InFocus LP 260 Projector User Manual

							13
Using the Remote Control
To control the computer ’s mouse from the projector ’s remote or 
keypad, you must connect one of the Control cables to the com-
puter. See page 7 for details. 
Turn the remote on using the 
on/off button on the side of the 
remote. Point the remote control at the projection screen or at the 
front of the projector (not at the computer). The range for opti-
mum operation is about 16 feet and 60 degrees from the front of 
the projector (see Figure 10). If you point the remote at the projec-
tion screen, the distance to the screen and back to the projector 
must be less than or equal to 16 feet. For best results, point the 
remote directly at the projector.
FIGURE 10
Remote range
60º
16.4’ (5m) 
						

							14
Using the Projector
F
IGURE 11
Remote control
Press anywhere on the edge of the point button to move the cur-
sor on the screen. You can move the cursor at any angle by press-
ing the corresponding edge of the button. See “Using the Keypad 
and Remote Buttons” starting on page 15 for a description of the 
function buttons.
If you are creating presentations in Microsoft
® PowerPoint®, you 
can use the remote’s 
right click, select, and point buttons to navi-
gate through your presentation while in Slide Show mode. To 
configure PowerPoint for this, choose Options from the Tools 
menu, click the View Tab, de-select the “Popup Menu on Right 
Mouse Click” option in the Slide Show section, then click OK. 
Then, when you’re in PowerPoint’s Slide Show mode, a left click 
advances to the next slide and a right click returns to the previous 
slide (other PowerPoint modes are not affected).
on
all offvolume
power
d.zoom
keystone
video
menumute
p-timer
blank freeze
auto imagenormal
computer
lock
on/off switch
point button
right click button
select button 
						

							15
Using the Keypad and Remote Buttons
FIGURE 12
Keypad buttons
Point button (1 button on remote, 4 buttons on keypad)
Press this button to navigate in the menus, make adjustments to 
menu items, or pan the image in Digital Zoom mode. When you 
press the center of this button on the remote, it works like the 
select button.
Select button
Use the select button to confirm a selection in the menus. See 
“Using the On-Screen Menus” on page 17.
Po w e r
Press this to turn the projector on and off. See page 9 for the 
power-up sequence and page 10 for the power off sequence.
Menu 
Press the menu button to open the on-screen menus. Press menu 
again to close the menus. For more information about the on-
screen menus, see page 17.
Normal
This feature restores the projector ’s factory set, default settings. It 
affects all the parameters in the Image menu except horizontal 
size and fine sync.
lampreadywarning
temp.lamp
replacepowermenu
normal source
widetele
point buttons (4)select button 
						

							16
Using the Projector
Source (keypad only) or Computer and Video (remote only)
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the 
source button on the keypad or the computer or video button on 
the remote. 
Ke y s t o n e
Use this button to adjust the keystone distortion. See page 12 for 
details.
d. zoom (digital zoom)
This allows you to zoom a computer image. See page 25 for 
details.
Vo l u m e  
To increase the volume, press volume +. To decrease the volume, 
press 
volume -.
Mute
Press mute to mute the sound. To restore the sound to its previous 
level, press the 
mute button again or the volume +/- button.
P-timer button
This feature allows you to set a timer. Press the p-timer button to 
display and start the timer. Press it again to stop the timer. Press it 
again to remove the timer from the display.
Blank 
When you press blank, the display and audio turn off and a blank 
screen is displayed until you press the 
blank button again or any 
function button.
Freeze
Press the freeze button to freeze the image on the screen. To 
unfreeze the image, press the 
freeze button again or any function 
button.
Auto Image
Press this button to automatically adjust the image. See page 23 
for details.
Right Click 
Use this button to compress the image in Digital Zoom mode (see 
page 25).  
						

							17
Using the On-Screen Menus
The projector
 has menus that allow you to make image adjust-
ments and change a variety of settings. Most of these adjustments 
aren’t available directly from the keypad. 
NOTE: Some menu items may be 
grayed out (dimmed) at certain 
times. This indicates the item is 
not applicable to your setup or the 
item is not enabled until another 
selection is made.
To open the on-screen menus, press the menu button on the 
remote or keypad. A red frame appears around the selected 
menu. Use the 
point buttons on the remote or keypad to move the 
cursor left and right. To select an item, press the 
select button on 
the remote or keypad.
FIGURE 13
Computer menus
F
IGURE 14
Keypad and remote navigation and selection buttons
To change a menu setting, use the up and down point buttons to 
move the cursor up and down to the item you want to change 
(the pointer changes to a red arrow), then use the left and right 
point buttons or the select buttons to adjust a setting. All changes 
are saved when you close the menus.
To access another menu, use the up 
point button to return to the 
menu bar, then use the right and left 
point buttons to move to the 
desired menu (you may need to Quit out of a menu before navi-
gating to the top menu.)
computer
auto
PCscreenlanguage
setting position system mode
image image
adjust
powermenu
normalmode
point buttons (4)
select button
point button 
						

							18
Using the Projector
Computer Adjustments
Select Computer mode by pressing the 
source button on the key-
pad, pressing the 
computer button on the remote, or clicking the 
Computer icon in the menu. When you select Computer, the cur-
rent mode display appears, showing details of the connected 
computer.
System Menu
The projector automatically adjusts to most incoming computer 
signals and projects the image without any user interaction. If a 
problem is encountered, the message “Go to PC adj.” may appear 
and the settings must be input manually. If the message “No sig-
nal” appears, verify the connections between the projector and 
the computer. See Troubleshooting on page 39 for more informa-
tion.
To select the computer system manually:
1Select the System menu (see “Using the On-Screen Menus” on 
page 17 for menu navigation details).
The “System” menu appears.
system menu 
						

							19
2Press the point down button, move the arrow to the system you 
want to select, then press the 
select button. 
These systems are set up using the PC Adjustment menu.
PC Adjustment
NOTE: This feature is not avail-
able when RGB, HDTV1035i, or 
HDTV1080i is selected in the Sys-
tem menu.
The projector automatically adjusts to most incoming computer 
signals and projects the image without any user interaction. 
However, some computers employ unique signal formats that the 
projector cannot handle properly. These images may flicker or 
appear non-synchronized. The PC adjustment feature allows you 
to specify parameters to match the unique signal formats and 
save and restore five different unique settings.
1Select the PC Adjust menu.
The “Where to reserve” menu appears.
2Select where to save the settings. “Free” indicates no settings 
have been saved; “Stored” indicates settings have been saved.
The “Parameter adjustment” menu appears.
PC adjust menu 
						

							20
Using the Projector
3Move to the parameter you want to change using the point up/
down
 buttons, and adjust each setting using the point right/left 
buttons.
4Navigate to “Save” and press the 
select button.
The parameter is memorized in the selected mode.
5To activate the mode, select it in the System Select menu (see 
“System Menu” on page 18.)
To t a l  L i n e s
The number of vertical lines. 
Horiz. Size
The number of dots in one horizontal period.
H Position/V Position
The left/right and up/down position of the image.
Clamp
The clamp level. If the image has dark bars, use this adjustment. 
						

							21
Display area
The area displayed by the projector. Point the arrow at the Dis-
play area option and press the 
select button to open a dialog box 
where you can select the resolution from a list, or adjust the value 
with the left and right 
point buttons.
Full Screen
Select On to resize the image with a 4x3 aspect ratio.
After adjusting the settings, press Save to save the settings, press 
Reset to recall the saved settings, press Mode Free to clear the 
previously saved settings, and press Quit to close the menu. 
						

							22
Using the Projector
Image Menu
The Image menu allows you to manually adjust the image.
1Select the Image menu.
The “Image Adjustments” menu appears.
Fine sync
Adjust the sync as necessary from 0 to 255 to eliminate flicker in 
the image.
Horiz. Size
Press the point buttons to adjust the number of dots in one hori-
zontal period.
Color Balance (Red, Green, Blue)
Press the point left button to lighten the color and the point right 
button to deepen the color from 0 to 63.
Contrast
Press the point left button to decrease the contrast and the point 
right
 button to increase the contrast from 0 to 63.
Brightness
Press the point left button to darken the image and the point right 
button to lighten the image from 0 to 63.
image menu