InFocus LP120 Projector User Manual

LP
®120
PERSONAL PROJECTION. PERFECTED.
USER’S GUIDE
6163IFS_LP120 UG.qxd  4/28/03  3:59 PM  Page 1  

This entire user’s guide is available on the enclosed CD as an Adobe Acrobat pdf file in the following languages: English, French, German, Italian, Norwe-
gian, Portuguese, Spanish, Russian, Japanese, Korean, Traditional Chinese, Simplified Chinese. Before using this projector, pl ease read these instructions. 
Le mode demploi complet est disponible sur le CD joint sous forme de fichier pdf dAdobe Acrobat dans les langues suivantes :  anglais, français, 
allemand, italien, norvégien, portugais, espagnol,...

2
Declaration of ConformityManufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 
97070 USA
European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands
We declare under our sole responsibility that the projector conforms to the following 
directives and norms:
EMC Directive 89/336/EEC, Amended by 93/68/EEC
EMC: EN 55022
           EN 55024
 EN 61000-3-2
 EN 61000-3-3
Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC
Safety: EN 60950: 2000 
July, 2002TrademarksApple,...

3 Table of Contents
Introduction 5
Connecting a computer  6
Required computer connections  6
Displaying a computer image  7
First-time projector use with Windows 98  8
Adjusting the image  10
Connecting a video device  11
Displaying a video image  12
Shutting down the projector  14
Troubleshooting your setup  14
Using the keypad buttons  22
Using the remote control  23
Using the audio  24
Optimizing computer images  25
Presentation features  25
Optimizing video images  26
Customizing the projector  26...

4 

5
IntroductionYour new digital projector packs great performance into a shape and size 
customized for the mobile professional. It fits comfortably in your laptop 
bag then transitions easily into your presentation environment. It is easy to 
connect, easy to use, and easy to maintain. The InFocus Interactive Display 
on the top of the projector gives you constant feedback on the status of the 
projector.
 
Projector components and features
 documentation remote
computer
cableprojector
power
cableaudio...

6
Connecting a computerRequired computer connectionsConnect the black end of the computer cable to the Computer in connector 
on the projector. Connect the blue end to the video (VGA) port on your com-
puter. If you are using a desktop computer with a single VGA port, you first 
need to disconnect the monitor from that computer ’s video port. 
Connect the black power cable to the connector on the side of the projector 
and to your electrical outlet.
The Power LED on the projector ’s keypad turns solid...

7
Displaying a computer image Remove the lens cap.
Press the Pow e r button on the top of the projector.
The LED flashes green and the Interactive Display illuminates and counts 
down the time to image display. When the lamp comes on, the startup 
screen is displayed and the LED is steady green. It can take a minute for the 
image to achieve full brightness. 
? No startup screen? Get help on page 15. 
Turn on your computer.
The computer ’s image should appear on the projection screen. If it doesn’t,...

8
First-time projector use with Windows 98The first time you connect a computer running Windows 98 to the projector, 
the computer recognizes the projector as “new hardware” and the Add 
New Hardware Wizard appears. Follow these instructions to use the Wiz-
ard to load the correct driver (which was installed with your Windows 
operating system).
If you are running Windows 2000, Windows ME, or Windows XP, skip these 
steps and go to “Adjusting the image” on page 10.aClick Next to begin searching for the...