InFocus Projector IN112x User Manual

10
Adjusting the image
If necessary, adjust the height of the projector by rotating the elevator foot to extend 
the foot.
If necessary, rotate the leveling foot located at the rear of the projector.
Avoid placing your hands near  
 the hot exhaust vent at the front of the projector.
Position the projector the desired distance 
 from the screen at a 90 degree angle to 
the screen.
See  page  6 for a table listing scre e
n sizes and distances.
Adjust the zoom or focus.
If the image is not square, first...

11
Connecting a video device
You can connect video devices such as VCRs, DVD players, camcorders, digital 
cameras, video game  consoles, HDTV receivers, and TV  tuners to the projector. 
You can connect the audio directly to th e projector to get sound from the built-in 
speaker, or you can bypass the projecto r’s audio system and connect the audio 
directly from your source to a st ereo or home theater system.
You can connect the projector to most video 
 devices that can output video. You 
cannot...

12
Shutting down the projector
Auto Off Time
The projector also has an Auto Off Time feature that automatically turns the 
projector off after no active sources are de tected and no user interaction with the 
projector is performed for 30 minutes. By  default, this feature is off. You can 
change the length of time, see  page 30.
Turning off the projector
To turn the projector off, press the  Power button on the remote or keypad. The lamp 
turns off and the Power LED blinks amber fo r 30 seconds while...

13
Problem SolutionResult
No start up screen Plug power cord into the projector
press the Power buttonCorrect image
Only start up screen appears Press the SOURCE button
activate laptop’s external portComputer image projected
Startup
Screen
A
Startup
Screen
Restart laptop
A
A 

14
ProblemSolution Result
No computer image, just the words “Signal out of 
ran
 ge”  Press the Auto Image button on remote
Adjust computer refresh rate (Windows 7: Control 
Pane
l > Display > Screen Resolution > Advanced 
Settings > Adapter tab). Varies per operating system.
You may also need to set a different resolution on 
your comput
 er, as shown in the following problem, 
“image fuzzy or cropped” Computer image projected
Only my laptop’s background appears, not the 
Desktop icons Change the...

15
Image fuzzy or cropped Change the computer's "Res
olution" setting to  match 
the projector's resolution  (W
 indows 7: Control Panel 
> Display > Screen Resolution). Varies per operating 
system.  Image clear and not cropped
Image not centered on screen Move projector, adjust height
Correct image
Problem
Solution Result
AAA
Adjust horizontal or 
vertical position in 
Advanced Menu > 
Image > PC... menu 

16
Image not squareAdjust Keystone on keypad Square image
Image not sharp Adjust Sharpness in the Basic Menu
Correct image
Image does not fit 4:3 or 16:9 screen Change aspect ratio to 4:3 or 16:9 in Basic Menu > 
Aspect Ratio menu Correct image
Problem
Solution Result 

17
Image upside downTurn off Ceiling Mount in Basic menu
Correct image
Image reversed left to right Turn off Rear Project in
 
 Advanced Menu > Setup > 
Image Setup... menu Correct image 
Projected colors don’t match source Adjust the items in the Advanced Menu > Image > 
Color... menu Correct image
Problem
Solution Result
A
A
COLORCOLOR 

18
The video embedded in my PowerPoint 
presentation does not play on the screenTurn off the internal LCD display on your laptop
Embedded video plays correctly
Lamp won’t turn on, the  pr
 ojector is overheatingMake sure vents aren’t blocke
d,  turn off the projector 
and allow it to cool for one minute  Lamp turns on
Problem
Solution Result
AB
ABAB
Overheating 
indicator
Startup
Screen 

19
Still need assistance?
If you need assistance, visit 
 our website at www.infocus.com/support  or call us. 
See the Quick Start Guide fo r support contact information.
This product is backed by a limited warr anty
 . An extended warranty plan may be 
purchased from your dealer. When sending the projector in for repair, we 
recommend shipping the unit in its or iginal packing material, or having a 
professional packaging company pack the unit.  Please insure your shipment for its 
full value. “Replace...