InFocus Projector IN112x User Manual

20
Using the remote control
The remote uses two (2) AAA batteries (not provided). They are easily installed by 
removing the cover from the remote’s ba ck, aligning the + and - ends of the 
batteries, sliding them into plac e, and then replacing the cover.
Caution : 
• When replacing the remote batteries, be  aware that using batteries other than 
AAA batteries may 
 risk severe damage to the remote . When disposing of the 
batteries, be sure to do so in  an enviromentally proper manner.
• If the remote...

21
Using the audio
Using the projector’s speakers
Connect the audio source to the Audio 1/Audio 2 connectors to hear audio through 
the projector speakers.  
Amplified speakers may also be connected to the projector 
 using the Audio Out 
connector.
To adjust the volume, press the  Vo
 l u m e buttons on the remote.
Troubleshooting Audio
If you aren’t hearing the audio, check the following:
• Make sure the audio cable is connected to the  Audio
  1/Audio 2 connector on 
the projector, and that the other...

22
Using the keypad buttons
Most buttons are described in detail in other sections, but here is an overview of 
their functions:
Power –turns the 
 projector on and off ( page 9).
Right arrow  
 - When the menu is displayed,  the right arrow button navigates 
through the menu.
Up arrow/Keystone  
 - When the menu is displayed,  the up arrow button navigates 
through the menu. When the menu is not di splayed, this button adjusts the square-
ness of the image ( page 10 ).
Down arrow/Keystone  
 - When the...

23
Optimizing computer images
After the projector is running and the image is on the screen, you can optimize the 
image using the onscreen menus. For gene ral information on using the menus, see 
page  25.
• Select default image setti ngs u
 sing a preset appropriate to your environment.
• Adjust the Keystone, Cont rast, or 
 Brightness (page 26).
• Change the Aspect  Ratio. Choose the 
 option that best fits your input source 
(page  26).
• Adjust the Color Temperature ( page 27).
• Adjust the Phase,...

24
Optimizing video images
After your video device is connected properly and the image is on the screen, you 
can optimize the image using  the onscreen menus. For general information on using 
the menus, see  page 25.
• Adjust the Keystone, Contrast, B
 rightness, Color, or Tint (page 26).
• Change the Aspect  Ratio
 . Choose the option that best fits your input source 
(page  26).
• Select a Sharpne ss
  setting (page 26). 
• Adjust the Color Temperature. Select a listed warmth value ( page 27).
• Turn...

25
Using the menus
1To open the menus, press the Menu button on the keypad or remote. (The 
menus automatically close  after 60 seconds if no buttons are pressed.) Use the 
arrow buttons to move up and down to review the menu options.
2To enter a submenu, highlight the desi red submenu and press > on the keypad or 
Select  on remote.
3To adjust a menu setting, highlight the  desired menu option and press < or > to 
scroll through the available adjustments. 
4Press the  Menu button to exit the menu...

26
Basic Menu
To adjust the following settings, highlight the setting, use the right and left arrows 
to adjust the values.
Aspect Ratio : 
 Aspect ratio is the ratio of th e image width to image height. TV 
screens are usually 4:3.  HDTV and most DVDs are 16:9.
Select Auto to have the projector choos e 
 the ratio. Choose Native to see the 
unmodified input with no resizing by the proj ector. Select 16:9 to watch enhanced 
widescreen DVDs.
Auto Image :
  resets the projector to the source.
Brightness :...

27
Advanced Menu
Image: 
3D Control:3D: allows you
  to enjoy 3D (stereoscopic) content.  Your projector supports 
Auto, Top-Bottom, Frame Sequential, Frame Packing, Side-by-Side for con -
trolling LCD shutter glasses. In addition to  the 
 projector, you will need a pair 
of 3D shutter glasses, 3D  content, and 3D compatible  source (and emitter).  
Ensure the glasses you choose are cons istent with the synchronization mode 
you will be using.
3D Sync Invert:  If the imag
 e appears to flutter, look odd...

28
Setup:
Audio Setup...
Internal Speaker : tu
 rns the internal speaker on or off.
Computer 1 : selects 
 the audio input for Computer 1 signal.
Computer 2 : selects the audio input  for Co
 mputer 2 signal. NOTE: Not avail -
able on the IN118HDxc or IN119HDxc.
Video : 
selects the audio input for video source.  NOTE: Not available on the 
IN118HDxc or IN119HDxc.
HDMI : select 
 the audio input for HDMI signal.
Closed Captioning... Closed Captions
: controls closed captioning.  If the source is NTSC and...

29
Lamp...Programmed Dimming :
  When enabled, Programmed Dimming enhances 
contrast ratios in dark  scenes and disables Lamp Low Power. Programmed 
Dimming will impact lamp life and sy stem noise performance. Programmed 
Dimming works in conjunction with the la mp. If Lamp Low Power is enabled, 
Programmed Dimming is unavailable.
Lamp Low Power : toggles between on and of
 f. Turn it on to lower the light 
output of the lamp. This also lowers  the fan speed, making the projector qui -
eter.
OSD Setup......