InFocus Projector IN3138HD User Manual

IN3138HD User’s Manual 
3. Right-click on Local Area Connection , and select Properties. 
 
4. In the  Properties  window, select the  General tab, and select  Internet Protocol (TCP/IP) . 
5. Click  Properties . 
 
6. Click  Use the following IP address  and fill in the IP address and Subnet mask, then click  OK. 
 
–34  –  

IN3138HD User’s Manual 
7. Press the Menu button on the projector. 
8. Select  Settings2→ Advanced1  → Network 
9.  After getting into  Network, input the following: 
  DHCP: Off 
  IP Address: 10.10.10.10 
  Subnet Mask: 255.255.255.0 
  Gateway: 0.0.0.0 
  DNS Server: 0.0.0.0 
10. Press 
 (Enter) / ►  to confirm settings. 
Open a web browser  
(for example, Microsoft Internet Explorer  with Adobe Flash Player 9.0 or higher). 
 
11.  In the Address bar, input  the IP address: 10.10.10.10. 
12....

IN3138HD User’s Manual 
RS232 by Telnet Function 
Besides projector connected to RS232 interface with “Hyper-Ter minal” communication by dedicated 
RS232 command control, there is alternative RS232 command control way, so called “RS232 by 
TELNET” for LAN/RJ45 interface. 
Quick Start-Guide for “RS232 by TELNET” 
Check and get the IP-Address on OSD of the projector. 
Make sure that laptop/PC can acce ss the web-page of the projector. 
Make sure that “Windows Firewall” setting to be di sabled in case of...

IN3138HD User’s Manual 
Input the command format like the below: 
telnet  ttt.xxx.yyy.zzz  23 (“Enter” key pressed) 
( ttt.xxx.yyy.zzz : IP-Address of the projector) 
If Telnet-Connection ready, and us er can have RS232 command inpu t, then “Enter” key pressed, 
the RS232 command will be workable. 
 
How to have TELNET enabled in Windows VISTA / 7 
By default installation for Windows VISTA, “TELNE T” function is not included. But end-user can 
have it by way of “Turn Windows features On or Off” to be...

IN3138HD User’s Manual 
Select “Turn Windows features on or off” to open 
 
Have “Telnet Client” option che cked, then press “OK” button. 
 
Specsheet for “RS232 by TELNET” : 
1. Telnet: TCP 
2.  Telnet port: 23  
(for more detail, kindly please get contact with the service agent or team) 
3.  Telnet utility: Windows “T ELNET.exe” (console mode) 
4.  Disconnection for RS232-by-Telnet control normally: Close Wi ndows Telnet utility directly 
after TELNET connection ready 
5.  Limitation 1 for...

IN3138HD User’s Manual 
Advanced 2 Features 
Press the Menu button to open the OSD menu. Press the  ◄► buttons to move to the  Settings 2 
menu. Press the  ▲▼ buttons to move to the  Advanced 2 menu and then press 
 (Enter) or ►. 
Press the ▲▼  buttons to move up and down in the  Advanced 2 menu. Press the  ◄► buttons to
 
enter and change setting values. 
 
ITEM DESCRIPTION 
Sleep Timer  Press the 
◄► buttons to enter and set the Sleep timer. The projector automatically 
turns off after the preset...

IN3138HD User’s Manual 
Source Filter 
Press the ENTER button to enter the  Source Filter sub menu. This sub menu allows you to enable 
and disable source inputs. 
 
ITEM DESCRIPTION 
HDMI Press  the ◄►  buttons to enter and enable  or disable the HDMI source. 
DP Press the ◄►  buttons to enter and enable or disable the DisplayPort source. 
VGA 1  Press the ◄► buttons to enter and enable or disable the VGA1 source. 
VGA 2  Press the ◄► buttons to enter and enable or disable the VGA2 source. 
S-Video...

IN3138HD User’s Manual 
– 41  – 
MAINTENANCE AND SECURITY 
Replacing the Projection Lamp 
The projection lamp should be replaced when it burns out. It should only be r eplaced with a certified 
replacement part, which you can order from your local dealer.  
Important: 
a.  The projection lamp used in this product contains a small amount of mercury. 
b.  Do not dispose this product  with general household waste. 
c. Disposal of this product must be carried out in a ccordance with the regulations of your...

IN3138HD User’s Manual 
2.  Remove the lamp 
compartment cover. 
 
3.  Remove the three screws 
from the lamp module. 
4.  Lift the module handle up. 
5.  Pull firmly on the module 
handle to remove the lamp 
module. 
 
6.  Reverse steps 1 to 5 to 
install the new lamp 
module.  
While installing, align the 
lamp module with the 
connector and ensure it is 
level to avoid damage. 
Note:  
The lamp module must sit 
securely in place and the 
lamp connector must be 
connected properly before 
tightening...

IN3138HD User’s Manual 
Resetting the Lamp Timer 
After replacing the lamp, you should reset the lamp hour timer to zero. Refer to the following: 
1.  Press the MENU button to open 
the OSD menu. 
2.  Press the  ◄► buttons to move to 
the Settings 2 menu. Press the  ▼ 
button to move down to 
Advanced 1 and press enter. 
3.  Press the  ▼▲ buttons to move 
down to Lamp Hour Reset. 
4.  Press the  (Enter) or ►  button. 
A message screen appears. 
5.  Press the  ▼▲◄► buttons in 
sequence to reset the lamp...