Iiyama Prolite P1905s 1 User Manual

ENGLISH
Put the monitor on a stable surface. The monitor may cause injury or damage if it 
falls or is dropped. 

ENGLISH
CONTROLS AND CONNECTORS
 
7     BEFORE YOU OPERATE THE MONITOR
 Power Switch

 (     ) / Power Indicator
   Blue:  Normal operation
   Orange: Power Management
      The monitor enters into power management mode which reduces the power 
    consumption to less than 1W when receiving no horizontal and/or vertical sync  
  signal.
 Select / Auto Image Adjust Button (      ) 
 Scroll Up / Volume Button () 
  Scroll Down Button / Brightness/Contrast short cut keys ( 
)
 Menu Button

(      )...

ENGLISH
CONNECTING YOUR MONITOR
  Ensure that both the computer and the monitor are switched off.
  Connect the computer to the monitor with the signal cable.
  Connect the monitor to the audio equipment with the Audio Cable for computer when using the 
audio features.
  Connect the Power Cable to the monitor fi rst and then to the power supply.
  Power of the monitor and the computer is turned on.
NOTE 

ENGLISH

ENGLISH
BEFORE YOU OPERATE THE MONITOR     10
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite PB1705S

ENGLISH
11     OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT 
TIMING shown on page 26. You are also able to adjust the picture by following the button operation 
shown below. For more detailed adjustments, see page 16 for SCREEN ADJUSTMENTS.
 Press the 1Button to start the On Screen Display feature. There are additional 
Menu items which can be switched by using the 
 /  Buttons.  
B  Select the Menu item...

ENGLISH
OPERATING THE MONITOR     12
ADJUSTMENT MENU CONTENTS
You can skip the Menu items and display an adjustment scale directly by using the following button 
operations.
z Auto Image Adjust : Press the 
2
Button when the Menu is not displayed.
Direct
*   For best results, use the Auto Image Adjust in conjunction with the adjustment pattern. See page 16 
for SCREEN ADJUSTMENTS.
Adjustment Item Problem / Option                       Button to Press
Contrast / Brightness
Direct
Too dark 
Too bright...

ENGLISH
Adjustment Item Problem / Option                                 Button to Press
Color Adjust
Cool
Bluish white (9300K)
Green Red
BlueToo weak
Too strong User Color
13     OPERATING THE MONITOR
Input Select
When only one of the two signal inputs is connected to the signal source, the one connectedis 
automatically selected. Input Select function is not available if there is no signal input from 
theselected connector or during the power management mode.
NOTE
Select the D-sub input.     
Select...

ENGLISH
Adjustment Item Problem / Option                       Button to Press
Setup Menu
Language Select
English
DeutschEnglish
German Français FrenchFinnish
Simplifi ed Chinese 
Italiano ItalianTraditional Chinese Español Spanish
Adjustment Item Problem / Option                       Button to Press
Manual Image AdjustOnly Analog  Input
Fine Tune Horizontal Size
Too left
Too right
Too low
Too highH. Position
V. Position
Too narrow
Too wide
To correct fl ickering text or lines
OSD TIMEOUTH. PositionOSD is...

ENGLISH
Direct
You can display an adjustment scale directly by using the following button operations.
z  KEY LOCK (OSD and POWER SWITCH) :            
      Lock : Press the 
1
Button and  Button and hold down for 10 seconds.
      Unlock : Press the 
1
Button and  Button and hold down for 10 seconds.
z  ECO :   On : Press the 
1
Button and  Button at the same time when the Menu is not displayed.
      Off : Press the 
1
Button and  Button at the same time when the Menu is not displayed.
15     OPERATING...