InFocus LP 260 Projector User Manual
Have a look at the manual InFocus LP 260 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
43 APPENDIX Specifications The projector must be operated and stored within the tempera- ture and humidity ranges specified. Te m p e r a t u r e Operating 41 to 95 ° F (5 to 35° C) Non-operating 14 to 140 ° F (-10 to 60° C) Humidity Operating and non-oper. 80% relative humidity, non-condensing Dimensions 7.4 x 2.9 x 11.4 inches (18.9 x 7.5 x 29.0 cm) We i g h t 5.5 lbs. (2.5 kg) unpacked Altitude Operating 0 to 7,500 feet (2,286 meters) Optics Focus Range 4.6 - 26 feet (1.4-8 m) Lamp Type 120-watt or 132-watt UHP lamp Input Power Requirements 100-120VAC 2.2A;50/60Hz 200-240VAC 1.1A; 50/60Hz
44 Appendix Accessories NOTE: Use only InFocus- approved accessories. Other products have not been tested with the projector.Standard Accessories (ship with the projector) Part Number Quick Start Card 009-0550-xx User’s Guide 010-0262-xx Soft Case 110-0362-00 Shipping Box 110-0365-xx Power Cord (North American) 210-0195-xx Power Cord (European) 210-0196-xx VGA computer cable 210-0200-xx Composite Video Cable 210-0197-xx Computer Audio Cable 210-0194-xx AV Audio Cable 210-0198-xx S-video Cable 210-0199-xx Control Cable for PS/2 Port 210-0202-xx Control Cable for ADB Port 210-0201-xx Control Cable for Serial Port 210-0203-xx Macintosh Adapter 515-0052-xx Remote Control 590-0381-xx Batteries for Remote Control 521-0021-xx Projection Lamp Module SP-LAMP-LP260 Lens Cap 340-0836-xx
45 NOTE: You can purchase these items by contacting your dealer or InFocus Catalog Sales at 1-800-660-0024. Optional AccessoriesDeluxe Carry Case CA-C161 Executive Leather Case CA-C133 Shipping Case (ATA approved) CA-ATA-260 Deluxe Travel Case CA-C160 Hard Travel Porter Case CA-C142 15’ Mac Extension Cable SP-MAC15 15’ VGA Extension Cable SP-VGA15 Audio/Video Cable SP-AV30 GyroMouse Pro RF Remote Control HW-RF-GPRO RemotePoint RF Remote Control w Laser Pointer HW-RF-REMLSR GyroMouse Presenter RF Remote Control HW-RF-GPRES Executive Remote IR Receiver HW-EXRCVR PC Guardian Projector Cable Lock SP-LOCK 40” Portable Projection Screen HW-PORTSCR40 50” Portable Projection Screen HW-PORTSCR50 60” Deluxe Insta-Theatre Screen HW-DLXSCRN 84” Pull Down Screen HW-WALLSCR84 Deluxe Wheeled Projector and Computer Cart HW-CART Portable Projector Stand SP-STND eBeam (Web Enabled Electronic Meeting Assistant)HW-EBEAM 3 rd Year Advantage Service Plan (1 year extension)EW-LP26x-12
46 Appendix Portable and Laptop Activation Chart NOTE: Visit our website at www.infocus.com for the most current activation chart. It is located in the Technical Library in the Service and Support section. Many laptop computers do not automatically turn on their exter- nal video port when a projector is connected. Activation com- mands for some laptop computers are listed in the following table. (If your computer is not listed or the given command does not work, refer to the computer ’s documentation for the appro- priate command.) On many laptops, the activation function key is labeled with an icon, for example or the text CRT/LCD. NOTE: Usually, pressing the key commands once activates the external video port, pressing it again activates both the external and internal ports, and pressing it a third time activates the internal port. Refer to your computer’s documentation for details on your specific model. ComputerKey command to activate portKey command to de-activate port Acer Ctrl-Alt-Esc (for setup) Ctrl-Alt-Esc (for setup) AST* ** FN-D or Ctrl-D FN-D or Ctrl-D Ctrl-FN-D Ctrl-FN-D FN-F5 FN-F5 type from A:/IVGA/CRT type from A:/IVGA/CRT FN-F12 FN-F12 AMS FN-F2 FN-F2 AMT setup screen setup screen AT & T F N - F 3 FN-F6FN-F3 FN-F6 Advanced Logic ResearchCtrl-Alt-V Ctrl-Alt-V Altima Shift-Ctrl-Alt-C Shift-Ctrl-Alt-L setup VGA/ Conf.Simulscansetup VGA/ Conf.Simulscan Ambra** FN-F12 FN-F12 FN-F5 FN-F5 F2/Choose Option/F5 F2/Choose Option/F5 Amrel* ** setup menu setup menu Shift-Ctrl-D Shift-Ctrl-D Apple see Mac Portable and Mac PowerBook Aspen automatic automatic Award FN-F6 FN-F6 BCC* automatic reboot computer
47 Bondwell LCD or CRT options after bootupreboot for LCD or CRT options to appear Chaplet** setup screen setup screen FN-F6 FN-F6 FN-F4 FN-F4 Chembook FN-F6 FN-F6 Commax Ctrl-Alt-#6 Ctrl-Alt-#5 Compaq* ** Ctrl-Alt-< Ctrl-Alt-> FN-F4 FN-F4 automatic automatic mode/? (for setup option) mode/? (for setup option) Compuadd* ** automatic automatic Alt-F for screen setup optionAlt-F for screen setup option Data General Ctrl-Alt-Command Ctrl-Alt-Command Data General Wa l k a b o u t2 CRT/X at DOS prompt reboot Datavue Ctrl-Shift-M Ctrl-Shift-M DEC** FN-F5 FN-F5 FN-F4 FN-F4 Dell** Ctrl-Alt-< Ctrl-Alt-> Ctrl-Alt-F10 Ctrl-Alt-F10 FN-F8 (CRT/LCD) FN-F8 FN-D FN-D FN-F12 FN-F12 Digital* automatic reboot FN-F2 FN-F2 Dolch dip switch to CRT dip switch to LCD Epson dip switch to CRT dip switch to LCD Everex* setup screen option setup screen option For-A Ctrl-Alt-Shift-C Ctrl-Shift-Alt-L Fujitsu FN-F10 Gateway FN-F3 FN-F1/FN-F1 again simul- taneousFN-F3 FN-F1 ComputerKey command to activate portKey command to de-activate port
48 Appendix Grid* ** FN-F2, choose auto or simultaneousFN-F2 Ctrl-Alt-Tab Ctrl-Alt-Tab Hitachi FN-F7 FN-F7 Honeywell FN-F10 FN-F10 Hyundai setup screen option setup screen option IBM 970* automatic warm reboot IBM ThinkPad** reboot, enter setup menu FN-F2 FN-F7, select choice from setup menu FN-F1, select choice FN-F5, select choice PS/2 SC select choice (CRT, LCD, etc.) Infotel FN-F12 FN-F12 Kaypro boot up, monitor plugged inunplug monitor Kris Tech FN-F8 FN-F8 Leading Edge FN-T FN-T Mac Portable 100no video port: not compatible Mac PowerBook 140, 145, 150, 170no video port: requires a 3rd-party interface 160, 165, 180, 520, 540, 5300Control Panel folder, Pow- erBook Display folder; Activate Video Mirroringwarm reboot 210, 230, 250, 270, 280, 2300requires Apple Docking Station or Mini Dock Magitronic FN-F4 FN-F4 Mastersport FN-F2 FN-F1 Micro Express* automatic warm reboot Micron FN-F2 FN-F2 Microslate* automatic warm reboot ComputerKey command to activate portKey command to de-activate port
49 Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On NCR setup screen option setup screen option NEC* ** setup screen option setup screen option CRT at the DOS prompt LCD at the DOS prompt FN-F3 FN-F3 Olivetti* automatic automatic FN-O/* FN-O/* Packard Bell* ** FN-F0 FN-F0 Ctrl-Alt-< Ctrl-Alt-> Panasonic FN-F2 FN-F2 Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup Samsung* setup screen option setup screen option Sanyo setup screen option setup screen option Sharp dip switch to CRT dip switch to LCD Sun SPARC- DataviewCtrl-Shift-M Ctrl-Shift-M Tandy** Ctrl-Alt-Insert Ctrl-Alt-Insert setup screen option setup screen option Tangent FN-F5 FN-F5 Texas Instru- ments*setup screen option setup screen option Top-Link* ** setup screen option setup screen option FN-F6 FN-F6 Toshiba* ** Ctrl-Alt-End Ctrl-Alt-Home FN-End FN-Home FN-F5 FN-F5 setup screen option setup screen option Twinhead* FN-F7 FN-F7 FN-F5 FN-F5 Automatic Automatic WinBook Ctrl-Alt-F10 Ctrl-Alt-F10 Wyse software driven software driven Zenith** FN-F10 FN-F10 FN-F2 FN-F2 ComputerKey command to activate portKey command to de-activate port
50 Appendix * These manufacturers have models that automatically send video to the external CRT port when some type of display device is attached. ** These manufacturers offer more than one key command depend- ing on the computer model.FN-F1 FN-F1 Zeos** Ctrl-Shift-D FN-F1Ctrl-Shift-D FN-F1 ComputerKey command to activate portKey command to de-activate port
51 Using Video Mirroring with a PowerBook Computer When you turn video mirroring (called SimulScan in newer Pow- erBooks—see below) on, the projector displays the same informa- tion that appears on your PowerBook’s built-in screen. When video mirroring is off, the projector acts like a separate display. To turn on video mirroring for the first time: 1Open the Monitors control panel; click on Monitor 2. 2Set the number of colors you want. 3Open the Control Strip, then click on the monitor icon. 4Select “Turn Video Mirroring On.” Now you can turn video mirroring on and off from the Control Strip without having to open the Monitors control panel again. When using video mirroring and high color graphics such as slide shows, the projected image occasionally might turn black and white. If this happens, perform the following steps: 1Turn off video mirroring. 2Open the Monitors control panel. 3Move the white menu bar to Monitor 2 to set the projector as the primary monitor. 4Restart the PowerBook. Using SimulScan Some newer PowerBooks display images on an external monitor or projector differently than previous ones. When using SimulScan, the projector displays the same information that appears on your PowerBook To select SimulScan: 1Open the Control Panel, then double-click Monitors and Sound. 2In the Resolution list, choose the SimulScan mode, then click OK. 3If this changes your display settings, a dialog box appears. Click OK to confirm the change.