InFocus Projector IN136UST User Manual

							IN134UST/IN136UST User’s Manual 
Adjusting the Projector Level 
Take note of the following when setting up the projector: 
  The projector table or stand should be level and sturdy. 
   Position the projector so that it is perpendicular to the screen. 
   Ensure the cables are in a safe location. You could trip over them.  
 
To adjust the angle of the picture, turn the tilt-adjuster right or left until the desired angle 
has been achieved. 
—  14 —  
						

							IN134UST/IN136UST User’s Manual 
Adjusting the Focus and Keystone 
1.  Use the Image-focus  
control (on the projector 
only) to sharpen the 
projected image. 
 
2.  Use the KEYSTONE  
buttons the remote 
control to correct 
trapezoid image issues 
(wider top or bottom). 
 
3.  The keystone control  
appears on the display. 
Adjusting the Volume 
 
1.  Press the  Volume +/-  
buttons on the remote 
control.  
The volume control 
appears on the display. 
2.  Press the  MUTE button 
to turn off the volume. 
(This feature is available 
only on the remote).  
 
–  15  –
  
						

							IN134UST/IN136UST User’s Manual 
— 16 — 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you ma ke image adjustments and change various settings.  
Navigating the OSD 
2
1
1 2
3
4
1
1
2 4
5
6
5
6
3
 
You can use the remote control cursor button to navigate and make  changes to the OSD.  
1.  To enter the OSD, press the  MENU button.  
2.  There are five menus. Press  the ◄►  buttons to move 
through the menus.  
3. Press the  ▲▼ buttons to move 
up and down in a menu.  
4. Press  ◄► to change setting 
values. 
5. Press  MENU to close the OSD 
or leave a submenu. 
Note: 
Depending on the video source, not all items in  the OSD are available. For example, the 
Horizontal/Vertical Position  items in the Computer menu can only be modified when connected 
to a PC. Items that are not availabl e cannot be accessed and are grayed out.   
						

							IN134UST/IN136UST User’s Manual 
Setting the OSD Language 
Set the OSD language to your preference before continuing. 
1. Press the MENU button. Press the  ◄► buttons to navigate to Installation I. 
 
2. Press the ▲▼  buttons until Language is highlighted.  
 
3. Press the ◄►  buttons until the language you want is highlighted.  
4. Press the MENU  button twice to close the OSD.  
– 17  –  
						

							IN134UST/IN136UST User’s Manual 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
 
— 18 —  
						

							IN134UST/IN136UST User’s Manual 
OSD Sub-Menu Overview 
Installation II / Advanced / Peripheral Test
Remote Control Test
Installation II / Status
Video information
Active Source
Image / Advanced / Color  Manager
Red
Hue
Saturation
Gain
Lamp Hours(Normal, Bright)
Color Test
Color 
Temperature
Color Space
Color Manager
Native , Warm , 
Normal , Cold
Auto, RGB, YUV
Security Lock
OSD Menu Setting
Peripheral Test
Lamp Hour Reset
Image / Advanced
Installation I / 
Advanced
Installation II / Advanced
Installation II / Advanced /  OSD Menu Setting
Menu Position
Menu Display
Translucent Menu
Center, Down, Up, Left, Right
0%, 25%, 50%, 75%, 100%
Off , On
10 ~ 20
0 ~ 100
0 ~ 100
0 ~ 100
Green
Hue
Saturation
Gain
0 ~ 100
0 ~ 100
0 ~ 100
Blue
Hue
Saturation
Gain
0 ~ 100
0 ~ 100
0 ~ 100
Cyan
Hue
Saturation
Gain
0 ~ 100
0 ~ 100
0 ~ 100
Magenta
Hue
Saturation
Gain
0 ~ 100
0 ~ 100
0 ~ 100
Yellow
Hue
Saturation
Gain
0 ~ 100
0 ~ 100
0 ~ 100
White
Red
Green
Blue
0 ~ 100
0 ~ 100
0 ~ 100
Wall ColorOff, Light Yellow, Pink, Light 
Green, Blue, Blackboard
Low Power ModeOn, Off
Network
Installation II / 
Advanced / Network
Network State
IP Address
DHCP
Connect, Disconnect
Off , On
0~255, 0~255, 0~255, 0~255
Subnet Mask0~255, 0~255, 0~255, 0~255
Gateway0~255, 0~255, 0~255, 0~255
DNS0~255, 0~255, 0~255, 0~255
Apply
3D
Installation II / 
Advanced / 3D
3D
3D Sync Invert
Off, DLP-Link, IR
On, Off
Presentation 
Timer
Digital Zoom-10~10
Installation I / Advanced / 
Presentation Timer
Timer
Timer Reset
Timer Period
Off , On
1~60
USB Test
Video / Audio
3D FormatFrame Sequential, Top/Bottom, 
Side-By-Side, Frame Packing(3D FramePacking HDMI source only)
Volume
MuteOff , On
0~8
Audio InputMini, HDMI
Software version
Keypad LockOff , On
Logo
Logo Capture
 
–  19  –  
						

							IN134UST/IN136UST User’s Manual 
Image Menu  
Press the MENU button to open the  OSD menu. Press the  ◄► buttons to move to the  Image Menu. 
Press the ▲▼  buttons to move up and down in the  Image menu. Press  ◄► to change setting 
values. 
 
ITEM DESCRIPTION 
Display Mode 
Press the ◄►  buttons to set the Display Mode.  
Note: Display Mode must be set to Detail  in order to access the other Image 
menu items.
 
Brilliant Color  Press the ◄► buttons to adjust the Brilliant Color value. 
Brightness Press the  ◄► buttons to adjust the display brightness. 
Contrast Press  the ◄►  buttons to adjust the display contrast. 
Sharpness Press the  ◄► buttons to adjust the display sharpness level. 
Gamma Press  the ◄►  buttons to adjust the gamma correction of the display.  
Advanced  Press  (Enter) / 
► to enter the Advanced menu. See  Advanced Feature on page 
21 . 
Reset Press  (Enter) / ►  to reset all settings to default values. 
 
— 20 —  
						

							IN134UST/IN136UST User’s Manual 
Advanced Features 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Image menu. Press  ▼▲ 
to move to the  Advanced menu and then press  Enter or ►. Press  ▼▲ to move up and down in the 
Advanced  menu. 
 
ITEM DESCRIPTION 
Color Space   Press the ◄►
 buttons to adjust the color space.  
(Range: Auto – RGB – YUV )  
Color Temperature   Press the ◄►
 buttons to adjust the color temperature.  
(Range: Native – Warm – Normal – Cold ) 
Color Manager   Press 
 (Enter) / 
► to enter the color manager menu.  
(Range: Red – Green – Blue – Cyan-Magenta – Yellow – White).  
See page 22  for more information on  Color Manager.  
 
– 21  –  
						

							IN134UST/IN136UST User’s Manual 
Color Manager 
Press  (Enter) / ► to enter the  Color Manager  sub menu.  
 
ITEM DESCRIPTION 
Red  Select to enter the Red Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Green  Select to enter the Green Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue  Select to enter the Blue Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan  Select to enter the Cyan Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Magenta  Select to enter the Magenta Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Yellow  Select to enter the Yellow Color Manager.  
Press the
◄► buttons to adjust the Hue, Saturation, and Gain. 
White  Select to enter the White Color Manager.  
Press the 
◄► buttons to adjust the Red, Green, and Blue. 
 
 
— 22 —  
						

							IN134UST/IN136UST User’s Manual 
Computer Menu  
Press the MENU button to open the  OSD menu. Press the  ◄► buttons to move to the  Computer 
menu. Press the  ▲▼ buttons to move up and down in the computer menu. Press  ◄► to change 
setting values. 
 
ITEM DESCRIPTION 
Horizontal Position  Press the ◄► buttons to adjust the display position to left or right.  
Vertical Position  Press the ◄► buttons to adjust the display position to up or down.  
Frequency Press the  ◄► buttons to adjust the A/D sampling clock. 
Tracking Press  the ◄►  buttons to adjust the A/D sampling dot. 
Auto Image  Press  (Enter) / 
► to automatically adjustment for phase, tracking, size and 
position. 
 
–  23  –