InFocus Projector In5312 User Manual

User’s Manual 
Advanced Features 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Installation II menu. Press 
▲▼  to move to the  Advanced menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced  menu. Press  ◄► to change setting values. 
 
ITEM DESCRIPTION 
OSD Menu Setting  Press Enter / ►
 to enter the OSD setting menu. See page  35 for more information on 
OSD Menu Setting . 
Peripheral Test  Press Enter/ 
► to enter the Peripheral Test menu. See page...

IN5312/IN5314 – User’s Manual 
OSD Menu Setting  
 
ITEM DESCRIPTION 
Menu Position Press ◄► button to move the OSD menu position. 
Translucent Menu Press ◄► button to select OSD background translucent level.  
Menu Display  Press ◄► button to select OSD timeout delay. 
 
Peripheral Test 
 
ITEM DESCRIPTION 
Remote Control 
Test  Press  (Enter) / ►
 to test the IR remote control for diagnostic testing.  
Color Test  Press  (Enter) / ► to select different colors on screen. 
USB Test  Press  (Enter) / ► to...

User’s Manual 
Lamp Hour Reset 
 
Please refer to Replacing the Projection Lamp  on page 42 to reset the lamp hour counter. 
 
3D 
 
Select the correct 3D setti ng for your 3D glasses: 
 - Select DLP-Link™ if your glasses are compliant  with Texas Instruments’ DLP 3D standard. This type 
of glasses do not require an external trigger,  they are triggered by the projected image. 
 - Select IR if your glasses are triggered by the vi deo source. This type of glasses are triggered by an 
external Infrared...

IN5312/IN5314 – User’s Manual 
Network State 
 
ITEM DESCRIPTION 
Network State Displays the network connection status. 
DHCP  Press 
◄► to turn DHCP On or Off.  
Note:  If you select DHCP Off, complete the IP  Address, Subnet Mask, Gateway, and 
DNS fields. 
IP Address   Enter a valid IP address if DHCP is turned off. 
Subnet Mask  Enter a valid Subnet Mask if DHCP is turned off. 
Gateway  Enter a valid Gateway address if DHCP is turned off. 
DNS Enter a valid DNS name if DHCP is turned off. 
Apply...

User’s Manual 
For simplicity and ease of operation, the projector provides diverse networking and remote management fea-
tures. 
The LAN/RJ45 feature allows the projector to be conn ected to a network and remotely managed. Available 
remote management controls includ e: Power On/Off, Video-Source, Bright ness and Contrast settings, Sound-
Mute, etc.
 
 
 
 
Enter the Projector IP address shown in the Installation II / Advanced / Network State menu. Note: 
DHCP must be on. The LAN/RJ45 Web Control window...

IN5312/IN5314 – User’s Manual 
Preparing Email Alerts  
1.  Make sure that user can access the hom epage of LAN RJ45 function by web browser (for ex-
ample, Microsoft Internet Explorer v6.01/v8.0).  
2.  From the Homepage of LAN/RJ45, click  Alert  Mail Settings.  
 
3.  By default, the input boxes in  Alert Mail Settings are blank.  
 
4.  To setup email alerts, input the following: 
` The  SMTP field is the mail server for sendi ng out email (SMTP protocol).  
This is a required field. 
`  The  To...

User’s Manual 
` The  From  field is the sender’s email address (for exam ple, the projector administrator). This 
is a required field.  
`  Select the alert conditions by  checking the desired boxes.  
 
Note: Fill in all fields as specified. Select the desired alert condition and click  Submit to con-
duct an  Email Alert Test. A successful test alerts the designated email accounts. To create 
an email alert, you must select alert co nditions and enter a correct email address.   
Group  and Name...

IN5312/IN5314 – User’s Manual 
Factory Reset 
Press the cursor ▲▼ button to move up and down in the  Installation II menu. Select the  Factory Re-
set  sub menu and press 
 (Enter) /  ► to reset all the menu items to  factory default values (except 
Language, Network Settings and Security Lock). 
 
 
Status 
Press the cursor ▲▼  button to move up and down in the  Installation II menu. Select the   
Installation II sub menu and press 
 (Enter) /  ► to enter the  Status sub menu.
 
 
ITEM DESCRIPTION...

User’s Manual 
– 42 – 
MAINTENANCE AND SECURITY 
Replacing the Projection Lamp 
The projection lamp should be replaced when it burns  out. Be sure to use the InFocus lamp module de-
signed for this projector. You can order new lamps  from www.infocusstore.com (in select areas), your 
retailer or your dealer. Only genuine InFocus lamps are  tested for use in this projector. Use of non InFo-
cus lamps may cause electrical shoc k and fire, and may void the projector warranty. InFocus is not liable 
for the...

IN5312/IN5314 – User’s Manual 
4.  Loosen the captive screw 
on the lamp cover. 
5.  Pull up and remove the 
cover. 
 
6.  Use a screwdriver to re-
move the two captive 
screws from the lamp 
module. 
 
7.  Pull out the lamp module. 
 
   – 43  –