMIA. 
    Supported External Devices 
    This projector supports specified Crestron Electronics controller commands and related software (ex, 
    RoomView ® ). 
    http://www.crestron.com/ 
    This projector supports AMX ( Device Discovery ). 
    http://www.amx.com/ 
    This projector supports Extron device(s). 
    http://www.extron.com/ 
    This projector supports all commands of PJLink Class1 (Version 1.00). 
    http://pjlink.jbmia.or.jp/english/ 
     
    For detailed information about the diverse types of external devices which can be connected to the 
    LAN/RJ45 port to control the projector, as well as related control commands, go to 
    www.infocus.com/support.   
    						
    							  – 39 – 
    Advanced 2 Feature 
    Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press 
    ▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down 
    in the Advanced 2 menu. Press ◄► to enter and change values for setting. 
     
    ITEM DESCRIPTION 
    Sleep Timer (min) Press ◄► to enter and set Sleep timer. The projector automatically turns off after the 
    preset period of time. 
    Source Filter Press  (Enter) / ► to enter the Source Filter menu. See page 40 for more 
    information on Source Filter.   
    						
    							— 40 — 
    Source Filter 
    Press the ENTER button to enter the Source Filter sub menu. 
     
    ITEM DESCRIPTION 
    DVI Press ◄► to enter and enable or disable the DVI source. 
    HDMI Press ◄► to enter and enable or disable the HDMI source. 
    DisplayPort Press ◄► to enter and enable or disable the Displaymort source. 
    VGA1 Press ◄► to enter and enable or disable the VGA1 source. 
    VGA2 Press ◄► to enter and enable or disable the VGA2 source. 
    BNC Press ◄► to enter and enable or disable the BNC source. 
    Component Video Press ◄► to enter and enable or disable the Component Video source. 
    p-Video Press ◄► to enter and enable or disable the S-Video source. 
    Composite Video Press ◄► to enter and enable or disable the Composite Video source. 
      
    						
    							  – 41 – 
    MAINTENANCE AND SECURITY 
    Replacing the Projection Lamp 
    The projection lamp should be replaced when it burns out. Be sure to use the InFocus lamp module 
    designed for this projector. You can order new lamps from www.infocusstore.com (in select areas), your 
    retailer or your dealer. Only genuine InFocus lamps are tested for use in this projector. Use of non 
    InFocus lamps may cause electrical shock and fire, and may void the projector warranty. InFocus is not 
    liable for the performance, safety or certification of any other lamps. 
     Warning: 
    • The projector uses a high-pressure mercury glass lamp. The lamp may fail prematurely, or it   
    may rupture with a popping sound if jolted, scratched, or handled while hot. The risk of lamp 
    failure or rupture also increases as the lamp age increases; please replace the lamp when you 
    see the “Replace Lamp.” 
    • Do not touch or block the projector lens with any objects as this can damage the projector 
    lens. Scratches, gouges and other lens damage are not covered by the product warranty. 
    • Unplug the power cord before replacing the lamp. 
    • Do not drop the lamp module. The glass may shatter and cause injury. 
    • Do not touch the glass surface of the lamp module. Fingerprints can obscure projection 
    sharpness and may cause the glass to shatter. 
    • Be extremely careful when removing the lamp housing. In the unlikely event that the lamp 
    ruptures, small glass fragments may be generated. The lamp module is designed to contain 
    most of these fragments, but use caution when removing it. 
    • Before replacing a ruptured lamp, clean the lamp compartment and dispose of cleaning 
    materials. Wash hands after lamp replacement. 
    • When replacing the lamp while the projector is ceiling-mounted, wear protective 
    eyewear to prevent eye injury. Hg – Lamp contains mercury. Manage in accordance 
    with local disposal laws. See www.lamprecycle.org. 
    • Be sure to turn off and unplug the projector at least 60 minutes before replacing the lamp. 
    Failure to do so could result in a severe burn. 
    1.  Switch off the power to the 
    projector by pressing the 
    POWER button twice. 
     
    2.  Allow the projector to cool 
    down at least 60 minutes. 
    3.  Disconnect the power 
    cord.    
    						
    							— 42 — 
    4.  Loosen the captive screw 
    on the lamp cover. 
     
    5.  Pull up and remove the 
    cover. 
    6.  Use a screwdriver to 
    loosen the two captive 
    screws from the lamp 
    module. 
     
    7.  Pull out the lamp module. 
         
    						
    							  – 43 – 
    8.  Reverse steps 1 to 7 to 
    install the new lamp 
    module.  
    While installing, align the 
    lamp module with the 
    connector and ensure it is 
    level to avoid damage. 
    Note:  
    The lamp module must sit 
    securely in place and the 
    lamp connector must be 
    connected properly before 
    tightening the screws. 
       
    						
    All InFocus manuals Comments (0)

    Related Manuals for InFocus Projector IN5316HDa User Manual