InFocus Projector IN3138HD User Manual

							IN3138HD User’s Manual 
3. Right-click on Local Area Connection , and select Properties. 
 
4. In the  Properties  window, select the  General tab, and select  Internet Protocol (TCP/IP) . 
5. Click  Properties . 
 
6. Click  Use the following IP address  and fill in the IP address and Subnet mask, then click  OK. 
 
–34  –  
						

							IN3138HD User’s Manual 
7. Press the Menu button on the projector. 
8. Select  Settings2→ Advanced1  → Network 
9.  After getting into  Network, input the following: 
  DHCP: Off 
  IP Address: 10.10.10.10 
  Subnet Mask: 255.255.255.0 
  Gateway: 0.0.0.0 
  DNS Server: 0.0.0.0 
10. Press 
 (Enter) / ►  to confirm settings. 
Open a web browser  
(for example, Microsoft Internet Explorer  with Adobe Flash Player 9.0 or higher). 
 
11.  In the Address bar, input  the IP address: 10.10.10.10. 
12. Press 
 (Enter) / ► . 
The projector is setup for remote managemen t. The LAN/RJ45 function displays as follows. 
 
–  35  –  
						

							IN3138HD User’s Manual 
RS232 by Telnet Function 
Besides projector connected to RS232 interface with “Hyper-Ter minal” communication by dedicated 
RS232 command control, there is alternative RS232 command control way, so called “RS232 by 
TELNET” for LAN/RJ45 interface. 
Quick Start-Guide for “RS232 by TELNET” 
Check and get the IP-Address on OSD of the projector. 
Make sure that laptop/PC can acce ss the web-page of the projector. 
Make sure that “Windows Firewall” setting to be di sabled in case of “TELNET” function filtering 
out by laptop/PC. 
 
Start => All Programs => Accessories => Command Prompt 
 
– 36  –  
						

							IN3138HD User’s Manual 
Input the command format like the below: 
telnet  ttt.xxx.yyy.zzz  23 (“Enter” key pressed) 
( ttt.xxx.yyy.zzz : IP-Address of the projector) 
If Telnet-Connection ready, and us er can have RS232 command inpu t, then “Enter” key pressed, 
the RS232 command will be workable. 
 
How to have TELNET enabled in Windows VISTA / 7 
By default installation for Windows VISTA, “TELNE T” function is not included. But end-user can 
have it by way of “Turn Windows features On or Off” to be enabled. 
Open “Control Panel” in Windows VISTA 
 
Open “Programs”  
 
–  37  –  
						

							IN3138HD User’s Manual 
Select “Turn Windows features on or off” to open 
 
Have “Telnet Client” option che cked, then press “OK” button. 
 
Specsheet for “RS232 by TELNET” : 
1. Telnet: TCP 
2.  Telnet port: 23  
(for more detail, kindly please get contact with the service agent or team) 
3.  Telnet utility: Windows “T ELNET.exe” (console mode) 
4.  Disconnection for RS232-by-Telnet control normally: Close Wi ndows Telnet utility directly 
after TELNET connection ready 
5.  Limitation 1 for Telnet-Control: there is less  than 50 bytes for successive network payload for 
Telnet-Control application. 
Limitation 2 for Telnet-Control: there is le ss than 26 bytes for one complete RS232 command 
for Telnet-Control. 
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 
200 (ms). 
(*, In Windows XP built-in “TELNET.exe” utilit y, “Enter” key pressed will have “Carriage-
Return” and “New-Line” code.) 
 
 
 
– 38  –  
						

							IN3138HD User’s Manual 
Advanced 2 Features 
Press the Menu button to open the OSD menu. Press the  ◄► buttons to move to the  Settings 2 
menu. Press the  ▲▼ buttons to move to the  Advanced 2 menu and then press 
 (Enter) or ►. 
Press the ▲▼  buttons to move up and down in the  Advanced 2 menu. Press the  ◄► buttons to
 
enter and change setting values. 
 
ITEM DESCRIPTION 
Sleep Timer  Press the 
◄► buttons to enter and set the Sleep timer. The projector automatically 
turns off after the preset period of time. 
Source Filter  Press  (Enter) or 
► to enter the Source Filter menu. See page  40 for more 
information on Source Filter . 
–  39  –  
						

							IN3138HD User’s Manual 
Source Filter 
Press the ENTER button to enter the  Source Filter sub menu. This sub menu allows you to enable 
and disable source inputs. 
 
ITEM DESCRIPTION 
HDMI Press  the ◄►  buttons to enter and enable  or disable the HDMI source. 
DP Press the ◄►  buttons to enter and enable or disable the DisplayPort source. 
VGA 1  Press the ◄► buttons to enter and enable or disable the VGA1 source. 
VGA 2  Press the ◄► buttons to enter and enable or disable the VGA2 source. 
S-Video Press  the ◄►  buttons to enter and enable or disable the S-Video source. 
Composite Video  Press the ◄► buttons to enter and enable or disable the Composite Video source. 
 
–40  –  
						

							IN3138HD User’s Manual 
– 41  – 
MAINTENANCE AND SECURITY 
Replacing the Projection Lamp 
The projection lamp should be replaced when it burns out. It should only be r eplaced with a certified 
replacement part, which you can order from your local dealer.  
Important: 
a.  The projection lamp used in this product contains a small amount of mercury. 
b.  Do not dispose this product  with general household waste. 
c. Disposal of this product must be carried out in a ccordance with the regulations of your local  
authority. 
Warning: 
Be sure to turn off and unplug the projector at least 60 minutes before replacing the lamp. Failure to 
do so could result in a severe burn. 
 
Caution: 
In rare cases the lamp bulb may burn out during  normal operation and cause glass dust or shards 
to be discharged outward from the rear exhaust vent. 
Do not inhale or touch glass dust or shar ds. Doing so could result in injury.  
Always keep your face away from the exhaust ve nt so that you do not suffer from the gas and 
broken shards of the lamp. 
When removing the lamp from a ceiling-mounted projector, make sure that no one is under the 
projector. Glass fragments could fall if the lamp has burned out.  
！ IF A LAMP RUPTURES 
If a lamp ruptures, the gas and broken shards may scatter inside the  projector and may come out of 
the exhaust vent. The gas contains toxic mercury. 
Open windows and doors for ventilation. 
If you inhale the gas or the shards of the broken lamp enter your  eyes or mouth, consult a doctor 
immediately.  
1.  Loosen the single screw 
on the lamp compartment 
cover. 
  
						

							IN3138HD User’s Manual 
2.  Remove the lamp 
compartment cover. 
 
3.  Remove the three screws 
from the lamp module. 
4.  Lift the module handle up. 
5.  Pull firmly on the module 
handle to remove the lamp 
module. 
 
6.  Reverse steps 1 to 5 to 
install the new lamp 
module.  
While installing, align the 
lamp module with the 
connector and ensure it is 
level to avoid damage. 
Note:  
The lamp module must sit 
securely in place and the 
lamp connector must be 
connected properly before 
tightening the screws. 
 
– 42
  –  
						

							IN3138HD User’s Manual 
Resetting the Lamp Timer 
After replacing the lamp, you should reset the lamp hour timer to zero. Refer to the following: 
1.  Press the MENU button to open 
the OSD menu. 
2.  Press the  ◄► buttons to move to 
the Settings 2 menu. Press the  ▼ 
button to move down to 
Advanced 1 and press enter. 
3.  Press the  ▼▲ buttons to move 
down to Lamp Hour Reset. 
4.  Press the  (Enter) or ►  button. 
A message screen appears. 
5.  Press the  ▼▲◄► buttons in 
sequence to reset the lamp timer. 
6.  Press the  MENU button to return 
to Settings 2. 
 
–  43  –