InFocus Projector IN1142 User Manual
Here you can view all the pages of manual InFocus Projector IN1142 User Manual. The InFocus manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
Page 2
![Page 2
2
1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from overhea\
ting, it is recommended that you install the projector in a location that does not block ventilation. For example, do\
not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or cabinet that restricts air flow .
2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do...](http://img.usermanuals.tech/thumb/2503/99687/w300_projector_manual_8279_d-1.png "Page 2
2
1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from overhea\
ting, it is recommended that you install the projector in a location that does not block ventilation. For example, do\
not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or cabinet that restricts air flow .
2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do...")
2 1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from overhea\ ting, it is recommended that you install the projector in a location that does not block ventilation. For example, do\ not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or cabinet that restricts air flow . 2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do...
Page 3
3
decLaratIon of conformIty
Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Portland, Oregon 97223-8368 USA
We declare under our sole responsibility that this projector conforms to the following directives and norms:
EMC Directive 2004/108/EC
ErP Directive 2009/125/EC
EMC: EN 55022: 2010
EN 55024: 2010
EN 61000-3-2: 2006+A2:2009
EN 61000-3-3:2008
Low Voltage Directive 2006/95/EC
Safety: IEC 60950-1:2005; EN 60950-1:2006+A12:2011
trademarkS
Apple, Macintosh, iPod, iPod nano,...
Page 4
![Page 4
4
product oVerVIeW
5V/1A
89
10111213
15
45
7
3
1
6
2
141617
product oVerVIeW
1. Focus Dial2. Kensington Lock3. Power Button () 4. Up Button ()5. Menu Button (MENU)6. Left Button ()7. Down Button ()8. Auto Source Button ()9. Right Button ()
NoteItems 4~10 are also function buttons. Functions vary depending on the cu\
rrent mode.
10. USB Connector (Service Only)11. HDMI Connector12. Audio Output Connector13. IR Receiver14. Lens15. DC Input16. Screw Hole for Tripod17. Elevator Foot
124
6
8
10...](http://img.usermanuals.tech/thumb/2503/99687/w300_projector_manual_8279_d-3.png "Page 4
4
product oVerVIeW
5V/1A
89
10111213
15
45
7
3
1
6
2
141617
product oVerVIeW
1. Focus Dial2. Kensington Lock3. Power Button () 4. Up Button ()5. Menu Button (MENU)6. Left Button ()7. Down Button ()8. Auto Source Button ()9. Right Button ()
NoteItems 4~10 are also function buttons. Functions vary depending on the cu\
rrent mode.
10. USB Connector (Service Only)11. HDMI Connector12. Audio Output Connector13. IR Receiver14. Lens15. DC Input16. Screw Hole for Tripod17. Elevator Foot
124
6
8
10...")
4 product oVerVIeW 5V/1A 89 10111213 15 45 7 3 1 6 2 141617 product oVerVIeW 1. Focus Dial2. Kensington Lock3. Power Button () 4. Up Button ()5. Menu Button (MENU)6. Left Button ()7. Down Button ()8. Auto Source Button ()9. Right Button () NoteItems 4~10 are also function buttons. Functions vary depending on the cu\ rrent mode. 10. USB Connector (Service Only)11. HDMI Connector12. Audio Output Connector13. IR Receiver14. Lens15. DC Input16. Screw Hole for Tripod17. Elevator Foot 124 6 8 10...
Page 5
![Page 5
5
1. Connect the HDMI device using an appropriate cable.
2. After powering on, the projector will automatically detect the HDMI inpu\
t.
5V/1A
adjuSt projected Image heIghtadjuSt the projected Image
The projector is equipped with an elevator foot for adjusting the projec\
ted image height.
To adjust the height:Turn the elevator foot to adjust the projected image position to the desi\
red height.
5V/1A
Adjust the focus until the image is clear.
connect Input Source - hdmI
Note1. All other brand and...](http://img.usermanuals.tech/thumb/2503/99687/w300_projector_manual_8279_d-4.png "Page 5
5
1. Connect the HDMI device using an appropriate cable.
2. After powering on, the projector will automatically detect the HDMI inpu\
t.
5V/1A
adjuSt projected Image heIghtadjuSt the projected Image
The projector is equipped with an elevator foot for adjusting the projec\
ted image height.
To adjust the height:Turn the elevator foot to adjust the projected image position to the desi\
red height.
5V/1A
Adjust the focus until the image is clear.
connect Input Source - hdmI
Note1. All other brand and...")
5 1. Connect the HDMI device using an appropriate cable. 2. After powering on, the projector will automatically detect the HDMI inpu\ t. 5V/1A adjuSt projected Image heIghtadjuSt the projected Image The projector is equipped with an elevator foot for adjusting the projec\ ted image height. To adjust the height:Turn the elevator foot to adjust the projected image position to the desi\ red height. 5V/1A Adjust the focus until the image is clear. connect Input Source - hdmI Note1. All other brand and...
Page 6
6 hoW to uSe the menu Menu Items PICTURE menu Menu Operation pSelect main menu uEnter current submenu qHide OSD menu Submenu Operation pMove uptAdjust settingqMove downu Entering Menu Mode Press on the remote control or on the control panel to enter the menu mode. SCREEN menu SETTING menuOPTIONS menu
Page 7
7 MenuMenu itemDescription PICTURE Display ModeSet the brightness of the display. BrightnessAdjust the brightness of the image. ContrastAdjust the contrast of the image. SharpnessAdjust the sharpness or softness of the image. Advanced Set advanced settings for projected image. GammaAdjust the color gamma differences between the dark and bright portions of the input signal. BrilliantColorIncrease the brightness by changing the colors. Color TemperatureSelect the color temperature in the display. Color...
Page 8
![Page 8
www.infocus.com/supportRegulatory Model: IN1142Part Number: 4J.10801.001
If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local retailer o\
r service center.
Image Problems
P No image appears on-screen
• Ensure the power cord is correctly and securely connected.
• Ensure the pins of connectors are not crooked or broken.
• Make sure the projector is switched on.
P Image is out of focus
•
Adjust the Focus Dial....](http://img.usermanuals.tech/thumb/2503/99687/w300_projector_manual_8279_d-7.png "Page 8
www.infocus.com/supportRegulatory Model: IN1142Part Number: 4J.10801.001
If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local retailer o\
r service center.
Image Problems
P No image appears on-screen
• Ensure the power cord is correctly and securely connected.
• Ensure the pins of connectors are not crooked or broken.
• Make sure the projector is switched on.
P Image is out of focus
•
Adjust the Focus Dial....")
www.infocus.com/supportRegulatory Model: IN1142Part Number: 4J.10801.001 If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local retailer o\ r service center. Image Problems P No image appears on-screen • Ensure the power cord is correctly and securely connected. • Ensure the pins of connectors are not crooked or broken. • Make sure the projector is switched on. P Image is out of focus • Adjust the Focus Dial....