InFocus Projector IN3136a User Manual

— 24 — 
Color Manager 
Press the Menu button to open the OSD menu. Press the ◄► buttons to move to the Image menu. 
Press the ▼▲ buttons to move to the Color Manager menu and then press  (Enter) or ►. Press 
the ▼▲ buttons to move up and down in the Color Manager menu.  
 
ITEM DESCRIPTION 
Red Select to enter the Red Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. 
Green Select to enter the Green Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and...

— 25 — 
Settings 1 Menu  
Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Settings 1 
menu. Press the ▲▼ buttons to move up and down in the Settings 1 menu. Press the ◄► buttons 
to enter and change setting values. 
 
ITEM DESCRIPTION 
Source Press the ◄► buttons to enter and select a source. 
Projection Press the ◄► buttons to enter and choose from four projection methodsK 
Aspect Ratio Press the ◄► buttons to enter and adjust the video aspect ratio. 
Keystone Press the...

— 26 — 
Audio 
Press the Menu button to open the OSD menu. Press the ◄► buttons to move to the Settings 1 
menu. Press the ▼▲ buttons to move to the Audio menu and then press  (Enter) or ►. Press the 
▼▲ buttons to move up and down in the Audio menu. 
 
ITEM DESCRIPTION 
Volume Press the ◄► buttons to enter and adjust the audio volume.  
Mute Press the ◄► buttons to enter and turn on or off the speaker. 
   

— 27 — 
Advanced 1 Features 
Press the Menu button to open the OSD menu. Press the ◄► buttons to move to the Settings 1 
menu. Press the ▲▼ buttons to move to the Advanced 1 menu and then press  (Enter) or ►. 
Press the ▲▼ buttons to move up and down in the Advanced 1 menu. Press the ◄► buttons to 
enter and change setting values. 
 
ITEM DESCRIPTION 
Language Press the ◄► buttons to enter and select a different localization MenuK 
Security Lock  Press the ◄► buttons to enter and enable or disable the...

— 28 — 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the ◄► buttons to enter and select different 3D modesK 
3D Sync Invert Press the ◄► buttons to enter and enable or disable 3D Sync InvertK 
3D Format Press the ◄► buttons to enter and enable or disable different 3D formatsK 
 
Note: 
1. By default, if no 3D source is detected, the 3D OSD menu items will not be available. 
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu items are available 
for selection. 
3. Use 3D glasses...

— 29 — 
Advanced 2 Features 
Press the Menu button to open the OSD menu. Press the ◄► buttons to move to the Settings 1 
menu. Press the ▲▼ buttons to move to the Advanced 2 menu and then press  (Enter) or ►. 
Press the ▲▼ buttons to move up and down in the Advanced 2 menu. Press the ◄► buttons to 
enter and change setting values. 
 
ITEM DESCRIPTION 
Test Pattern Press the ◄► buttons to enter and select internal test patternK 
H Image Shift Press the ◄► buttons to enter and select H Image ShiftK 
V...

— 30 — 
Settings 2 Menu  
Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Settings 2 
menu. Press the ▲▼ buttons to move up and down in the Settings 2 menu.  
 
ITEM DESCRIPTION 
Auto Source Press the ◄► buttons to enter and enable or disable automatic source detection.  
No Signal Power 
Off (min.) 
Press the ◄► buttons to enter and enable or disable automatic shutdown of lamp 
when no signal is detectedK 
Auto Power On Press the ◄► buttons to enter and enable or disable...

— 31 — 
Status 
Press the ▲▼ buttons to move up and down in the Settings 2 menu. Select the Status menu and 
press  (Enter) or ► to enter. 
 
ITEM DESCRIPTION 
Active Source Displays the current active source type. 
Video Information Displays resolution/video information for RGB sources and color standard for Video 
sources. 
Lamp Hours Lamp hour usage information is displayed. (Eco, Normal and Dynamic Eco) 
Serial Number Displays serial number of product. 
Software version Displays system software...

— 
32  —   Advanced 
1 Features  Press the 
Menu button to open the OSD menu. Press the  ◄► buttons to move to the  Settings 2 
menu. Press the  ▲▼
 buttons to move to the  Advanced 1 menu and then press   (Enter)  or ►. 
Press the  ▲▼ buttons to move up and down in the  Advanced 1 menu. Press the ◄► buttons  to 
enter and change setting values.  I TEM   D ESCRIPTION  
Menu Position   Press  the  ◄►   button s   to   enter and   select different OSD location.  
Translucent Menu   Press  the  ◄►   button...

— 
33  —   Lamp Hour Reset 
Please refer to 
Resetting the Lamp Timer  on page 45 to reset the lamp hour counter.  Network 
I TEM   D ESCRIPTION  
Network State   Displays the  n etwork connection status.  
DHCP   Press ◄► to turn DHCP On or Off.  
Note:   If  DHCP is turned Off , complete the IP Address, Subnet Mask, Gateway, and 
DNS fields.  
IP Address  Enter a valid IP address  when   DHCP is turned off.  
Subnet Mask   Enter a valid Subnet Mask  when   DHCP is turned off.  
Gateway   Enter a valid...