InFocus Projector CP-S245 CP-X255 User Manual
Here you can view all the pages of manual InFocus Projector CP-S245 CP-X255 User Manual. The InFocus manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
51 Troubleshooting Regarding the indicator lamps (continued) POWER indicatorLAMP indicatorTEMP indicatorDescription Blinking In Red or Lighting In Red Turned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the projector to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation that no foreign matter has become caught in the fan, etc., and then turn the power on again. If the same indication is displayed...
Page 52
52 Troubleshooting Phenomena that may be easy to be mistaken for machine defects WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer or service company. 1. Before...
Page 53
53 Phenomena that may be easy to be mistaken for machine defects (continued) PhenomenonCases not involving a machine defectReference page Sound does not come out. The signal cables are not correctly connected.Correctly connect the audio cables.12,13 The MUTE function is working.Restore the sound pressing the MUTE or VOLUME button on the remote control.18 The volume is adjusted to an extremely low level.Adjust the volume to a higher level using the menu function or the remote control.18 The AUDIO...
Page 54
54 Phenomena that may be easy to be mistaken for machine defects (continued) PhenomenonCases not involving a machine defectReference page Pictures appear dark. The brightness and/or contrast are adjusted to an extremely low level.Adjust BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function. 25 The WHISPER function is working.Select NORMAL for the WHISPER item in the SETUP menu.25 The lamp is approaching the end of its product lifetime.Replace the lamp.43, 44 Pictures appear...
Page 55
55 Warranty And After-Ser vice Warranty and after-service If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied. Specifications Specifications NOTE • These specifications are subject to change without notice. Item Specification Product nameLiquid crystal projector Liquid Crystal panel Panel size1.5 cm (0.6...
Page 56
56 Specifications Specifications (continued) Y R L AUDIO IN2AUDIO OUTCONTROL RGB IN1 RGB IN2 USB RGB OUTAUDIO IN1LANLINKACTVIDEOS-VIDEO CB/PBCR/PRK 306 mm 249 mm 100 mm86 mm